search

riptidewave93 / LEDE-APU2

Unofficial PC Engines APU2 Board LEDE repo
GNU General Public License v2.0
17 stars 7 forks source link

compiled trunk today with the lede upstream branch - gpio problems. #7

Closed CRCinAU closed 8 years ago

CRCinAU commented 8 years ago

From the dmesg:

# dmesg | grep -i gpio
[    0.491161] gpio-nct5104d: Found nct5104d at 0x2e chip id 0xc452
[    0.497213] gpio-nct5104d: platform_driver_register
[    0.502273] gpio-nct5104d: Device added
[    2.521868] gpio-apu2: load APU2/LED GPIO driver module
[    2.527172] gpio-apu2: APU2 board not detected! Found: (null) (null)
[    2.533552] gpio-apu2: probe of gpio-apu2 failed with error -13
[    2.539521] gpio-apu2: APU2 GPIO/LED driver module loaded
[    2.715797] gpio-keys-polled gpio-keys-polled: unable to claim gpio 508, err=-517
[    2.924091] gpio-keys-polled gpio-keys-polled: unable to claim gpio 508, err=-517
[    6.918815] gpio-keys-polled gpio-keys-polled: unable to claim gpio 508, err=-517
[    6.986705] gpio-keys-polled gpio-keys-polled: unable to claim gpio 508, err=-517
[    7.056219] gpio-keys-polled gpio-keys-polled: unable to claim gpio 508, err=-517
[    7.089135] gpio-keys-polled gpio-keys-polled: unable to claim gpio 508, err=-517

For testing, nightly images can be found at: http://openwrt.crc.id.au/

This test is on r1967.

CRCinAU commented 8 years ago

Seems like this was reported here, but marked as fixed: https://github.com/riptidewave93/LEDE-APU2/issues/2#issuecomment-254853747

As per that report, I see:

root@lede:~# cat /sys/devices/virtual/dmi/id/sys_vendor
PC Engines
root@lede:~# cat /sys/devices/virtual/dmi/id/board_vendor
PC Engines
root@lede:~# cat /sys/devices/virtual/dmi/id/product_name
apu2
root@lede:~# cat /sys/devices/virtual/dmi/id/board_name
apu2
root@lede:~#
CRCinAU commented 8 years ago

I just realised - I may have messed up here - I might have been on the master branch - and not the lede-for-upstream branch when I did the build... I'm rebuilding everything from scratch - that URL should be valid again in the near future with updated images.

CRCinAU commented 8 years ago

Yep - ignore me - wrong branch :)

Below is the dmesg from a corrected r1967 build. And with that, closing this report as user error :)

[    0.000000] Linux version 4.4.27 (openwrt@openwrt.vm) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1967) ) #0 SMP Mon Oct 24 20:52:44 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=3810ace3-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] tseg: 0000000000
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffadfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffae000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: PC Engines apu2/apu2, BIOS 88a4f96 03/07/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 base 00C0000000 mask FFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 00FF800000 mask FFFF800000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000011f000000 aka 4592M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xdffae max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f2f30-0x000f2f3f] mapped at [ffff8800000f2f30]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x017a7000, 0x017a7fff] PGTABLE
[    0.000000] BRK [0x017a8000, 0x017a8fff] PGTABLE
[    0.000000] BRK [0x017a9000, 0x017a9fff] PGTABLE
[    0.000000] BRK [0x017aa000, 0x017aafff] PGTABLE
[    0.000000] BRK [0x017ab000, 0x017abfff] PGTABLE
[    0.000000] BRK [0x017ac000, 0x017acfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F30E0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB80E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB96F0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB8250 001496 (v02 AMD    COREBOOT 00010001 INTL 20140114)
[    0.000000] ACPI: FACS 0x00000000DFFB8210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB97F0 000045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB9840 00007E (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 0x00000000DFFB98C0 0001D0 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0x00000000DFFB9A90 0048A6 (v02 AMD    AGESA    00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DFFBE340 0007C8 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.000000] ACPI: HPET 0x00000000DFFBEB10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dffadfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[    0.000000] On node 0 totalpages: 1044300
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14271 pages used for memmap
[    0.000000]   DMA32 zone: 913326 pages, LIFO batch:31
[    0.000000]   Normal zone: 1984 pages used for memmap
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x818
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88011ec00000 s84888 r8192 d29800 u524288
[    0.000000] pcpu-alloc: s84888 r8192 d29800 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1027960
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=3810ace3-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4030984K/4177200K available (4442K kernel code, 417K rwdata, 1608K rodata, 828K init, 504K bss, 146216K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:1000 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 998.067 MHz processor
[    0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.13 BogoMIPS (lpj=9980670)
[    0.010710] pid_max: default: 32768 minimum: 301
[    0.015385] ACPI: Core revision 20150930
[    0.035041] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.041606] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.048328] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.056123] CPU: Physical Processor ID: 0
[    0.060179] CPU: Processor Core ID: 0
[    0.063865] mce: CPU supports 6 MCE banks
[    0.067935] LVT offset 1 assigned for vector 0xf9
[    0.072667] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.078177] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.084939] Freeing SMP alternatives memory: 20K (ffffffff81723000 - ffffffff81728000)
[    0.097540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.320701] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
[    0.328754] Performance Events: AMD PMU driver.
[    0.333358] ... version:                0
[    0.337397] ... bit width:              48
[    0.341508] ... generic registers:      4
[    0.345544] ... value mask:             0000ffffffffffff
[    0.350884] ... max period:             00007fffffffffff
[    0.356203] ... fixed-purpose events:   0
[    0.360226] ... event mask:             000000000000000f
[    0.366360] x86: Booting SMP configuration:
[    0.370560] .... node  #0, CPUs:      #1 #2 #3
[    0.383342] x86: Booted up 1 node, 4 CPUs
[    0.387609] smpboot: Total of 4 processors activated (7984.53 BogoMIPS)
[    0.396580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.407196] NET: Registered protocol family 16
[    0.440732] cpuidle: using governor ladder
[    0.445083] ACPI: bus type PCI registered
[    0.449118] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.455732] PCI: Using configuration type 1 for base access
[    0.461343] PCI: Using configuration type 1 for extended access
[    0.501354] gpio-nct5104d: Found nct5104d at 0x2e chip id 0xc452
[    0.507406] gpio-nct5104d: platform_driver_register
[    0.512507] gpio-nct5104d: Device added
[    0.516430] ACPI: Added _OSI(Module Device)
[    0.520655] ACPI: Added _OSI(Processor Device)
[    0.525164] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.529902] ACPI: Added _OSI(Processor Aggregator Device)
[    0.539524] ACPI: Executed 1 blocks of module-level executable AML code
[    0.557761] ACPI: Interpreter enabled
[    0.561474] ACPI: (supports S0 S5)
[    0.564906] ACPI: Using IOAPIC for interrupt routing
[    0.569952] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.586918] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.593138] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[    0.600308] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.610232] acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0x0cf7 window]; [io  0x03b0-0x03df window] ignored
[    0.621623] PCI host bridge to bus 0000:00
[    0.625781] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.632609] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.639410] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.646333] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.653245] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.660148] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.665710] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[    0.666028] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[    0.666325] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[    0.666524] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.666809] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[    0.666976] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    0.667199] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[    0.667366] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.667567] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[    0.667634] pci 0000:00:08.0: reg 0x10: [mem 0xfeb00000-0xfeb1ffff 64bit pref]
[    0.667649] pci 0000:00:08.0: reg 0x18: [mem 0xfe900000-0xfe9fffff]
[    0.667690] pci 0000:00:08.0: reg 0x1c: [mem 0xfeb24000-0xfeb24fff]
[    0.667703] pci 0000:00:08.0: reg 0x20: [mem 0xfea00000-0xfeafffff]
[    0.667716] pci 0000:00:08.0: reg 0x24: [mem 0xfeb20000-0xfeb21fff]
[    0.668007] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.668063] pci 0000:00:10.0: reg 0x10: [mem 0xfeb22000-0xfeb23fff 64bit]
[    0.668205] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.668373] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
[    0.668438] pci 0000:00:11.0: reg 0x10: [io  0x4010-0x4017]
[    0.668454] pci 0000:00:11.0: reg 0x14: [io  0x4020-0x4023]
[    0.668469] pci 0000:00:11.0: reg 0x18: [io  0x4018-0x401f]
[    0.668486] pci 0000:00:11.0: reg 0x1c: [io  0x4024-0x4027]
[    0.668528] pci 0000:00:11.0: reg 0x20: [io  0x4000-0x400f]
[    0.668544] pci 0000:00:11.0: reg 0x24: [mem 0xfeb25000-0xfeb253ff]
[    0.668580] pci 0000:00:11.0: set SATA to AHCI mode
[    0.673556] pci 0000:00:11.0: PME# supported from D3hot
[    0.673806] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[    0.673844] pci 0000:00:13.0: reg 0x10: [mem 0xfeb25400-0xfeb254ff]
[    0.673967] pci 0000:00:13.0: supports D1 D2
[    0.673975] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.674190] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.674456] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.674757] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[    0.674789] pci 0000:00:14.7: reg 0x10: [mem 0xfeb25500-0xfeb255ff 64bit]
[    0.675147] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[    0.675390] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[    0.675566] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[    0.675746] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[    0.675992] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[    0.676200] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[    0.676635] pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
[    0.676742] pci 0000:01:00.0: reg 0x10: [mem 0xfe600000-0xfe61ffff]
[    0.676793] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
[    0.676842] pci 0000:01:00.0: reg 0x1c: [mem 0xfe620000-0xfe623fff]
[    0.677010] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.677139] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.682161] pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
[    0.682171] pci 0000:00:02.2:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.682347] pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
[    0.682469] pci 0000:02:00.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
[    0.682507] pci 0000:02:00.0: reg 0x18: [io  0x2000-0x201f]
[    0.682555] pci 0000:02:00.0: reg 0x1c: [mem 0xfe720000-0xfe723fff]
[    0.682724] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.682857] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.687871] pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
[    0.687880] pci 0000:00:02.3:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.688071] pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
[    0.688173] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe81ffff]
[    0.688237] pci 0000:03:00.0: reg 0x18: [io  0x3000-0x301f]
[    0.688259] pci 0000:03:00.0: reg 0x1c: [mem 0xfe820000-0xfe823fff]
[    0.688425] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.688554] pci 0000:00:02.4: PCI bridge to [bus 03]
[    0.693548] pci 0000:00:02.4:   bridge window [io  0x3000-0x3fff]
[    0.693584] pci 0000:00:02.4:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.693625] pci_bus 0000:00: on NUMA node 0
[    0.694232] ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12 15)
[    0.701111] ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12 15)
[    0.707989] ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12 15)
[    0.714951] ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12 15)
[    0.721854] ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12 15)
[    0.728831] ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12 15)
[    0.735755] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.741035] SCSI subsystem initialized
[    0.744968] libata version 3.00 loaded.
[    0.744986] ACPI: bus type USB registered
[    0.749084] usbcore: registered new interface driver usbfs
[    0.754640] usbcore: registered new interface driver hub
[    0.760000] usbcore: registered new device driver usb
[    0.765337] PCI: Using ACPI for IRQ routing
[    0.769543] PCI: pci_cache_line_size set to 64 bytes
[    0.769649] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.769655] e820: reserve RAM buffer [mem 0xdffae000-0xdfffffff]
[    0.769660] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[    0.770316] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.775349] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.783360] clocksource: Switched to clocksource hpet
[    0.788850] pnp: PnP ACPI init
[    0.792382] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[    0.799051] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.799127] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.799262] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.799610] pnp: PnP ACPI: found 3 devices
[    0.811533] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.820491] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.825516] pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
[    0.831641] pci 0000:00:02.2:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.838486] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.843508] pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
[    0.849617] pci 0000:00:02.3:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.856457] pci 0000:00:02.4: PCI bridge to [bus 03]
[    0.861441] pci 0000:00:02.4:   bridge window [io  0x3000-0x3fff]
[    0.867585] pci 0000:00:02.4:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.874406] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.874414] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.874422] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.874457] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.874463] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[    0.874470] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.874477] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.874483] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.874490] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.874496] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.874502] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.874643] NET: Registered protocol family 2
[    0.879541] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.887034] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.893991] TCP: Hash tables configured (established 32768 bind 32768)
[    0.900648] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.906729] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.913448] NET: Registered protocol family 1
[    0.918804] PCI: CLS 64 bytes, default 64
[    0.919082] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.925582] software IO TLB [mem 0xdbfae000-0xdffae000] (64MB) mapped at [ffff8800dbfae000-ffff8800dffadfff]
[    0.935662] perf: AMD NB counters detected
[    0.939803] perf: AMD L2I counters detected
[    0.944123] LVT offset 0 assigned for vector 0x400
[    0.948975] perf: AMD IBS detected (0x000000ff)
[    0.954234] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.960926] Crashlog allocated RAM at address 0x1000
[    0.971944] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.979001] io scheduler noop registered
[    0.982970] io scheduler deadline registered (default)
[    0.989210] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.995129] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.003510] ACPI: Power Button [PWRB]
[    1.007361] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.014835] ACPI: Power Button [PWRF]
[    1.018681] ACPI: acpi_idle registered with cpuidle
[    1.020031] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.047409] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.075805] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.084067] Non-volatile memory driver v1.3
[    1.092672] loop: module loaded
[    1.095999] Guest personality initialized and is inactive
[    1.101475] VMCI host device registered (name=vmci, major=10, minor=63)
[    1.108149] Initialized host personality
[    1.112271] VMware PVSCSI driver - version 1.0.5.0-k
[    1.117406] ahci 0000:00:11.0: version 3.0
[    1.117802] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.125928] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[    1.135338] scsi host0: ahci
[    1.138528] scsi host1: ahci
[    1.141532] ata1: SATA max UDMA/133 abar m1024@0xfeb25000 port 0xfeb25100 irq 19
[    1.148989] ata2: SATA max UDMA/133 abar m1024@0xfeb25000 port 0xfeb25180 irq 19
[    1.156759] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
[    1.163335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.169912] ehci-pci: EHCI PCI platform driver
[    1.174644] ehci-pci 0000:00:13.0: EHCI Host Controller
[    1.179926] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[    1.187381] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.196166] ehci-pci 0000:00:13.0: debug port 2
[    1.200797] ehci-pci 0000:00:13.0: irq 18, io mem 0xfeb25400
[    1.223407] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[    1.229644] hub 1-0:1.0: USB hub found
[    1.233440] hub 1-0:1.0: 2 ports detected
[    1.237655] ehci-platform: EHCI generic platform driver
[    1.242943] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.249158] ohci-pci: OHCI PCI platform driver
[    1.253655] ohci-platform: OHCI generic platform driver
[    1.258917] uhci_hcd: USB Universal Host Controller Interface driver
[    1.265545] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.270793] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.278462] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[    1.287571] hub 2-0:1.0: USB hub found
[    1.291350] hub 2-0:1.0: 2 ports detected
[    1.295642] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.300902] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    1.308394] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.316807] hub 3-0:1.0: USB hub found
[    1.320612] hub 3-0:1.0: 2 ports detected
[    1.324944] usbcore: registered new interface driver usb-storage
[    1.331047] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.493418] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.499675] ata2: SATA link down (SStatus 0 SControl 300)
[    1.506740] ata1.00: ATA-9: KingFast, O1229A, max UDMA/133
[    1.512271] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.527104] ata1.00: configured for UDMA/133
[    1.531706] scsi 0:0:0:0: Direct-Access     ATA      KingFast         9A   PQ: 0 ANSI: 5
[    1.540354] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.548205] sd 0:0:0:0: [sda] Write Protect is off
[    1.553016] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.553127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.562962]  sda: sda1 sda2
[    1.566475] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.953440] tsc: Refined TSC clocksource calibration: 998.128 MHz
[    1.959549] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65d64e77, max_idle_ns: 881590512558 ns
[    2.410851] i8042: No controller found
[    2.414745] rtc_cmos 00:01: RTC can wake from S4
[    2.419669] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.425856] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[    2.432935] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    2.439418] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x42
[    2.447155] sp5100_tco: Using 0xfeb00000 for watchdog MMIO address
[    2.453385] sp5100_tco: Last reboot was not triggered by watchdog.
[    2.459701] sp5100_tco: initialized (0xffffc90000034000). heartbeat=60 sec (nowayout=0)
[    2.467797] sdhci: Secure Digital Host Controller Interface driver
[    2.473995] sdhci: Copyright(c) Pierre Ossman
[    2.478399] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[    2.485867] sdhci-pci 0000:00:14.7: No vmmc regulator found
[    2.491468] sdhci-pci 0000:00:14.7: No vqmmc regulator found
[    2.498444] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[    2.505439] leds-apu2: load APU2/LED GPIO driver module
[    2.510739] leds-apu2: PCI Revision ID: 0x42
[    2.515163] leds-apu2: APU2 GPIO/LED driver module loaded
[    2.521580] NET: Registered protocol family 10
[    2.526747] NET: Registered protocol family 17
[    2.531231] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.543890] 8021q: 802.1Q VLAN Support v1.8
[    2.548160] NET: Registered protocol family 40
[    2.553296] AVX version of gcm_enc/dec engaged.
[    2.557850] AES CTR mode by8 optimization enabled
[    2.564871] rtc_cmos 00:01: setting system clock to 2016-10-25 14:58:56 UTC (1477407536)
[    2.573274] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.583252] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[    2.590368] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    2.600117] Freeing unused kernel memory: 828K (ffffffff81654000 - ffffffff81723000)
[    2.629053] init: Console is alive
[    2.632623] init: - watchdog -
[    2.668262] pps_core: LinuxPPS API ver. 1 registered
[    2.673272] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.683165] PTP clock support registered
[    2.687730] Button Hotplug driver version 0.4.1
[    2.696601] init: - preinit -
[    2.723524] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.753160] random: jshn: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
[    2.779349] random: jshn: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
[    2.800781] random: jshn: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
[    2.826298] random: jshn: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
[    2.846805] random: jshn: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
[    2.894898] random: procd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
[    2.905541] hub 1-1:1.0: USB hub found
[    2.912887] hub 1-1:1.0: 4 ports detected
[    2.963647] clocksource: Switched to clocksource tsc
[    5.914263] mount_root: mounting /dev/root
[    5.919796] EXT4-fs (sda2): re-mounted. Opts: (null)
[    5.952077] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    6.010152] urandom-seed: Seed file not found (/etc/urandom.seed)
[    6.025851] procd: - early -
[    6.028817] procd: - watchdog -
[    6.619528] procd: - ubus -
[    6.626396] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[    6.672712] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[    6.681906] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[    6.690970] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[    6.700574] procd: - init -
[    6.763245] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    6.770302] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.808220] pps pps0: new PPS source ptp0
[    6.812282] igb 0000:01:00.0: added PHC on eth0
[    6.816888] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[    6.823809] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:59:a4
[    6.830974] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[    6.836147] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    6.875586] pps pps1: new PPS source ptp1
[    6.879643] igb 0000:02:00.0: added PHC on eth1
[    6.884245] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[    6.891169] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:59:a5
[    6.898360] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
[    6.903523] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    6.942765] pps pps2: new PPS source ptp2
[    6.946844] igb 0000:03:00.0: added PHC on eth2
[    6.951410] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[    6.958382] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:59:a6
[    6.965560] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
[    6.970731] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    6.980662] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.990030] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    6.998635] i2c /dev entries driver
[    7.003461] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[    7.011474] Backport generated by backports.git backports-20160324-9-g0e38f5c
[    7.048848] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.058532] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    7.197438] usbcore: registered new interface driver usbserial
[    7.203562] usbcore: registered new interface driver usbserial_generic
[    7.210380] usbserial: USB Serial support registered for generic
[    7.221675] xt_time: kernel timezone is -0000
[    7.231997] PPP generic driver version 2.4.2
[    7.237034] NET: Registered protocol family 24
[    9.613606] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.619653] 8021q: adding VLAN 0 to HW filter on device eth0
[    9.677983] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    9.684069] 8021q: adding VLAN 0 to HW filter on device eth2
[   12.434992] igb 0000:03:00.0 eth2: igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   12.444419] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   41.697172] random: nonblocking pool is initialized