search

rfdiazpr / sketchyphysics

Automatically exported from code.google.com/p/sketchyphysics
1 stars 0 forks source link

MAC- No Console with any version of SP #31

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1. Open Sketchup.
2. Add controller name to a joint (yes, joint is attached to a body).
3. Press play.

What is the expected output? What do you see instead?

You are supposed to see a control panel with slider controls when you hit
play if you provide a controller name for a joint. 

I name the joint, but when I hit play the control panel is still blank (see
attached image).

What version of the product are you using? On what operating system?

I have tried every available SketchyPhysics version available for my OS,
MAC OSX (v3a2, v3b, v3RC1, v3X).

Please provide any additional information below.

*Note in upper left-hand side of model it says "Requires SketchyPhysics3
RC1". As I said before, I have the same results (blank control panel) no
matter what version of SP I am running.

I have seen NO information that regards the solution of this issue. I've
seen other reports similar, but not sure if problems others experienced
were quite the same.

Original issue reported on code.google.com by raff2...@gmail.com on 8 Aug 2009 at 1:00

Attachments:

GoogleCodeExporter commented 8 years ago 
Is this the 'Webdialog...dirty' issue?
open the Ruby console.  If there's an error message, check the Ruby discussion 
for a
solution.

Original comment by DR01AL...@YAHOO.COM on 15 Aug 2009 at 3:08

GoogleCodeExporter commented 8 years ago 
No, this is not the "Webdialog...dirty" issue. 

This is an issue with the Control panel not appearing when you click play after
assigning a controller name to a joint. 

No matter what I do I cannot get SP to show a control panel, and because of this
Sketchy Physics is useless. If you can't control a joint what good is SP?

I opened the ruby console, and got no error messages at all. 

Any ideas folks??

Original comment by raff2...@gmail.com on 30 Aug 2009 at 6:25

GoogleCodeExporter commented 8 years ago 
How do i get SketchyPhysics to show up in the sketchup app.? i activated it in 
the
get info plugin window, i can see all the files...what's the trick...help!!

Original comment by famusg...@gmail.com on 4 Oct 2009 at 7:04

GoogleCodeExporter commented 8 years ago 
I also have the same problem - the controller panel will not bring up the slide 
bar
for the joints which I name under the "controller" section in the UI panel.  I 
also
get an error message when I try to name joints (please see attached screen 
shot).  I
don't know how to fix it.  I have tried reinstalling many times!

Original comment by mr_men...@hotmail.com on 9 Oct 2009 at 7:15

GoogleCodeExporter commented 8 years ago 
I also have the same problem - the controller panel will not bring up the slide 
bar
for the joints which I name under the "controller" section in the UI panel.  I 
also
get an error message when I try to name joints (please see attached screen 
shot).  I
don't know how to fix it.  I have tried reinstalling many times!

Original comment by stephpoy...@gmail.com on 9 Oct 2009 at 7:17

Attachments:

GoogleCodeExporter commented 8 years ago 
Try naming your joints like this:
slider('name')

Original comment by glath...@gmail.com on 17 Oct 2009 at 4:31

GoogleCodeExporter commented 8 years ago 
some joints give directly a slider in the control panel like a piston, a motor 
or an
servo.
But not every joint. and a servo or slider-joint don't give it

Original comment by sasja.de...@gmail.com on 4 Jan 2010 at 3:38

GoogleCodeExporter commented 8 years ago 
I'm having a problem with the ui inspector to change joint settings, but it 
doesnt work and the ruby console constantly spams the message "The webdialog is 
dirty!!!!"
Is there a fix to this? I downloaded every version of SP but it keeps happining!
I CAN'T MAKE A STUPID CAR WITH THIS PROBLEM! Any way to fix it!?

Original comment by austinth...@gmail.com on 20 Apr 2012 at 1:23

GoogleCodeExporter commented 8 years ago 
This is what i'm seeing!

Original comment by austinth...@gmail.com on 20 Apr 2012 at 1:24

Attachments:

GoogleCodeExporter commented 8 years ago 
Did you Fix it yet?

Well if you didn't I may have the answer, have you tried the "special names" it 
gives you

for example:

Slider(xname)
Oscillator(x)

I found this helps it appear with a name... hope it helps!

Original comment by KRAAdi...@gmail.com on 9 Jun 2014 at 10:30