Closed ASADAIDAR closed 1 year ago
Unfortunately I don't have time for this. Sory.
It would be very cool if you described the methods (when you have time) how to independently assemble the firmware for this board. Thanks!
Everything you will need has been made, why not consider doing it with a few cables. The easiest way is to combine a PCB with a board.
I assembled a budget flight controller for a flying wing according to the instructions (3 outputs: 2 servos and 1 motor), but for convenience I need to remap the outputs S1 to pin B3; S2 to pin A8; S3 to pin B4;S6 to pin B10. Could you compile a new firmware with these outputs?I made handy pins (pictured) to connect the servos and motors, so I need to remap the outputs.