Support for ASRock Z270M-ITX/AC

[conf11s3d]

Hello sorry for the bad English would you be kind to provide a configuration for ASRock z270m-itx / ac unfortunately with my configuration I see several incorrect values like SYSTIN at 118 C in reality it should be my motherboard temperature which in the bios marks with much more values low and even the values of the tensions I do not think are correct. My current Debian 9 - lm-sensors version 3.4.0 configuration is attached to the sensors -u file. Thanks for your kind attention, greetings Stefan. sensors_u.txt

sensors -u

iwlwifi-virtual-0 Adapter: Virtual device temp1: temp1_input: 38.000

coretemp-isa-0000 Adapter: ISA adapter Package id 0: temp1_input: 34.000 temp1_max: 80.000 temp1_crit: 100.000 temp1_crit_alarm: 0.000 Core 0: temp2_input: 32.000 temp2_max: 80.000 temp2_crit: 100.000 temp2_crit_alarm: 0.000 Core 1: temp3_input: 33.000 temp3_max: 80.000 temp3_crit: 100.000 temp3_crit_alarm: 0.000

nct6793-isa-0290 Adapter: ISA adapter in0: in0_input: 0.344 in0_min: 0.000 in0_max: 1.744 in0_alarm: 0.000 in0_beep: 0.000 in1: in1_input: 1.840 in1_min: 0.000 in1_max: 0.000 in1_alarm: 1.000 in1_beep: 0.000 in2: in2_input: 3.472 in2_min: 0.000 in2_max: 0.000 in2_alarm: 1.000 in2_beep: 0.000 in3: in3_input: 3.344 in3_min: 0.000 in3_max: 0.000 in3_alarm: 1.000 in3_beep: 0.000 in4: in4_input: 0.248 in4_min: 0.000 in4_max: 0.000 in4_alarm: 1.000 in4_beep: 0.000 in5: in5_input: 0.128 in5_min: 0.000 in5_max: 0.000 in5_alarm: 1.000 in5_beep: 0.000 in6: in6_input: 0.864 in6_min: 0.000 in6_max: 0.000 in6_alarm: 1.000 in6_beep: 0.000 in7: in7_input: 3.456 in7_min: 0.000 in7_max: 0.000 in7_alarm: 1.000 in7_beep: 0.000 in8: in8_input: 3.168 in8_min: 0.000 in8_max: 0.000 in8_alarm: 1.000 in8_beep: 0.000 in9: in9_input: 1.040 in9_min: 0.000 in9_max: 0.000 in9_alarm: 1.000 in9_beep: 0.000 in10: in10_input: 0.152 in10_min: 0.000 in10_max: 0.000 in10_alarm: 1.000 in10_beep: 0.000 in11: in11_input: 0.128 in11_min: 0.000 in11_max: 0.000 in11_alarm: 1.000 in11_beep: 0.000 in12: in12_input: 1.840 in12_min: 0.000 in12_max: 0.000 in12_alarm: 1.000 in12_beep: 0.000 in13: in13_input: 1.680 in13_min: 0.000 in13_max: 0.000 in13_alarm: 1.000 in13_beep: 0.000 in14: in14_input: 0.184 in14_min: 0.000 in14_max: 0.000 in14_alarm: 1.000 in14_beep: 0.000 fan1: fan1_input: 818.000 fan1_min: 0.000 fan1_alarm: 0.000 fan1_beep: 0.000 fan1_pulses: 2.000 fan2: fan2_input: 1920.000 fan2_min: 0.000 fan2_alarm: 0.000 fan2_beep: 0.000 fan2_pulses: 2.000 fan3: fan3_input: 0.000 fan3_min: 0.000 fan3_alarm: 0.000 fan3_beep: 0.000 fan3_pulses: 2.000 fan4: fan4_input: 0.000 fan4_min: 0.000 fan4_alarm: 0.000 fan4_beep: 0.000 fan4_pulses: 2.000 fan5: fan5_input: 0.000 fan5_min: 0.000 fan5_alarm: 0.000 fan5_beep: 0.000 fan5_pulses: 2.000 SYSTIN: temp1_input: 118.000 temp1_max: 0.000 temp1_max_hyst: 0.000 temp1_type: 4.000 temp1_offset: 0.000 CPUTIN: temp2_input: 32.000 temp2_max: 80.000 temp2_max_hyst: 75.000 temp2_type: 4.000 temp2_offset: 0.000 AUXTIN0: temp3_input: 33.000 temp3_max: 0.000 temp3_max_hyst: 0.000 temp3_alarm: 1.000 temp3_type: 4.000 temp3_offset: 0.000 temp3_beep: 0.000 AUXTIN1: temp4_input: 110.000 temp4_type: 4.000 temp4_offset: 0.000 AUXTIN2: temp5_input: 110.000 temp5_type: 4.000 temp5_offset: 0.000 AUXTIN3: temp6_input: 109.000 temp6_type: 4.000 temp6_offset: 0.000 PECI Agent 0: temp7_input: 33.000 temp7_max: 80.000 temp7_max_hyst: 75.000 temp7_crit: 100.000 temp7_alarm: 0.000 temp7_beep: 0.000 PCH_CHIP_CPU_MAX_TEMP: temp8_input: 0.000 PCH_CHIP_TEMP: temp9_input: 0.000 PCH_CPU_TEMP: temp10_input: 0.000 intrusion0: intrusion0_alarm: 0.000 intrusion0_beep: 0.000 intrusion1: intrusion1_alarm: 1.000 intrusion1_beep: 0.000 beep_enable: beep_enable: 0.000

[rigred]

Can you please take a look here and submit the same additional information:

https://github.com/rigred/sensor_config/issues/7#issuecomment-475893049

[rigred]

In your case

modinfo nct6793
bios screenshots of the sensors

sudo find /sys/class/hwmon/hwmon[0-9]/ -type f -printf '%p, ' -exec cat {} \; > hwon_dump.csv