Open GoogleCodeExporter opened 8 years ago
Add:
the same issue with earlier versions, but less choppy video
Original comment by piRoman9...@gmail.com
on 13 Jun 2012 at 2:57
Yep, i really don't know how to solve that one :/
Two little clues:
- Video is less choppy with MPlayer
- You can try to increase the buffer size in vlc with --network-caching=<size in ms>, default buffer is 1000ms long.
Original comment by FyHertz
on 14 Jun 2012 at 6:04
I ran into the same problem and spent some time in wireshark to figure out what
was wrong.
#1 The measured time between frames was very inconsistent. Example debugging
below. Since this value was used for the rtp timestamp value, vlc displays the
frames at time intervals that make it look very choppy.
D/H263Packetizer(25949): End of frame ! duration: 983
D/H263Packetizer(25949): End of frame ! duration: 1
D/H263Packetizer(25949): End of frame ! duration: 7
D/H263Packetizer(25949): End of frame ! duration: 6
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 2
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 0
D/H263Packetizer(25949): End of frame ! duration: 1
D/H263Packetizer(25949): End of frame ! duration: 932
#2 After a minute of running or so, vlc would not continue to play the stream
and it would output this error.
avcodec decoder error: more than 5 seconds of late video -> dropping frame
(computer too slow ?)
I made changes to the H263Packetizer run function to make the frame timing more
consistent so that it appears to run smoothly. I'm not sure if this will work
for everyone but it worked for me in fixing both the problems above. See
attached.
Original comment by Joben...@gmail.com
on 16 May 2013 at 8:13
Attachments:
Dude, you are using a terribly old version of spydroid, this issue has been
fixed a long time ago !
Original comment by FyHertz
on 17 May 2013 at 1:04
lol, you are correct sir
Original comment by Joben...@gmail.com
on 24 May 2013 at 2:11
Original issue reported on code.google.com by
piRoman9...@gmail.com
on 13 Jun 2012 at 2:43