added Asus Prime X370 Pro

[Benzhaomin]

pretty basic config but it works for me

[rigred]

It's a bit too basic for inclusion in the repo. But we can work on improving that! :)

Options:

• Can you send me screenshots of your BIOS hardware info values.
• Dump of linux full sensors listing
  • At idle
  • While running a CPU load like mprime -t ( If overclocked, Please make sure your CPU is stable before doing this) and let me know what voltages you're pumping.

If you have a windows dual boot setup

• Install and run HWInfo64
• Save a CSV log while idle and under load and submit it.

With those pieces of info in hand I'm sure we can craft a dependable accurate config for your board.

[Benzhaomin]

I updated the config file to cover pretty much every sensor we can exploit, based on:

• bios settings and labels
• HWInfo64
• X470 Crosshair VII config

Here is what I get on my watercooled 2700X with 1.35 Vcore and 1.0125 Vsoc set in the bios.

it8665-isa-0290
Adapter: ISA adapter
VDDCR CPU (Vcore):  +1.34 V  (min =  +2.10 V, max =  +0.42 V)
Vccp2 / VPP_MEM:    +2.50 V  (min =  +1.67 V, max =  +0.72 V)
+12V:              +11.90 V  (min =  +6.54 V, max =  +8.24 V)
+5V:                +4.99 V  (min =  +6.62 V, max =  +2.04 V)
+3.3V:              +3.27 V  (min =  +2.70 V, max =  +1.92 V)
VBat:               +3.16 V
AVCC3:              +3.29 V
CPU Fan:            376 RPM  (min =   17 RPM)
CPU Opt Fan:          0 RPM  (min =   14 RPM)  ALARM
Chassis Fan 1:        0 RPM  (min =   19 RPM)  ALARM
AIO Pump:             0 RPM  (min =   -1 RPM)  ALARM
Water Pump:        2678 RPM  (min =   -1 RPM)  ALARM
CPU Temp:           +42.0°C  (low  = +49.0°C, high = +95.0°C)
Motherboard Temp:   +40.0°C  (low  = +83.0°C, high = -126.0°C)  sensor = thermistor
Temp 3:             +33.0°C  (low  = +63.0°C, high = +77.0°C)  sensor = thermistor

[rigred]

About as good as it gets for now. Merged! 👍

[rigred]

And thank you a lot for going to the effort of contributing. I always appreciate that no matter how big/small.