search

rgomezjnr / GcodeFilenameFormatPlus

Cura plugin for controlling output filename format, now with multi-extruder and OctoPrint support
https://marketplace.ultimaker.com/app/cura/plugins/rgomezjnr/GcodeFilenameFormatPlus
GNU Lesser General Public License v3.0
30 stars 4 forks source link

format change not applied #15

Open ipa64 opened 12 months ago

ipa64 commented 12 months ago

Hi, Cura 5.4 Mac Ventura I make changes, but they are not applied, either for Save Project or Print with Octoprint Try to slice after changes, but still nothing

rgomezjnr commented 11 months ago

Hello can you try selecting the Save to Disk button? I don't think GFF+ works with the Print with Octoprint option.

image

ipa64 commented 11 months ago

Hello, Thank you for your interest in this issue.In both case it’s the same behavior, change are not updated.Cura 5.4 Macbook Pro Macos VenturaThank youPatrickLe 5 sept. 2023 à 23:21, Robert Gomez, Jr. @.***> a écrit : Hello can you try selecting the Save to Disk button? I don't think GFF+ works with the Print with Octoprint option.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

rgomezjnr commented 11 months ago

Weird GFF+ 1.0.0 is working for me in Cura 5.4.0 on Mac.

Can you confirm the GFF+ plugin is installed and loaded?

Can you attempt to replicate the issue and paste the contents of ~/Library/Application Support/cura/5.4/cura.log please?

Can you share a screenshot of the save dialog?

What printer are you using?

ipa64 commented 11 months ago

Le 7 sept. 2566 E. B. à 10:26, Robert Gomez, Jr. @.***> a écrit :

Weird GFF+ 1.0.0 is working for me in Cura 5.4.0 on Mac.

Can you confirm the GFF+ plugin is installed and loaded?

Can you attempt to replicate the issue and paste the contents of ~/Library/Application Support/cura/5.4/cura.log please?

Can you share a screenshot of the save dialog?

What printer are you using?

— Reply to this email directly, view it on GitHub https://github.com/rgomezjnr/GcodeFilenameFormatPlus/issues/15#issuecomment-1709421676, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACO7IAMRQL65TGN24ITTTOLXZE5H5ANCNFSM6AAAAAA4HHRVPQ. You are receiving this because you authored the thread.

Hi, Bellow what you ask for In attachment Cura.log

In fact, I noticed, if I exit and reload Cura, dialogue is still on the default format, mods was not saved.

Feel free to ask for any others informations Patrick

Yes plugins is installed, what do you mean by loaded ?

By default  Then I make modification Save to disk (nothing has changed)  

fluxor99232 commented 10 months ago

Doesn't work for me either. Same setup.

rgomezjnr commented 10 months ago

Doesn't work for me either. Same setup.

What Cura version are you using? What printer profile are you using?

Can you attempt to replicate the issue and paste the contents of ~/Library/Application Support/cura/5.4/cura.log please?

RoCkHeLuCk commented 6 months ago

Good evening to all. I started using this plugin today, and I discovered that after making the settings and trying to save a project it doesn't work, but after restarting "Cura 5.6" it starts working perfectly. I hope this helped you locate this problem.

Fullyottermatic commented 5 months ago

Good evening to all. I started using this plugin today, and I discovered that after making the settings and trying to save a project it doesn't work, but after restarting "Cura 5.6" it starts working perfectly. I hope this helped you locate this problem.

Echoing this, it wasn't working for me, even after restarting Cura. But once I saved, closed, and reopened the project, it seemed to work fine.