search

retro16 / acsi2stm

Atari ST ACSI to SD card converter with a STM32
GNU General Public License v3.0
150 stars 34 forks source link

ACSI2STM with GOTEK #69

Open Perceval78980 opened 3 months ago

Perceval78980 commented 3 months ago

Hi everyone, Maybe the question asked many times, I have an ACSI2STM which works fine and a GOTEK wich works fine too. If I start my atari 520ste with gotek only it's OK. If I start with ACSI2STM only same thing. But if I boot on ASCI the gotek is hidden and not work. Well, how to install floppy disk image software in my partition hard disk?

p0ke commented 3 months ago

Hello, Did you try to recap your psu ?

p0ke

Le 7 avril 2024 15:01:28 GMT+02:00, Perceval78980 @.***> a écrit :

Hi everyone, Maybe the question asked many times, I have an ACSI2STM which works fine and a GOTEK wich works fine too. If I start my atari 520ste with gotek only it's OK. If I start with ACSI2STM only same thing. But if I boot on ASCI the gotek is hidden and not work. Wellington, how to install floppy disk image software in my partition hard disk?

-- Reply to this email directly or view it on GitHub: https://github.com/retro16/acsi2stm/issues/69 You are receiving this because you are subscribed to this thread.

Message ID: @.***>

Perceval78980 commented 3 months ago

Hello. Good news! I replaced my microSD with autoboot by another one empty juste format in fat32. Next plug acsi2stm with this new card and start Atari without USB key in the GOTEK. Next step mount peripherals for showing the C partition. Next Step plug USB key inside the GOTEK and choose image disk. Then copy files from A to C. Or install software from A to C. And for the PSU no. When I bought the Atari, it seems like new one inside. It was à miracle. Just à little yellowing on top case and key caps. Thanks for your response. If you have a tips for working autoboot in C with Gotek I will be very happy.