search

richonguzman / LoRa_APRS_iGate

LoRa APRS iGATE for ESP32 Based Board with Rx + Tx capabilities
MIT License
247 stars 73 forks source link

Question: How do I setup 2024.11.06 for digi only? #199

Open AG7U opened 2 days ago

AG7U commented 2 days ago

I am currently using version 2024.01.12 for digi. On the screen I see Rx: 433.775 Tx: 433.775 << DigiRepeater >> The above on-screen message lets me know the TTGO-LoRa32 is operating as a digi.

When I attempt to setup 2024.11.06 for digi only I cannot replicate the above screen, and I am not sure if digi is setup correctly.

Is the igate_conf.json below correct for digi only? In version 2024.01.12 should I expect to see a screen like I see in version 2024.01.12? I do eventually see LoRa RX ----> LoRa Tx, which would suggest that digi is working.
How do I edit igate_conf.json to get the digipeater simplex green star? "overlay": "L", "symbol": "a", Can the on-screen WiFi: AP APRS-IS: OFF IP: 192.168.4.1 message be removed from the screen by toggling a setting in the igate_conf.json? Anything else I should do or know for digi only using version 2024.11.06?
Thank you.

{ "callsign": "AG7U-40", "wifi": { "autoAP": { "password": "1234567890", "timeout": 10 }, "AP": [] }, "beacon": { "latitude": 39.529639, "longitude": -104.824333, "comment": "LoRa APRS", "interval": 15, "overlay": "L", "symbol": "a", "path": "WIDE1-1", "sendViaAPRSIS": false, "sendViaRF": true }, "aprs_is": { "active": false, "passcode": "XYZVW", "server": "rotate.aprs2.net", "port": 14580, "filter": "m/10", "messagesToRF": false, "objectsToRF": false }, "digi": { "mode": 2, "ecoMode": false }, "lora": { "txFreq": 433775000, "rxFreq": 433775000, "spreadingFactor": 12, "signalBandwidth": 125000, "codingRate4": 5, "power": 20, "txActive": true, "rxActive": true }, "display": { "alwaysOn": true, "timeout": 4, "turn180": false }, "battery": { "sendInternalVoltage": false, "monitorInternalVoltage": false, "internalSleepVoltage": 2.9, "sendExternalVoltage": false, "externalVoltagePin": 34, "monitorExternalVoltage": false, "externalSleepVoltage": 10.9, "voltageDividerR1": 100.0, "voltageDividerR2": 27.0, "sendVoltageAsTelemetry": false }, "wxsensor": { "active": false, "heightCorrection": 0, "temperatureCorrection": 0.0 }, "syslog": { "active": false, "server": "192.168.0.100", "port": 514 }, "tnc": { "enableServer": false, "enableSerial": false, "acceptOwn": false }, "ota": { "username": "", "password": "" }, "webadmin": { "username": "admin", "password": "" }, "ntp": { "gmtCorrection": 0 }, "other": { "rememberStationTime": 30, "lowPowerMode": false, "lowVoltageCutOff": 0, "backupDigiMode": true, "rebootMode": true, "rebootModeTime": 12 }, "personalNote": "" }

richonguzman commented 2 days ago

Can you edit all through the WebConfig UI created for all of this?

uploading from VSCODE filesystem igate_conf.json may lead to missing a variable or editing errors.

symbol is selected over WebConfig UI without any problem. but if you need green star and still do it manually --> "symbol": "#",

at last, display should show DIGIREPEATEr without any problem, let me know if this is shown on yours

AG7U commented 1 day ago

Using VSCODE I erased flash and performed a full clean. Using WebConfig UI I configured TTGO-LoRa32 for digipeater WIDE1. I do not see the word DIGIREPEATER on the LoRa32 screen. Attached is the WebConfig UI configuration. What am I doing wrong? This digipeater will be going back to an environment with no WiFi, which is why I did not update WiFi Access or APRS-IS settings.

From: Ricardo Guzman (Richonguzman) @.> Sent: Saturday, November 30, 2024 5:14 PM To: richonguzman/LoRa_APRS_iGate @.> Cc: AG7U @.>; Author @.> Subject: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)

Can you edit all through the WebConfig UI created for all of this?

uploading from VSCODE filesystem igate_conf.json may lead to missing a variable or editing errors.

symbol is selected over WebConfig UI without any problem. but if you need green star and still do it manually --> "symbol": "#",

at last, display should show DIGIREPEATEr without any problem, let me know if this is shown on yours

- Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509487152, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3P5BGLBNHGQ2BR6ECMFJUL2DJIGHAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZGQ4DOMJVGI. You are receiving this because you authored the thread.Message ID: @.***>

richonguzman commented 1 day ago

but can you confirm its repeating? (besides the screen problem?)

De: AG7U @.> Enviado: domingo, 1 de diciembre de 2024 9:24 Para: richonguzman/LoRa_APRS_iGate @.> Cc: Ricardo Guzman (Richonguzman) @.>; Comment @.> Asunto: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)

Using VSCODE I erased flash and performed a full clean. Using WebConfig UI I configured TTGO-LoRa32 for digipeater WIDE1. I do not see the word DIGIREPEATER on the LoRa32 screen. Attached is the WebConfig UI configuration. What am I doing wrong? This digipeater will be going back to an environment with no WiFi, which is why I did not update WiFi Access or APRS-IS settings.

From: Ricardo Guzman (Richonguzman) @.> Sent: Saturday, November 30, 2024 5:14 PM To: richonguzman/LoRa_APRS_iGate @.> Cc: AG7U @.>; Author @.> Subject: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)

Can you edit all through the WebConfig UI created for all of this?

uploading from VSCODE filesystem igate_conf.json may lead to missing a variable or editing errors.

symbol is selected over WebConfig UI without any problem. but if you need green star and still do it manually --> "symbol": "#",

at last, display should show DIGIREPEATEr without any problem, let me know if this is shown on yours

- Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509487152, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3P5BGLBNHGQ2BR6ECMFJUL2DJIGHAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZGQ4DOMJVGI. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509743662, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQWBUGQ66AOCFUKDBUSTSML2DL5WVAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZG42DGNRWGI. You are receiving this because you commented.Message ID: @.***>

AG7U commented 1 day ago

Yes, I can confirm it is repeating.

Screenshot attached.

Two examples (raw from aprs.fi) proving WA0DE-T3 digipeated through AG7U-40, which was heard by two other iGates. 2024-12-01 11:20:41 MST: WA0DE-T3>APLRT1,AG7U-40,qAR,K8ZTT-40:!/:OZ74!$C<!!Q 2024-12-01 11:23:04 MST: WA0DE-T3>APLRT1,AG7U-40,qAO,N0KV-40:>https://github.com/richonguzman/LoRa_APRS_Tracker 2024.08.21

From: Ricardo Guzman (Richonguzman) @.> Sent: Sunday, December 1, 2024 5:56 AM To: richonguzman/LoRa_APRS_iGate @.> Cc: AG7U @.>; Author @.> Subject: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)

but can you confirm its repeating? (besides the screen problem?)

De: AG7U @.<mailto:@.>> Enviado: domingo, 1 de diciembre de 2024 9:24 Para: richonguzman/LoRa_APRS_iGate @.<mailto:@.>> Cc: Ricardo Guzman (Richonguzman) @.<mailto:@.>>; Comment @.<mailto:@.>> Asunto: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)

Using VSCODE I erased flash and performed a full clean. Using WebConfig UI I configured TTGO-LoRa32 for digipeater WIDE1. I do not see the word DIGIREPEATER on the LoRa32 screen. Attached is the WebConfig UI configuration. What am I doing wrong? This digipeater will be going back to an environment with no WiFi, which is why I did not update WiFi Access or APRS-IS settings.

From: Ricardo Guzman (Richonguzman) @.<mailto:@.>> Sent: Saturday, November 30, 2024 5:14 PM To: richonguzman/LoRa_APRS_iGate @.<mailto:@.>> Cc: AG7U @.<mailto:@.>>; Author @.<mailto:@.>> Subject: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)

Can you edit all through the WebConfig UI created for all of this?

uploading from VSCODE filesystem igate_conf.json may lead to missing a variable or editing errors.

symbol is selected over WebConfig UI without any problem. but if you need green star and still do it manually --> "symbol": "#",

at last, display should show DIGIREPEATEr without any problem, let me know if this is shown on yours

- Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509487152, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3P5BGLBNHGQ2BR6ECMFJUL2DJIGHAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZGQ4DOMJVGI. You are receiving this because you authored the thread.Message ID: @.<mailto:@.>>

- Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509743662, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQWBUGQ66AOCFUKDBUSTSML2DL5WVAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZG42DGNRWGI. You are receiving this because you commented.Message ID: @.<mailto:@.>>

- Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509755865, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3P5BGPA5E5BNE2LD6YJADL2DMBPRAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZG42TKOBWGU. You are receiving this because you authored the thread.Message ID: @.**@.>>