search

retro-esp32 / RetroESP32

Retro ESP32 is a turbo charged Odroid Go Launcher, Emulator and ROM Manager
Creative Commons Attribution Share Alike 4.0 International
590 stars 92 forks source link

Will esp32S3 be supported later? #103

Open FantasyGmm opened 2 years ago

FantasyGmm commented 2 years ago

ESP32S3 ESP-IDF stable version 4.4 has been released, most features are available, SD card is not supported. ESP32S3 more powerful than the old ESP32 , built-in PSRAM and FLASH takes up less PCB space

32teeth commented 2 years ago

@FantasyGmm

Yes, we are looking into the S3 (40+ pins wow), as well as the H2

FantasyGmm commented 2 years ago

Very good, I modified the PCB and schematic of ESPlay Micro, changed the main control to ESP32, and the screen to ST7789V, which is an IPS screen, I believe the display effect will be good, I am waiting for the PCB, if there is no problem, I will upload it

pebri86 commented 2 years ago

Very good, I modified the PCB and schematic of ESPlay Micro, changed the main control to ESP32, and the screen to ST7789V, which is an IPS screen, I believe the display effect will be good, I am waiting for the PCB, if there is no problem, I will upload it

Wow nice to hear that, don't forget to take advantage of usb feature that esp32s3 has, so the board can be useful to make an usb gadget like directly connected to pc when accessing files or copy rom.

FantasyGmm commented 2 years ago

Yes, I use OTG and serial port, as far as I know S3 can support USB JTAG, debugging may be a lot easier

FantasyGmm commented 2 years ago

https://oshwlab.com/FantasyGM/esplay_micro_s3,I uploaded the schematic diagram and PCB on oshwlab, I used easyEDA design, so THERE are no other documents, and I am not a professional, so if there is something wrong in the schematic diagram or PCB design, please tell me and how to correct it, thank you

FantasyGmm commented 2 years ago

My PCB is still being manufactured, so it has not been tested