Closed Corsair-63 closed 10 months ago
Excellent. Thank you Corsair-63
Also, I noticed that the Spanish translation has not been updated or there are some messages nor translated neither updated translation. I did a review some days ago in order correct either set to more Spanish seaman way.
Double check at home with my desktop computer:
Windows 11 Pro x64 ver 22H2 22621.2215 OCPN 5.8.4-0+1637c28 watchdog plugin 2.4.70.0 VDR plugin 1.3.28.0 AIS / GPS receiver: COMAR SLR200NG via wired network (via UDP)
Used VDR plugin to recreate the issue with the vdr file attached in my previous message.
I have to say that same behavior as the computer on board, same result, apparent wind shown but true relative and true absolute, it immediately triggers the alarm and no more wind speed updates the alarm in WD (also, same figures displayed in red), always proper wind speed and direction shown in dashboard.
More tests with a previous version of watchdog. https://www.cruisersforum.com/forums/f134/watchdog-plugin-150313.html#post3819236
I did yesterday the test for the WD course alarm in my desktop and was successful, I posted in that thread. today I'm going to test on board, and we'll see if goes as expected and would work properly. if would go wrong I'll open new issue in this forum, if goes well I´ll post in above forum.
Same reproduced in version 2.4.100.0
Windows 11 Pro ARM64 ver 22H2 22621.2215 OCPN 5.8.4-0+1637c28 watchdog plugin 2.4.70.0 VDR plugin 1.3.28.0 Multiplexer Shipmodul MiniPlex-3E-N2K - Firmware Version=3.18.2 GNSS - Digital Yacht GPS 160 at 38400 bps via multiplexer Auto pilot / Compass - RayMarine via Sea Talk via Multiplexer Wind vane - Nasa - Clipper-Target-Cruiser-V2.0 at 4800 via Multiplexer Depth STW, Seawater temp, and some other data - Furuno GP1971F - Plotter/RADAR/Ech-sounder via N2K via multiplexer AIS Rec / 2nd Echo sounder /2nd GNSS - at 38400 via multiplexer