search

rianadon / opensprinkler-card

Home Assistant card for collecting OpenSprinkler status
Other
66 stars 8 forks source link

OpenSprinkler Card Totally Messed up #22

Open MonsterVic opened 6 months ago

MonsterVic commented 6 months ago

Hi !

My OpenSpinkler Card is totally messed up, see the screenshot below. Let me know if you need any more info

image

NatroNx commented 5 months ago

Same here :( stopped working

NatroNx commented 5 months ago

Same here :( stopped working

It is working fine. I've used a version of Ospi (openprinkler on raspberry PI) from opensprinklershop which had problems.

Switches back to the original firmware and everything is back to normal

MonsterVic commented 5 months ago

Same here :( stopped working

It is working fine. I've used a version of Ospi (openprinkler on raspberry PI) from opensprinklershop which had problems.

Switches back to the original firmware and everything is back to normal

Sorry, it's not clear. What kind of firmware are you talking about ?

rianadon commented 5 months ago

Interesting, maybe the sensors that are populated are related to the firmware OpenSprinkler is running? From the screenshot it looks like there are some unknown entities.

Fwiw I don't see this issue (which makes it very difficult to debug and fix the problem) and I'm using a pretty old version of firmware myself (haven't updated since setting up the device). I'm also still running the 2024.5 release of Home Assistant. However, this looks too drastic a mess-up to be related to a Home Assistant upgrade.

MonsterVic commented 5 months ago

Interesting, maybe the sensors that are populated are related to the firmware OpenSprinkler is running? From the screenshot it looks like there are some unknown entities.

Fwiw I don't see this issue (which makes it very difficult to debug and fix the problem) and I'm using a pretty old version of firmware myself (haven't updated since setting up the device). I'm also still running the 2024.5 release of Home Assistant. However, this looks too drastic a mess-up to be related to a Home Assistant upgrade.

From the comments above it seems I'm not the only one having this issue, I'm also using Opensprinkler on an RPI W zero. I have installed it last year around July with opensprinkler firmware 2.2.0(2) and haven't upgraded it since. Back in time it was fine didn't have this issue, but once after a HA update the issue appeared, I don't know when it was since it's like that for a while.

Tried to remove the card and re-add but it's the same. Any advice what else to try ?

MonsterVic commented 5 months ago

Okay I found what was the problem. These were all unavailable entities, like programs I have added earlier and deleted. It seems the deletions are not synced back and messing up the card ?