search

retrofw / retrofw.github.io

RetroFW Firmware releases
457 stars 52 forks source link

RG-300 V1.3 - Boot issues #51

Open IZ2QDH opened 3 years ago

IZ2QDH commented 3 years ago

I tried to flash these RetroFW versions on my RG-300 V1.3 2019.6.3 RetroFW 2.1 Type 2B -> Stuck on boot logo RetroFW 2.1 Type 3B -> White screen RetroFW 2.2 Type 2A -> Black Screen RetroFW 2.2 Type 2B -> Stuck on boot logo, after some time appears screen about partitioning, reboots but stuck on boot logo RetroFW 2.2 Type 3B -> White screen Do i have to open the console to check which screen module is installed to know which RetroFW works? I noticed another issue has been created about this console https://github.com/retrofw/retrofw.github.io/issues/20 it has been closed as invalid but idk what does invalid means since no RetroFW works apparently on this model.

pingflood commented 3 years ago

In your device you should use the Type 2B, as it has booted to the setup.

By the description you gave, it sounds like the problem is in your SD card.

So it's advised to try with another one before you try to do anything else in your device.

IZ2QDH commented 3 years ago

I tried with other SD card and it was still stuck on boot logo. Then i took out the external SD card... Boom! Boots and working. Used old SD, works perfect. It was the other SD that was doing something to first boot. Thanks