Battery voltage/current not working

richonguzman / LoRa_APRS_Tracker

LoRa APRS Tracker with Tx and Rx capabilities, Messages, Wx, Winlink and more...

MIT License

168 stars 45 forks source link

Closed lostdog2 closed 8 months ago

lostdog2 commented 8 months ago

I uploaded in the LILYGO T_BEAM433 MHz. The version of the board is a mystery:

the white label say '2ASYE-T-BEAM MODEL V1.1'
the text on PCB close to the antenna say 'AXP2101-V1.2' On the display, the voltage is always 0, current is always -3 mA. I tried to upload some different version of firmware, but the battery data are not showed. For some other firmwares I used the 1.2 version and is working.

Somebody can help me?

Many thanks

richonguzman commented 8 months ago

hi!

there you can select the board you have (V1_2) and upload it to work good.

lostdog2 commented 8 months ago

richonguzman,

Many thanks for you reply. I'm a newbie with vscode, platformio and T-BEAM.

So, I selected the firmware version but not the correct environment...

Now the battery voltage and percentage are correctly displayed.

Have a good day

Lostdog