search

revarbat / snappy-reprap

The world's most 3D printable 3D printer. (Guinness Book of World Records 2017 & 2018)
http://revarbat.github.io/snappy-reprap
GNU General Public License v2.0
499 stars 172 forks source link

BOM links #29

Closed Erhannis closed 5 years ago

Erhannis commented 5 years ago

Quite a few amazon links in the V3.0 BOM have gone dead; it'd be nice if those got updated. This may be some people's first printer they build, and they may not be confident they understand how to choose components. Also, I note that the linked suggested power supply only goes up to 120W, so I'm not sure what to get if I have a heated bed and need 300W.

ManuGithubSteam commented 5 years ago

Sadly wiki pages do not have pull requests...

Not even sure if the projet is still alive...

Anyway

Here are mine:

Qty Description Total Cost Where Found 1 Power Supply, 120W. (300W w/ Heated Bed) ~$17
https://www.amazon.de/dp/B06XMQF4RT/?coliid=I11L8DRG7FGXGS&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it https://www.amazon.de/dp/B01NAU78TJ/?coliid=I2ZQVD1J3L5TTX&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it

1 Controller electronics. (RAMPS1.4+2560+Pololus) ~$30
https://www.amazon.de/dp/B06XSZ9M77/?coliid=I27A2HBLU1ZE55&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it 3 Mechanical microswitch end-stops and wiring. ~$

5 NEMA17 Stepper Motors, 40mm length, 1m cable ~$58
https://www.amazon.de/dp/B07DN97BGL/?coliid=I2MA092WJNIY8B&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it

1 e3dv6lite clone hot end w/heater, thermistor. ~$33
https://www.amazon.de/dp/B018E6THV4/?coliid=I2MXHWAUPOAKNR&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it

2 40mm 12v 0.15A 2-pin cooling fan, 10mm thick. ~$16
https://www.amazon.de/dp/B01CZFUOD0/?coliid=I21VE4U9NBKADG&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it

1m Wire, dual conductor, 22 gauge, stranded
https://www.amazon.de/dp/B00O7HPL5Q/?coliid=I27HGBPA3QF5KJ&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it

1 Heated Build Platform. (optional) ~$16
Not so sure about this one, did not use one myself. https://www.amazon.de/Homyl-3D-Drucker-Isolierung-Baumwolle-W%C3%A4rmed%C3%A4mmung-wie-beschrieben/dp/B07K31PJV4/ref=sr_1_14?s=diy&ie=UTF8&qid=1545150743&sr=1-14&keywords=3d+drucker+heizbett

You'll need the following Hardware to build the cartesian frame:

Qty Description Total Cost Where Found 3.1Kg Plastic Filament. (@ $13/Kg) ~$41 Amazon.com 1 Extruder Drive Gear ~$ 3
https://www.amazon.de/dp/B06XBZ86Y3/?coliid=I2U35GP298WWX7&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it

1 686 bearing. ~$ 3 https://www.amazon.de/dp/B00K86FC86/?coliid=I39OKM2B719X82&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it

1 Borosilicate glass build platform. (214x200mm) ~$12
https://www.amazon.de/dp/B07BM9MFKJ/?coliid=I3LIP0DSIRR3QB&colid=1JQGPCRENC6K9&psc=0&ref_=lv_ov_lig_dp_it

6 3mm x 12mm socket head screws. ~$ 1 Everywhere. 6 3mm nuts. ~$ 1 Everywhere.

ManuGithubSteam commented 5 years ago

NOTE:

The motors are the wrong ! version!!!

revarbat commented 5 years ago

I've updated the links in the BOM.