Installation on Raspberry Pi OS Lite (bullseye) aborts with an error

arevi9176 commented 2 years ago

First of all thanks for all your effort! Your work is greatly appreciated!

I've been using the luma.led_matrix package for quite a while without any issues on an RPI 3B with Raspberry Pi OS Lite (buster). Now I tried the latest Raspberry Pi OS Lite (bullseye) release (same hardware, setup from scratch). Unfortunately the installation of luma.led_matrix package aborts with an error. Seems there is a problem with ws2812.

Any ideas?

Type of Raspberry Pi

Raspberry Pi 3 Model B V1.2

Linux Kernel version

Linux 5.10.63-v7+ #1459 SMP Wed Oct 6 16:41:10 BST 2021 armv7l GNU/Linux Raspbian GNU/Linux 11 (bullseye)

Python 3.9.2

Expected behaviour

successful installation with

sudo python3 -m pip install --upgrade luma.led_matrix

Actual behaviour

sudo usermod -a -G spi,gpio pi sudo apt install build-essential python3-dev python3-pip libfreetype6-dev libjpeg-dev libopenjp2-7 libtiff5 sudo -H pip install --upgrade --ignore-installed pip setuptools

runs without error, but ...

sudo python3 -m pip install --upgrade luma.led_matrix

gives

ERROR: Failed building wheel for ws2812

see details here: https://pastebin.com/raw/TRquDVmd

thijstriemstra commented 2 years ago

Remove the ws2812 library from setup.cfg (download tarball or do git checkout of source) and running pip install -e . should workaround the issue.

michaelWuensch commented 2 years ago

I am having the exact same issue. What does "hack" mean? Is something not going to work?

thijstriemstra commented 2 years ago

apparently that ws2812 package is broken, and not even directly used by luma.led_matrix, so use instructions i gave to skip installation of that 3rd party package.

michaelWuensch commented 2 years ago

Ah ok, I just use the MAX7219 so that should work. I removed it, ran sudo python3 setup.py install and it installed without an error. Thanks!

arevi9176 commented 2 years ago

Thx for the quick response - works for me too!

I installed into a venv wich first aborted due to some problems with setting up RPi.GPIO into that venv. Perhaps also related to bullseye.

Workaround for me was export CFLAGS=-fcommon pip install RPi.GPIO

Maybe someone finds this useful.

thijstriemstra commented 2 years ago

due to some problems with setting up RPi.GPIO

I also encountered the issue with RPi.GPIO failing on Python 3.9 with bullseye. I used a pre-release version of RPi.GPIO instead:

pip install RPi.GPIO==0.7.1a4

arevi9176 commented 2 years ago

confirmed - v0.7.1a4 runs without error ...

J0eK1ng commented 2 years ago

it's a hack but removing that library from setup.cfg (download tarball or do git checkout of source) and running pip install -e . should workaround the issue.

I'm also having the same issue with "bullseye". Can you please tell me what lines I should remove from the setup.cfg. Thanks

thijstriemstra commented 2 years ago

Get rid of the ws2812; platform_machine=="armv7l" and platform_system=="Linux" line in the install_requires section of setup.cfg

Raspipython commented 2 years ago

Sorry, but i created an extra issue for this toppic, because i havnt Seen this issue. Im new at the raspberry pi and github, but i have the same error. I dont know how to remove the ws2812 library. @thijstriemstra described it, but i dont know,how to download the tarball. I hope, anyone can help me. Sorry for my Bad english😅

thijstriemstra commented 2 years ago

Download source: https://github.com/rm-hull/luma.led_matrix/archive/refs/heads/master.zip
Unzip it
cd luma.led_matrix-master/
~~Open setup.cfg and remove ws2812; platform_machine=="armv7l" and platform_system=="Linux" line in that file~~ fixed in master branch now
pip3 install -e . (or sudo pip3 install -e .)

Raspipython commented 2 years ago

I did this , and now my raspberry pi says: Usage:
pip install [options] [package-index-options] ... pip install [options] -r [package-index-options] ... pip install [options] [-e] ... pip install [options] [-e] ... pip install [options] <archive url/path> ...

-e option requires 1 argument what to do next ?

thijstriemstra commented 2 years ago

you forgot the . at the end. Command is:

pip3 install -e .

Raspipython commented 2 years ago

now this appears: Defaulting to user installation because normal site-packages is not writeable Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Obtaining file:///home/pi ERROR: file:///home/pi does not appear to be a Python project: neither 'setup.py' nor 'pyproject.toml' found.

thijstriemstra commented 2 years ago

Try sudo pip3 install -e . or pip3 install -e ., Python 2 is not supported.

Raspipython commented 2 years ago

Now the same error appears again: Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Obtaining file:///home/pi ERROR: file:///home/pi does not appear to be a Python project: neither 'setup.py' nor 'pyproject.toml' found.

thijstriemstra commented 2 years ago

Please copy/paste all steps you performed and it's output and paste it on http://www.pastebin.com and link it here.

Raspipython commented 2 years ago

Here: https://pastebin.com/Z9KBq8rS

thijstriemstra commented 2 years ago

you wrote:

first i unpacked the zip at pi. then i typed this:

but you forgot to:

cd luma.led_matrix-master/

Raspipython commented 2 years ago

oh sorry i didnt noticed cd. now it works! Thanks a lot!

thijstriemstra commented 2 years ago

So the ws2812 package's last release was on Oct 7, 2014: https://pypi.org/project/ws2812/

It's homepage is listed as (a redirect to) https://github.com/pimoroni/unicorn-hat

The documentation there calls it the unicornhat package:

sudo pip3 install unicornhat

but also mentions it requires the rpi_ws281x library:

Note this library requires the rpi_ws281x Python library which you can find here: https://github.com/pimoroni/rpi_ws281x-python

luma.led_matrix currently requires the following libraries:

install_requires =
    luma.core>=2.2.0
    ws2812; platform_machine=="armv7l" and platform_system=="Linux"
    rpi_ws281x; platform_machine=="armv7l" and platform_system=="Linux"

I can only find an import refererencing the rpi_ws281x library in the source code:

    def __ws281x__(self):
        import _rpi_ws281x
        return _rpi_ws281x

I also did a search for unicornhat imports in luma.led_matrix but couldn't find any.

This all leads me to believe that the ws2812 library is not needed (fortunately). I created #264 that removes the dependency.

linuxminty commented 2 years ago

I removed ws2812from the setup.cfg file in the luma.led_matrix directory on my Raspberry Pi and then ran pip install -e . This resulted in the following output:

pi@raspberrypi-4B:~/luma.led_matrix $ pip install -e .
Defaulting to user installation because normal site-packages is not writeable
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Obtaining file:///home/pi/luma.led_matrix
  Installing build dependencies ... done
  Checking if build backend supports build_editable ... done
  Getting requirements to build wheel ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmp96j6zc13
       cwd: /home/pi/luma.led_matrix
  Complete output (51 lines):
  Traceback (most recent call last):
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/_vendor/packaging/requirements.py", line 102, in __init__
      req = REQUIREMENT.parseString(requirement_string)
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/_vendor/pyparsing.py", line 1654, in parseString
      raise exc
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/_vendor/pyparsing.py", line 1644, in parseString
      loc, tokens = self._parse( instring, 0 )
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/_vendor/pyparsing.py", line 1402, in _parseNoCache
      loc,tokens = self.parseImpl( instring, preloc, doActions )
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/_vendor/pyparsing.py", line 3417, in parseImpl
      loc, exprtokens = e._parse( instring, loc, doActions )
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/_vendor/pyparsing.py", line 1406, in _parseNoCache
      loc,tokens = self.parseImpl( instring, preloc, doActions )
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/_vendor/pyparsing.py", line 3205, in parseImpl
      raise ParseException(instring, loc, self.errmsg, self)
  pkg_resources._vendor.pyparsing.ParseException: Expected stringEnd (at char 27), (line:1, col:28)

  During handling of the above exception, another exception occurred:

  Traceback (most recent call last):
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in <module>
      main()
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
      json_out['return_val'] = hook(**hook_input['kwargs'])
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 130, in get_requires_for_build_wheel
      return hook(config_settings)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 162, in get_requires_for_build_wheel
      return self._get_build_requires(
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 143, in _get_build_requires
      self.run_setup()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 158, in run_setup
      exec(compile(code, __file__, 'exec'), locals())
    File "setup.py", line 7, in <module>
      setuptools.setup()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/__init__.py", line 152, in setup
      _install_setup_requires(attrs)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/__init__.py", line 145, in _install_setup_requires
      dist.parse_config_files(ignore_option_errors=True)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/dist.py", line 801, in parse_config_files
      self._finalize_requires()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/dist.py", line 528, in _finalize_requires
      self._move_install_requirements_markers()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/dist.py", line 567, in _move_install_requirements_markers
      inst_reqs = list(pkg_resources.parse_requirements(spec_inst_reqs))
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/__init__.py", line 3098, in parse_requirements
      yield Requirement(line)
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/__init__.py", line 3108, in __init__
      super(Requirement, self).__init__(requirement_string)
    File "/usr/local/lib/python3.9/dist-packages/pkg_resources/_vendor/packaging/requirements.py", line 104, in __init__
      raise InvalidRequirement(
  pkg_resources.extern.packaging.requirements.InvalidRequirement: Parse error at "'and plat'": Expected stringEnd
  ----------------------------------------
WARNING: Discarding file:///home/pi/luma.led_matrix. Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmp96j6zc13 Check the logs for full command output.
ERROR: Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmp96j6zc13 Check the logs for full command output.

I don't know how to interpret the warning and error messages. How to proceed to get luma.led_matrix to work with my ZeroSeg 7-Segment display and the "Bullseye" install? Help would be much appreciated. Thank you.

thijstriemstra commented 2 years ago

can you paste content of setup.cfg? looks like you made a typo

linuxminty commented 2 years ago

Thank you for your reply. Here's the requested output from setup.cfg:

pi@raspberrypi-4B:~/luma.led_matrix $ cat setup.cfg
[metadata]
name = luma.led_matrix
version = attr: luma.led_matrix.__version__
description = A library to drive a MAX7219 LED serializer (using SPI) and WS2812 NeoPixels (using DMA)
long_description = file: README.rst, CONTRIBUTING.rst, CHANGES.rst
long_description_content_type = text/x-rst
keywords = raspberry pi, rpi, led, max7219, matrix, seven segment, 7 segment, neopixel, neosegment, ws2812, ws281x, apa102, unicorn-phat, unicorn-hat, unicorn-hat-hd
author = Richard Hull
author_email = richard.hull@destructuring-bind.org
url = https://github.com/rm-hull/luma.led_matrix
license = MIT
classifiers =
    License :: OSI Approved :: MIT License
    Development Status :: 5 - Production/Stable
    Intended Audience :: Education
    Intended Audience :: Developers
    Topic :: Education
    Topic :: System :: Hardware
    Topic :: System :: Hardware :: Hardware Drivers
    Programming Language :: Python :: 3
    Programming Language :: Python :: 3.6
    Programming Language :: Python :: 3.7
    Programming Language :: Python :: 3.8
    Programming Language :: Python :: 3.9

[options]
zip_safe = False
packages = find:
python_requires = >=3.6, <4
namespace_packages = luma
install_requires =
    luma.core>=2.2.0
    platform_machine=="armv7l" and platform_system=="Linux"
    rpi_ws281x; platform_machine=="armv7l" and platform_system=="Linux"
tests_require =
    pytest
    pytest-cov
    pytest-timeout

[options.extras_require]
docs = sphinx>=1.5.1
qa = flake8; rstcheck
test = pytest; pytest-cov; pytest-timeout

[bdist_wheel]
universal = 1

[flake8]
ignore = E126, E127, E128, E241, E402, E501, E731, E741
exclude =
    .tox,
    # No need to traverse our git directory
    .git,
    .vscode,
    # There's no value in checking cache directories
    __pycache__,
    doc,
    build,
    dist

thijstriemstra commented 2 years ago

in your setup.cfg you made a typo, replace

install_requires =
    luma.core>=2.2.0
    platform_machine=="armv7l" and platform_system=="Linux"
    rpi_ws281x; platform_machine=="armv7l" and platform_system=="Linux"

with

install_requires =
    luma.core>=2.2.0
    rpi_ws281x; platform_machine=="armv7l" and platform_system=="Linux"

linuxminty commented 2 years ago

Hello Thijs--Success!!! Your guidance worked and the ZeroSeg is again displaying time and date on the Raspberry Pi with "Bullseye" installed. Thank you so much for taking the time to get this working for me!

One additional question, if I may: After making your suggested changes to setup.cnfg, I ran pip install -e .again and got the following:

Defaulting to user installation because normal site-packages is not writeable
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Obtaining file:///home/pi/luma.led_matrix
  Installing build dependencies ... done
  Checking if build backend supports build_editable ... done
  Getting requirements to build wheel ... done
  Preparing metadata (pyproject.toml) ... done
Collecting rpi-ws281x
  Downloading https://www.piwheels.org/simple/rpi-ws281x/rpi_ws281x-4.3.1-cp39-cp39-linux_armv7l.whl (117 kB)
     |████████████████████████████████| 117 kB 333 kB/s            
Collecting luma.core>=2.2.0
  Downloading https://www.piwheels.org/simple/luma-core/luma.core-2.3.1-py2.py3-none-any.whl (71 kB)
     |████████████████████████████████| 71 kB 107 kB/s            
Requirement already satisfied: smbus2 in /usr/local/lib/python3.9/dist-packages (from luma.core>=2.2.0->luma.led-matrix==1.5.0) (0.4.1)
Requirement already satisfied: RPI.GPIO in /usr/lib/python3/dist-packages (from luma.core>=2.2.0->luma.led-matrix==1.5.0) (0.7.0)
Requirement already satisfied: deprecated in /usr/local/lib/python3.9/dist-packages (from luma.core>=2.2.0->luma.led-matrix==1.5.0) (1.2.13)
Requirement already satisfied: cbor2 in /usr/local/lib/python3.9/dist-packages (from luma.core>=2.2.0->luma.led-matrix==1.5.0) (5.4.2)
Requirement already satisfied: spidev in /usr/lib/python3/dist-packages (from luma.core>=2.2.0->luma.led-matrix==1.5.0) (3.5)
Requirement already satisfied: pyftdi in /usr/local/lib/python3.9/dist-packages (from luma.core>=2.2.0->luma.led-matrix==1.5.0) (0.53.3)
Requirement already satisfied: pillow>=4.0.0 in /usr/lib/python3/dist-packages (from luma.core>=2.2.0->luma.led-matrix==1.5.0) (8.1.2)
Requirement already satisfied: wrapt<2,>=1.10 in /usr/lib/python3/dist-packages (from deprecated->luma.core>=2.2.0->luma.led-matrix==1.5.0) (1.12.1)
Requirement already satisfied: pyusb!=1.2.0,>=1.0.0 in /usr/local/lib/python3.9/dist-packages (from pyftdi->luma.core>=2.2.0->luma.led-matrix==1.5.0) (1.2.1)
Requirement already satisfied: pyserial>=3.0 in /usr/lib/python3/dist-packages (from pyftdi->luma.core>=2.2.0->luma.led-matrix==1.5.0) (3.5b0)
Installing collected packages: rpi-ws281x, luma.core, luma.led-matrix
  Running setup.py develop for luma.led-matrix
    ERROR: Command errored out with exit status 1:
     command: /usr/bin/python3 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/home/pi/luma.led_matrix/setup.py'"'"'; __file__='"'"'/home/pi/luma.led_matrix/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' develop --no-deps --user --prefix=
         cwd: /home/pi/luma.led_matrix/
    Complete output (32 lines):
    running develop
    /usr/local/lib/python3.9/dist-packages/setuptools/command/easy_install.py:156: EasyInstallDeprecationWarning: easy_install command is deprecated. Use build and pip and other standards-based tools.
      warnings.warn(
    WARNING: The user site-packages directory is disabled.
    /usr/local/lib/python3.9/dist-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
      warnings.warn(
    error: can't create or remove files in install directory

    The following error occurred while trying to add or remove files in the
    installation directory:

        [Errno 13] Permission denied: '/usr/local/lib/python3.9/dist-packages/test-easy-install-4345.write-test'

    The installation directory you specified (via --install-dir, --prefix, or
    the distutils default setting) was:

        /usr/local/lib/python3.9/dist-packages/

    Perhaps your account does not have write access to this directory?  If the
    installation directory is a system-owned directory, you may need to sign in
    as the administrator or "root" account.  If you do not have administrative
    access to this machine, you may wish to choose a different installation
    directory, preferably one that is listed in your PYTHONPATH environment
    variable.

    For information on other options, you may wish to consult the
    documentation at:

      https://setuptools.pypa.io/en/latest/deprecated/easy_install.html

    Please make the appropriate changes for your system and try again.

    ----------------------------------------
ERROR: Command errored out with exit status 1: /usr/bin/python3 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/home/pi/luma.led_matrix/setup.py'"'"'; __file__='"'"'/home/pi/luma.led_matrix/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' develop --no-deps --user --prefix= Check the logs for full command output.

Due to the above reference to "permission denied," I then tried sudo pip install -e . and it worked. My only concern is the concluding warning of that successful output:

WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv

Does this pose a problem for future use of the system package manager?

Again, thank you very much for your excellent support!

thijstriemstra commented 2 years ago

Does this pose a problem for future use of the system package manager?

No, don't worry about it.

radkechr commented 2 years ago

Remove the ws2812 library from setup.cfg (download tarball or do git checkout of source) and running pip install -e . should workaround the issue.

After doing this, I encounter "ModuleNotFoundError: No module named 'luma.led_matrix'" error

joedellerfc commented 2 years ago

I'm having the same trouble as radkechr, I modified the setup.cfg, ran pip install -e . which ran OK, then tried to run an example and get the ModuleNotFoundError on the import luma.led_matrix

radkechr commented 2 years ago

I'm having the same trouble as radkechr, I modified the setup.cfg, ran pip install -e . which ran OK, then tried to run an example and get the ModuleNotFoundError on the import luma.led_matrix

Joe, to get around it I just used the previous version of raspi os (“buster”), and the package installed per the instructions, and you don’t need to do any of this.

nsauter commented 2 years ago

I have the same issue as @joedellerfc & @radkechr, but installing buster is no real option since this is a 'old' os. Does anybody now how to fix that?

thijstriemstra commented 2 years ago

then tried to run an example and get the ModuleNotFoundError on the import luma.led_matrix

we need command(s) you ran and full traceback/error message in order to help. going back to buster is not an option imo.

nsauter commented 2 years ago

@thijstriemstra Thats the error:

pi@raspberrypi:~/luma.led_matrix $ python examples/matrix_demo.py
Traceback (most recent call last):
  File "examples/matrix_demo.py", line 10, in <module>
    from luma.led_matrix.device import max7219
ImportError: No module named luma.led_matrix.device

joedellerfc commented 2 years ago

I'm having the same trouble as radkechr, I modified the setup.cfg, ran pip install -e . which ran OK, then tried to run an example and get the ModuleNotFoundError on the import luma.led_matrix

Joe, to get around it I just used the previous version of raspi os (“buster”), and the package installed per the instructions, and you don’t need to do any of this.

Thanks for the tip, will give that a go.

thijstriemstra commented 2 years ago

@nsauter try python --version and make sure it's python 3. Make sure to install it using pip for python3, e.g. pip3.

nsauter commented 2 years ago

There is only python3 installed in newer os Images since python2 is obsolete.

thijstriemstra commented 2 years ago

I don't know how you installed luma.led_matrix, what the output was etc. Is luma.led_matrix or luma.core included when you run pip3 list? And what about python -m pip list?

suronw commented 2 years ago

I'm having the same issue. Here are my steps and error message:

git clone https://github.com/rm-hull/luma.led_matrix.git
cd luma.led_matrix
sudo pip3 install -e .

error message:

Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Obtaining file:///home/pi/Downloads/luma.led_matrix
  Installing build dependencies ... done
  Checking if build backend supports build_editable ... done
  Getting requirements to build wheel ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmpmci60wz4
       cwd: /home/pi/Downloads/luma.led_matrix
  Complete output (48 lines):
  Traceback (most recent call last):
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 419, in _parse_attr
      return getattr(StaticModule(module_name), attr_name)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 27, in __init__
      with open(spec.origin) as strm:
  AttributeError: 'NoneType' object has no attribute 'origin'

  During handling of the above exception, another exception occurred:

  Traceback (most recent call last):
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in <module>
      main()
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
      json_out['return_val'] = hook(**hook_input['kwargs'])
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 130, in get_requires_for_build_wheel
      return hook(config_settings)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 162, in get_requires_for_build_wheel
      return self._get_build_requires(
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 143, in _get_build_requires
      self.run_setup()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 158, in run_setup
      exec(compile(code, __file__, 'exec'), locals())
    File "setup.py", line 7, in <module>
      setuptools.setup()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/__init__.py", line 155, in setup
      return distutils.core.setup(**attrs)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/_distutils/core.py", line 122, in setup
      dist.parse_config_files()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/dist.py", line 804, in parse_config_files
      parse_configuration(
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 158, in parse_configuration
      meta.parse()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 498, in parse
      section_parser_method(section_options)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 469, in parse_section
      self[name] = value
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 222, in __setitem__
      value = parser(value)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 599, in _parse_version
      version = self._parse_attr(value, self.package_dir)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 422, in _parse_attr
      module = importlib.import_module(module_name)
    File "/usr/lib/python3.9/importlib/__init__.py", line 127, in import_module
      return _bootstrap._gcd_import(name[level:], package, level)
    File "<frozen importlib._bootstrap>", line 1030, in _gcd_import
    File "<frozen importlib._bootstrap>", line 1007, in _find_and_load
    File "<frozen importlib._bootstrap>", line 984, in _find_and_load_unlocked
  ModuleNotFoundError: No module named 'luma.led_matrix'
  ----------------------------------------
WARNING: Discarding file:///home/pi/Downloads/luma.led_matrix. Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmpmci60wz4 Check the logs for full command output.
ERROR: Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmpmci60wz4 Check the logs for full command output.

thijstriemstra commented 2 years ago

@suronw What version of Python? Did you compile it from source? What version of pip (pip --version)?

Also try running python3 -m pip install --upgrade setuptools (with sudo if that fails)

suronw commented 2 years ago

pip 21.3.1 from /usr/local/lib/python3.9/dist-packages/pip (python 3.9)

tired running python3 -m pip install --upgrade setuptools Defaulting to user installation because normal site-packages is not writeable Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: setuptools in /usr/local/lib/python3.9/dist-packages (60.2.0)

same version

RPI-first commented 2 years ago

Dear All, anybody solved this installtion issue? I have the issue any more with RPI4.

Executed Commands:

sudo apt install perl libdevice-serialport-perl libio-socket-ssl-perl libwww-perl libxml-simple-perl
sudo apt-get install libdatetime-perl
sudo usermod -a -G spi,gpio pi
sudo apt install build-essential python3-dev python3-pip libfreetype6-dev libjpeg-dev libopenjp2-7 libtiff5
sudo -H pip install --upgrade --ignore-installed pip setuptools
git clone https://github.com/rm-hull/luma.led_matrix.git
cd luma.led_matrix

Remove "ws2812" and "platform_machine=="armv7l" and platform_system=="Linux" in der setup.cfg Datei

sudo pip install -e .

python matrix_demo.py
Traceback (most recent call last):
File "/home/pi/luma.led_matrix/examples/matrix_demo.py", line 10, in
from luma.led_matrix.device import max7219
ModuleNotFoundError: No module named 'luma.led_matrix'

pip3 list | grep luma
luma.core 2.3.1

Could anyone help me? (I wounder that pip3 list luma.led_matrix missing)

Thank you very much!

jarleven commented 2 years ago

Same here on Bullseye


pi@raspberrypi:~ $ cd luma.led_matrix/
pi@raspberrypi:~/luma.led_matrix $ vi setup.cfg
pi@raspberrypi:~/luma.led_matrix $ pip install -e .
Defaulting to user installation because normal site-packages is not writeable
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Obtaining file:///home/pi/luma.led_matrix
  Installing build dependencies ... done
  Checking if build backend supports build_editable ... done
  Getting requirements to build wheel ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmpsy_4173u
       cwd: /home/pi/luma.led_matrix
  Complete output (48 lines):
  Traceback (most recent call last):
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 419, in _parse_attr
      return getattr(StaticModule(module_name), attr_name)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 27, in __init__
      with open(spec.origin) as strm:
  AttributeError: 'NoneType' object has no attribute 'origin'

  During handling of the above exception, another exception occurred:

  Traceback (most recent call last):
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in <module>
      main()
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
      json_out['return_val'] = hook(**hook_input['kwargs'])
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 130, in get_requires_for_build_wheel
      return hook(config_settings)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 162, in get_requires_for_build_wheel
      return self._get_build_requires(
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 143, in _get_build_requires
      self.run_setup()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 158, in run_setup
      exec(compile(code, __file__, 'exec'), locals())
    File "setup.py", line 7, in <module>
      setuptools.setup()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/__init__.py", line 155, in setup
      return distutils.core.setup(**attrs)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/_distutils/core.py", line 122, in setup
      dist.parse_config_files()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/dist.py", line 804, in parse_config_files
      parse_configuration(
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 158, in parse_configuration
      meta.parse()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 498, in parse
      section_parser_method(section_options)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 469, in parse_section
      self[name] = value
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 222, in __setitem__
      value = parser(value)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 599, in _parse_version
      version = self._parse_attr(value, self.package_dir)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 422, in _parse_attr
      module = importlib.import_module(module_name)
    File "/usr/lib/python3.9/importlib/__init__.py", line 127, in import_module
      return _bootstrap._gcd_import(name[level:], package, level)
    File "<frozen importlib._bootstrap>", line 1030, in _gcd_import
    File "<frozen importlib._bootstrap>", line 1007, in _find_and_load
    File "<frozen importlib._bootstrap>", line 984, in _find_and_load_unlocked
  ModuleNotFoundError: No module named 'luma.led_matrix'
  ----------------------------------------
WARNING: Discarding file:///home/pi/luma.led_matrix. Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_proce                                                             ss/_in_process.py get_requires_for_build_wheel /tmp/tmpsy_4173u Check the logs for full command output.
ERROR: Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel                                                              /tmp/tmpsy_4173u Check the logs for full command output.
pi@raspberrypi:~/luma.led_matrix $

jarleven commented 2 years ago

sudo and verbose build

pi@raspberrypi:~/luma.led_matrix $ sudo pip install -vv -e .
Using pip 21.3.1 from /usr/local/lib/python3.9/dist-packages/pip (python 3.9)
Non-user install because site-packages writeable
Created temporary directory: /tmp/pip-ephem-wheel-cache-d19vu8vi
Created temporary directory: /tmp/pip-req-tracker-71qpdrqe
Initialized build tracking at /tmp/pip-req-tracker-71qpdrqe
Created build tracker: /tmp/pip-req-tracker-71qpdrqe
Entered build tracker: /tmp/pip-req-tracker-71qpdrqe
Created temporary directory: /tmp/pip-install-fxkr0127
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Obtaining file:///home/pi/luma.led_matrix
  Added file:///home/pi/luma.led_matrix to build tracker '/tmp/pip-req-tracker-71qpdrqe'
  Created temporary directory: /tmp/pip-build-env-hx1q4235
  Created temporary directory: /tmp/pip-standalone-pip-wnt25btp
  Running command /usr/bin/python3 /tmp/pip-standalone-pip-wnt25btp/__env_pip__.zip/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-hx1q4235/overlay --no-warn-script-location -v --no-binary :none: --only-binary :none: -i https://pypi.org/simple --extra-index-url https://www.piwheels.org/simple -- 'setuptools >= 40.6.0' wheel
  Using pip 21.3.1 from /tmp/pip-standalone-pip-wnt25btp/__env_pip__.zip/pip (python 3.9)
  Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple, https://www.piwheels.org/simple
  Collecting setuptools>=40.6.0
    Using cached https://www.piwheels.org/simple/setuptools/setuptools-60.5.0-py3-none-any.whl (958 kB)
  Collecting wheel
    Using cached https://www.piwheels.org/simple/wheel/wheel-0.37.1-py2.py3-none-any.whl (35 kB)
  Installing collected packages: wheel, setuptools
    Creating /tmp/pip-build-env-hx1q4235/overlay/bin
    changing mode of /tmp/pip-build-env-hx1q4235/overlay/bin/wheel to 755
  Successfully installed setuptools-60.5.0 wheel-0.37.1
  WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
  Installing build dependencies ... done
  Running command /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py _supported_features /tmp/tmp1s39fhgc
  Checking if build backend supports build_editable ... done
  Running command /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmpu1kbo0xs
  Traceback (most recent call last):
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 419, in _parse_attr
      return getattr(StaticModule(module_name), attr_name)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 27, in __init__
      with open(spec.origin) as strm:
  AttributeError: 'NoneType' object has no attribute 'origin'

  During handling of the above exception, another exception occurred:

  Traceback (most recent call last):
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in <module>
      main()
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
      json_out['return_val'] = hook(**hook_input['kwargs'])
    File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 130, in get_requires_for_build_wheel
      return hook(config_settings)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 162, in get_requires_for_build_wheel
      return self._get_build_requires(
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 143, in _get_build_requires
      self.run_setup()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/build_meta.py", line 158, in run_setup
      exec(compile(code, __file__, 'exec'), locals())
    File "setup.py", line 7, in <module>
      setuptools.setup()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/__init__.py", line 155, in setup
      return distutils.core.setup(**attrs)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/_distutils/core.py", line 122, in setup
      dist.parse_config_files()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/dist.py", line 804, in parse_config_files
      parse_configuration(
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 158, in parse_configuration
      meta.parse()
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 498, in parse
      section_parser_method(section_options)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 469, in parse_section
      self[name] = value
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 222, in __setitem__
      value = parser(value)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 599, in _parse_version
      version = self._parse_attr(value, self.package_dir)
    File "/usr/local/lib/python3.9/dist-packages/setuptools/config.py", line 422, in _parse_attr
      module = importlib.import_module(module_name)
    File "/usr/lib/python3.9/importlib/__init__.py", line 127, in import_module
      return _bootstrap._gcd_import(name[level:], package, level)
    File "<frozen importlib._bootstrap>", line 1030, in _gcd_import
    File "<frozen importlib._bootstrap>", line 1007, in _find_and_load
    File "<frozen importlib._bootstrap>", line 984, in _find_and_load_unlocked
  ModuleNotFoundError: No module named 'luma.led_matrix'
  Getting requirements to build wheel ... error
WARNING: Discarding file:///home/pi/luma.led_matrix. Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmpu1kbo0xs Check the logs for full command output.
ERROR: Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmpu1kbo0xs Check the logs for full command output.
Exception information:
Traceback (most recent call last):
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/cli/base_command.py", line 164, in exc_logging_wrapper
    status = run_func(*args)
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/cli/req_command.py", line 205, in wrapper
    return func(self, options, args)
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/commands/install.py", line 338, in run
    requirement_set = resolver.resolve(
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/resolution/resolvelib/resolver.py", line 73, in resolve
    collected = self.factory.collect_root_requirements(root_reqs)
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/resolution/resolvelib/factory.py", line 468, in collect_root_requirements
    req = self._make_requirement_from_install_req(
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/resolution/resolvelib/factory.py", line 445, in _make_requirement_from_install_req
    raise self._build_failures[ireq.link]
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/resolution/resolvelib/factory.py", line 186, in _make_candidate_from_link
    self._editable_candidate_cache[link] = EditableCandidate(
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/resolution/resolvelib/candidates.py", line 306, in __init__
    super().__init__(
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/resolution/resolvelib/candidates.py", line 156, in __init__
    self.dist = self._prepare()
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/resolution/resolvelib/candidates.py", line 225, in _prepare
    dist = self._prepare_distribution()
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/resolution/resolvelib/candidates.py", line 316, in _prepare_distribution
    return self._factory.preparer.prepare_editable_requirement(self._ireq)
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/operations/prepare.py", line 599, in prepare_editable_requirement
    dist = _get_prepared_distribution(
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/operations/prepare.py", line 58, in _get_prepared_distribution
    abstract_dist.prepare_distribution_metadata(finder, build_isolation)
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/distributions/sdist.py", line 47, in prepare_distribution_metadata
    self._install_build_reqs(finder)
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/distributions/sdist.py", line 106, in _install_build_reqs
    build_reqs = self._get_build_requires_wheel()
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/distributions/sdist.py", line 83, in _get_build_requires_wheel
    return backend.get_requires_for_build_wheel()
  File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/wrappers.py", line 172, in get_requires_for_build_wheel
    return self._call_hook('get_requires_for_build_wheel', {
  File "/usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/wrappers.py", line 322, in _call_hook
    self._subprocess_runner(
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/utils/subprocess.py", line 282, in runner
    call_subprocess(
  File "/usr/local/lib/python3.9/dist-packages/pip/_internal/utils/subprocess.py", line 254, in call_subprocess
    raise InstallationSubprocessError(proc.returncode, command_desc)
pip._internal.exceptions.InstallationSubprocessError: Command errored out with exit status 1: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pep517/in_process/_in_process.py get_requires_for_build_wheel /tmp/tmpu1kbo0xs Check the logs for full command output.
Removed file:///home/pi/luma.led_matrix from build tracker '/tmp/pip-req-tracker-71qpdrqe'
Removed build tracker: '/tmp/pip-req-tracker-71qpdrqe'
pi@raspberrypi:~/luma.led_matrix $

jarleven commented 2 years ago

It works when using virtual environment.

pi@raspberrypi:~ $ sudo apt-get install python3-venv
pi@raspberrypi:~ $ python3 -m venv matrix-env

pi@raspberrypi:~ $ source matrix-env/bin/activate

(matrix-env) pi@raspberrypi:~ $ git clone https://github.com/rm-hull/luma.led_matrix.git

(matrix-env) pi@raspberrypi:~ $ cd luma.led_matrix/

(matrix-env) pi@raspberrypi:~/luma.led_matrix $ vi setup.cfg

(matrix-env) pi@raspberrypi:~/luma.led_matrix $ pip install -vvv -e .

(matrix-env) pi@raspberrypi:~/luma.led_matrix $ python3 examples/matrix_demo.py
Created device
MAX7219 LED Matrix Demo

jarleven commented 2 years ago

(matrix-env) pi@raspberrypi:~/luma.led_matrix $ git diff
diff --git a/setup.cfg b/setup.cfg
index 3aeee44..23fa5e2 100644
--- a/setup.cfg
+++ b/setup.cfg
@@ -31,7 +31,6 @@ python_requires = >=3.6, <4
 namespace_packages = luma
 install_requires =
     luma.core>=2.2.0
-    rpi_ws281x; platform_machine=="armv7l" and platform_system=="Linux"
 tests_require =
     pytest
     pytest-cov
(matrix-env) pi@raspberrypi:~/luma.led_matrix $

jarleven commented 2 years ago

(matrix-env) pi@raspberrypi:~/luma.led_matrix $ python3 -m pip list
Package         Version Location
--------------- ------- ------------------------
cbor2           5.4.2
Deprecated      1.2.13
luma.core       2.3.1
luma.led-matrix 1.6.0   /home/pi/luma.led_matrix
Pillow          9.0.0
pip             20.3.4
pkg-resources   0.0.0
pyftdi          0.53.3
pyserial        3.5
pyusb           1.2.1
RPi.GPIO        0.7.0
setuptools      44.1.1
smbus2          0.4.1
spidev          3.5
wrapt           1.13.3

pi@raspberrypi:~ $ python3 -m pip list
Package       Version
------------- ---------
cbor2         5.4.2
certifi       2020.6.20
chardet       4.0.0
colorzero     1.1
Deprecated    1.2.13
distro        1.5.0
gpiozero      1.6.2
idna          2.10
luma.core     2.3.1
Pillow        9.0.0
pip           21.3.1
pyftdi        0.53.3
pyserial      3.5
python-apt    2.2.1
pyusb         1.2.1
requests      2.25.1
RPi.GPIO      0.7.0
setuptools    60.5.0
six           1.16.0
smbus2        0.4.1
spidev        3.5
SQLAlchemy    1.4.29
ssh-import-id 5.10
urllib3       1.26.5
wheel         0.34.2
wrapt         1.13.3

pi@raspberrypi:~ $ sudo python3 -m pip list
Package       Version
------------- ---------
cbor2         5.4.2
certifi       2020.6.20
chardet       4.0.0
colorzero     1.1
Deprecated    1.2.13
distro        1.5.0
gpiozero      1.6.2
idna          2.10
luma.core     2.3.1
Pillow        9.0.0
pip           21.3.1
pyftdi        0.53.3
pyserial      3.5
python-apt    2.2.1
pyusb         1.2.1
requests      2.25.1
RPi.GPIO      0.7.0
setuptools    60.5.0
six           1.16.0
smbus2        0.4.1
spidev        3.5
SQLAlchemy    1.4.29
ssh-import-id 5.10
urllib3       1.26.5
wheel         0.34.2
wrapt         1.13.3

jarleven commented 2 years ago

This is working for me on Bullseye. The last thing I had to add to my script was "export CFLAGS=-fcommon" as specified by arevi9176

wget https://raw.githubusercontent.com/jarleven/flaskapp/a53e8440dbf7e674141aca3e6061c21b14f708a6/luma/setup_matrix.sh && chmod +x setup_matrix.sh && ./setup_matrix.sh

thijstriemstra commented 2 years ago

The last thing I had to add to my script was "export CFLAGS=-fcommon" as specified by arevi9176

This can also be fixed by using pre-release version of RPi.GPIO instead: pip install RPi.GPIO==0.7.1a4

rm-hull / luma.led_matrix