Closed HenningCederquist closed 2 years ago
Do you want to charge a car with 3 phases, but use different amps per phase? To my knowledge only supported use case is to have the same amps per phase if you are charging with 3 phases. I'm poor at the theory of electricity, but don't think you can run something at 3 phases with different amps per phase. However, there is no logic in the app to change the amps you select, what you enter is what is sent to the Easee cloud. If the amp values are changed this is something they are doing.
If you use one phase charging you can set two phases to 0 and the third to the desired amps to force the charger to select the phase you want to use.
Hi. I have tested the new app version 1.2.2 but still cannot get the dynamic current per phase. If I set the flow card to 8A, 6A, 8A the result will be 6A for all three phases. Is this flow card supposed to work?
Thanks! Henning