Open cosmo88 opened 8 years ago
cosmo88
commented
8 years ago I was able to figure this out! It is working very well with my Smartthings hub v2. Another question. Is there any way to setup this up so that the smartthing hb can see what the status is of each switch. Also, it it possible to add insteon scenes as switches? Right now I'm using a switch to activate a scene, but it would be awesome if I could just trigger the scene.
adorsett
commented
7 years ago How did you solve the issue? I'm having the same one. Thanks!
Correction, I figured out how to enable UPNP on the ISY but I still have 0 devices found on step 2.
adorsett
commented
7 years ago I will reply to my own post now and provide what I did to fix it.
First go into ISY->Configuration->System->Network Settings and check UPNP.
Then go to Step 2 and leave it refreshing while you reboot the ISY via the Admin Console.
Also make sure you are running the latest version. I'm not sure if it made a difference but I did upgrade to the latest (4.5.4) before it rebooted and showed up in Step 2.
terwilliker
commented
7 years ago this is not working even with UPNP on. the log shows the device but it doesn't show up in the dialog box so you can't select it.
8d3fb66c-5d2c-401c-8b82-9da3b6373090 8:29:56 AM: debug There are 0 devices at this time 8d3fb66c-5d2c-401c-8b82-9da3b6373090 8:29:56 AM: debug Received Response: devicetype:04, mac:0021B9021896, networkAddress:C0A8010B, deviceAddress:0000, stringCount:03, ssdpPath:/desc, ssdpUSN:uuid:00:21:b9:02:18:96::urn:udi-com:device:X_Insteon_Lighting_Device:1, ssdpTerm:urn:udi-com:device:X_Insteon_Lighting_Device:1 8d3fb66c-5d2c-401c-8b82-9da3b6373090 8:29:56 AM: debug There are 0 devices at this time 8d3fb66c-5d2c-401c-8b82-9da3b6373090 8:29:56 AM: debug Performing discovery 8d3fb66c-5d2c-401c-8b82-9da3b6373090 8:29:56 AM: debug Subscribing to updates
gemarsh
commented
6 years ago It's behaving the same way for me as well: 45eb9690-92a8-4d61-8816-5efff8eba6f8 4:42:12 PM: debug There are 0 devices at this time 45eb9690-92a8-4d61-8816-5efff8eba6f8 4:42:12 PM: debug Performing discovery 45eb9690-92a8-4d61-8816-5efff8eba6f8 4:42:06 PM: debug There are 0 devices at this time 45eb9690-92a8-4d61-8816-5efff8eba6f8 4:42:06 PM: debug Performing discovery 45eb9690-92a8-4d61-8816-5efff8eba6f8 4:42:01 PM: debug There are 0 devices at this time 45eb9690-92a8-4d61-8816-5efff8eba6f8 4:42:01 PM: debug Performing discovery 45eb9690-92a8-4d61-8816-5efff8eba6f8 4:42:01 PM: debug Subscribing to updates
Hey Rllynch!
Thanks for all the support. I bought a isy994i to replace my isy991 specifically to use this solution to have a smartthings door open sensor to control my insteon lighting system. However I have never been able to find the ISY in step 2. Is there something I'm missing. I installed the apps in "My Smart Apps" by coping the code from github and have also added both the dimmer and switch as device in the "My Device Handlers" Section. Can't get the ISY to pop up. Any advice?