search

rgleason / watchdog_pi

watchdog plugin for opencpn
GNU General Public License v3.0
1 stars 9 forks source link

Test Bugs Corsair #67

Closed rgleason closed 7 months ago

rgleason commented 10 months ago

https://www.cruisersforum.com/forums/f134/watchdog-plugin-150313.html

Tested on board version WD 2.4.73.0

Windows 11 Pro ARM64 Spanish, latest patch Sep 12, 2023

same behavior as desktop at home, tested with all devices enable only Echo-sounder tested one by one.

not able to set [wind](https://www.cruisersforum.com/forums/tags/wind.html) as True apparent neither True absolute.
again, disappeared the [depth](https://www.cruisersforum.com/forums/tags/depth.html) reading while is dashboard is shown, attached three screenshots one with ES 0183 > Off > ES N2k. showing the [alarm](https://www.cruisersforum.com/forums/tags/alarm.html) and dashboard showing the correct reading.
course not able to set the course reading when click on actual course, always set to COG.

attached log file with the only input from UDP and set in OCPN the priority of signals.

WD_No_ES WD_ES0183 WD_ESN2K Test_WD24730.txt

Corsair-63 commented 10 months ago

re-tested today on board with the NMEA 0183 Echo-sounder only and set to:

Corsair-63 commented 7 months ago

Windows 11 Pro ARM64 ver 22631.2861 OCPN 5.9.0-0+948.1ffe2ef Watchdog 2.4.103

tested with both ES direct 0183 and N2K via multiplexer to 0183. one with value in the fourth field & the other with no value.

Depth displayed in both situation in WD, thanks.

rgleason commented 7 months ago

Corsair, thank you for your excellent reporting and carry through. It is much appreciated. If you notice anything else about WD please advise, via the same media.and process. Good job.

Since you are the OP (original poster) it is normally you that should close this Issue. Ok?

Corsair-63 commented 7 months ago

I cannot close it, because the original one was done by you from mine in OCPN forum. I've tried but not able to close it.