search

ricardoquesada / bluepad32

Bluetooth gamepad, mouse and keyboard support for ESP32 and PicoW
https://bluepad32.readthedocs.io/
Other
612 stars 64 forks source link

[Bug]: 4.0.2 reports weird 99.99.99 version after flashing #90

Closed mneuhaus closed 7 months ago

mneuhaus commented 7 months ago

What happened?

When i flash the latest release on to my Nina Chip and try to verify the version number with arduino-fwuploaded i get 99.99.99 back.

Bluepad32 Version

4.0-beta2

Bluepad32 version custom

latest 4.0.2 release

Bluepad32 Platform

Arduino + NINA

Platform version

not relevant

Controller

not relevant

Microcontroller

ESP32

Microcontroller board

Arduino Nano RP2040 Connect

OS

None

Relevant log output

Version 4.0.2 gives weird 99.99.99 Version number:

(base) ➜  bluepad32-nina-v4.0.2 ./arduino-fwuploader firmware flash -b $BOARD -a $ADDRESS -i bluepad32-nina-full.bin
rp2040load 1.0.6 - compiled with go1.16.2
Loading into Flash: [==============================]  100%

Flashing progress: 99%
Upload completed!%                                                                                                                                                                                                     (base) ➜  bluepad32-nina-v4.0.2 ./arduino-fwuploader firmware get-version -b $BOARD -a $ADDRESS                   
rp2040load 1.0.6 - compiled with go1.16.2
Loading into Flash: [==============================]  100%

FIRMWARE-VERSION: 99.99.99
Firmware version installed: 99.99.99%

Version 3.20.3 works though: 

(base) ➜  bluepad32-nina-v4.0.2 ./arduino-fwuploader firmware flash -b $BOARD -a $ADDRESS -i bluepad32-nina-full-v3.10.3.bin 
rp2040load 1.0.6 - compiled with go1.16.2
Loading into Flash: [==============================]  100%

Flashing progress: 99%
Upload completed!%                                                                                                                                                                                                     (base) ➜  bluepad32-nina-v4.0.2 ./arduino-fwuploader firmware get-version -b $BOARD -a $ADDRESS                             
rp2040load 1.0.6 - compiled with go1.16.2
Loading into Flash: [==============================]  100%

FIRMWARE-VERSION: Bluepad32 for NINA v3.10.3
Firmware version installed: Bluepad32 for NINA v3.10.3%                                                                                                                                                                (base) ➜  bluepad32-nina-v4.0.2 


### Relevant sketch

_No response_
ricardoquesada commented 7 months ago

what are the values of $BOARD and $ADDRESS ?

ricardoquesada commented 7 months ago

also, the logs says that you installed v3.10.3

FIRMWARE-VERSION: Bluepad32 for NINA v3.10.3
Firmware version installed: Bluepad32 for NINA v3.10.3%
mneuhaus commented 7 months ago

Hey, sorry for the confusion, my Board and Address:

export BOARD=arduino:mbed_nano:nanorp2040connect
export ADDRESS=/dev/tty.usbmodem3132201

i'm working on a M1 Mac

the "first" part of that log above based on the bluepad32-nina-full.bin file is Version 4.0.2, which completed successfully but gave back that weird 99.99.99. Version.

Then i tried a bluepad32-nina-full-v3.10.3.bin file as a comparison which gave back the proper version number.

i saw yesterday, that you're deprecating the Bluepad32 for NINA-W10 boards branch of chips, could this be related?

ricardoquesada commented 7 months ago

mmm... weird. I'll double check it later today/tomorrow

ricardoquesada commented 7 months ago

I confirm that I can reproduce it

ricardoquesada commented 7 months ago

regression introduced between v4.0-beta1 and v4.0-beta2.

Probably the changes in console/uart triggered this regression