Open mamejay opened 1 year ago
Hello,
There should be 9 files in the Zip file.
Only top silkscreen exist.
Let me know when it will be built!
Thank you!
Francis Gradel, B.Eng.
@.> @.
De : mamejay @.> Envoyé : 13 avril 2023 10:18 À : retronicdesign/AmigaExternalFloppyAdapter @.> Cc : Subscribed @.***> Objet : [retronicdesign/AmigaExternalFloppyAdapter] Is the silkscreen missing? (Issue #1)
Hello there. I started having a look at this as I wish to make myself one. Is the top silkscreen file missing for the gerber files? I can only see the following 6 files.
Thanks!
AmigaExternalFloppyAdapter_V1_3-B_Cu.gbr AmigaExternalFloppyAdapter_V1_3-B_Mask.gbr AmigaExternalFloppyAdapter_V1_3-F_Cu.gbr AmigaExternalFloppyAdapter_V1_3-F_Mask.gbr AmigaExternalFloppyAdapter_V1_3-NPTH-drl_map.gbr AmigaExternalFloppyAdapter_V1_3_Edge_Cuts.gbr
— Reply to this email directly, view it on GitHub https://github.com/retronicdesign/AmigaExternalFloppyAdapter/issues/1 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AENOLG5JROF7W3ZW54JD5VDXBADHVANCNFSM6AAAAAAW5E36UM . You are receiving this because you are subscribed to this thread. https://github.com/notifications/beacon/AENOLG3D5VHL5JL3SUG4CZLXBADHVA5CNFSM6AAAAAAW5E36UOWGG33NNVSW45C7OR4XAZNFJFZXG5LFVJRW63LNMVXHIX3JMTHGGVIN5U.gif Message ID: @. @.> >
Thanks for that. I had to rename the files and make shorter names and then they imported correctly into JLCPCB. Sorry about the silly question.
Don’t forget to send me pictures of your final board and setup!
:)
Thank you!
Francis Gradel, B.Eng.
@. @.>
De : mamejay @.> Envoyé : 13 avril 2023 21:03 À : retronicdesign/AmigaExternalFloppyAdapter @.> Cc : Retronic Design @.>; Comment @.> Objet : Re: [retronicdesign/AmigaExternalFloppyAdapter] Is the silkscreen missing? (Issue #1)
Thanks for that. I had to rename the files and make shorter names and then they imported correctly into JLCPCB. Sorry about the silly question.
— Reply to this email directly, view it on GitHub https://github.com/retronicdesign/AmigaExternalFloppyAdapter/issues/1#issuecomment-1507783188 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AENOLG755TIR2VFB2PB66TLXBCO4BANCNFSM6AAAAAAW5E36UM . You are receiving this because you commented. https://github.com/notifications/beacon/AENOLG5RFPRYZUZD2KQZWCDXBCO4BA5CNFSM6AAAAAAW5E36UOWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSZ33ZBI.gif Message ID: @. @.> >
Hi, have a same problems, do you share a correct zip for JLCPCB?
Fixed. It's in the ZIP file but was'nt on the repository root.
Hello there. I started having a look at this as I wish to make myself one. Is the top silkscreen file missing for the gerber files? I can only see the following 6 files.
Thanks!
AmigaExternalFloppyAdapter_V1_3-B_Cu.gbr AmigaExternalFloppyAdapter_V1_3-B_Mask.gbr AmigaExternalFloppyAdapter_V1_3-F_Cu.gbr AmigaExternalFloppyAdapter_V1_3-F_Mask.gbr AmigaExternalFloppyAdapter_V1_3-NPTH-drl_map.gbr AmigaExternalFloppyAdapter_V1_3_Edge_Cuts.gbr