no position when "Send our beacon to APRS-IS" on || Lilygo T3 v1.6.1

richonguzman / LoRa_APRS_iGate

LoRa APRS iGATE for ESP32 Based Board with Rx + Tx capabilities

MIT License

208 stars 65 forks source link

no position when "Send our beacon to APRS-IS" on || Lilygo T3 v1.6.1 #103

Closed Charly1000 closed 4 months ago

Charly1000 commented 4 months ago

env in Visual Stuio Code I'm using: ttgo-lora32-v21

I have set the beaconing menu to "Send our beacon to APRS-IS" to on and "...to RF" to off. It do not send the location to the APRS-IS network.

jclifford73 commented 4 months ago

See open issue #89 raised by me. The beaconing logic is broken. You may have the path set to blank and it will only beacon with path wide1-1 or maybe other parameters. 73 John GW4BVE

Charly1000 commented 4 months ago

None of the individual settings lead to the desired result. It doesn't work at all.

Charly1000 commented 4 months ago

RESOLVED. It works. I forgot to generate a passcode for config file: https://apps.magicbug.co.uk/passcode/index.php/passcode so there was no connection to APRS-IS network because of that.