Error connecting DP: cannot read IDR. Potential issue with stm32f0/similar chips

New YAPicoprobe ( Pico) out of the box, fresh connectors and the latest release bin ( yapicoprobe-0120-pico-f726bca.uf2 )

When launching OpenOCD openocd -f interface/cmsis-dap.cfg -f target/stm32f0x.cfg

it errors out with

Info : SWCLK/TCK = 0 SWDIO/TMS = 0 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : clock speed 1000 kHz
Error: Error connecting DP: cannot read IDR

enabling more debug print shows complete mayhem

Debug: 617 742 cmsis_dap.c:1100 cmsis_dap_swd_switch_seq(): JTAG-to-SWD
Debug: 618 742 cmsis_dap.c:872 cmsis_dap_swd_read_process(): SWD ack not OK @ 0 JUNK
Debug: 619 744 cmsis_dap.c:1105 cmsis_dap_swd_switch_seq(): JTAG-to-DORMANT
Debug: 620 744 cmsis_dap.c:1120 cmsis_dap_swd_switch_seq(): DORMANT-to-SWD
Debug: 621 745 cmsis_dap.c:872 cmsis_dap_swd_read_process(): SWD ack not OK @ 0 JUNK
Error: 622 746 adi_v5_swd.c:366 swd_connect_single(): Error connecting DP: cannot read IDR
Debug: 623 746 command.c:544 run_command(): Command 'dap init' failed with error code -4
User : 624 746 command.c:608 command_run_line(): 
Debug: 625 746 command.c:544 run_command(): Command 'init' failed with error code -4
User : 626 746 command.c:608 command_run_line(): 
Debug: 627 746 target.c:2199 target_free_all_working_areas_restore(): freeing all working areas
Debug: 628 747 cmsis_dap.c:1110 cmsis_dap_swd_switch_seq(): SWD-to-JTAG

$  openocd -v
Open On-Chip Debugger 0.12.0

Status LED keeps blinking. Power levels are correct and there are no shorts in SWDIO/CLK - continuity also verified proper.

Is there something that needs attention on non-rp2040 debug targets? This seems like PEBKAC/misconfiguration

Thanks in advance!

rgrr / yapicoprobe

Error connecting DP: cannot read IDR. Potential issue with stm32f0/similar chips #110