search

robertklep / dsm7-usb-serial-drivers

Synology DSM 7 USB serial drivers
505 stars 83 forks source link

cedarview driver for Tead Sonoff Zigbee 3.0 USB Dongle Plus V2 model "ZBDongle-E" #49

Open fruitvlieg1 opened 1 year ago

fruitvlieg1 commented 1 year ago

Hi Robert, I'm looking for a driver for a Synology DS1513+ to get the USB Dongle working. Home Assistant 2022.10.5

Cedarview driver for Tead Sonoff Zigbee 3.0 USB Dongle Plus V2 model "ZBDongle-E" dsm7.1-usb-serial-drivers firmware: Silicon Labs EFR32MG21

Linux DiskStation 3.10.108 #42962 SMP Tue Oct 18 15:04:45 CST 2022 x86_64 GNU/Linux synology_cedarview_1513+

lsusb

|__usb7 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:04:00.0) hub |__7-1 1a86:55d4:0442 02 1.10 12MBit/s 132mA 2IFs (ITEAD SONOFF Zigbee 3.0 USB Dongle Plus V2 20220811090153)

crw------- 1 root root 166, 0 Nov 27 21:51 /dev/ttyACM0

robertklep commented 1 year ago

Because /dev/ttyACM0 exists, there's already a driver installed for it 😊

fruitvlieg1 commented 1 year ago

Hi Robert thx for the reply!

Ok, there is a driver already installed. which driver is it the new one? but /dev/ttyUSB0 is not there? When continue with installation i received the error chmod 777 /dev/ttyUSB0 doesn't exist

/sbin/modprobe usbserial /sbin/modprobe ftdi_sio /sbin/modprobe cdc-acm chmod 777 /dev/ttyUSB0 chmod 777 /dev/ttyACM0

And i get stuck on the Zigbee Integration: What should i enter? serial device"? /dev/ttyACM0 is wrong??

Radio Type: EZSP = Silicon Labs EmberZNet protocol: Elelabs, HUSBZB-1, Telegesis

Serial device path:

Port speed: 57600 (default)

Data Flow control (software default)

robertklep commented 1 year ago

You probably don't need /dev/ttyUSB0 if you already have /dev/ttyACM0, but I don't use ZHA myself so not sure what the correct settings should be.

If it doesn't work, can you post the output of lsusb -vt?

fruitvlieg1 commented 1 year ago

option: -vt not supported

root@DiskStation:~# lsusb -vt (<class 'getopt.GetoptError'>, GetoptError('option -v not recognized', 'v'), <traceback object at 0x7fbd74bcb6c0>) Usage: lsusb.py [options] Options: -h display this help -i display interface information -I display interface information, even for hubs -u suppress empty hubs -U suppress all hubs -c use colors -e display endpoint info -w display warning if usb.ids is not sorted correctly -f FILE override filename for /usr/share/usb.ids Use lsusb.py -ciu to get a nice overview of your USB devices. root@DiskStation:~#

robertklep commented 1 year ago

lsusb -iI then

fruitvlieg1 commented 1 year ago

root@DiskStation:~# lsusb -iI |usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1a.7) 1-0:1.0 (IF) 09:00:00 1EP () hub |__usb2 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1d.7) 2-0:1.0 (IF) 09:00:00 1EP () hub |2-1 f400:f400:0100 00 2.00 480MBit/s 200mA 1IF (Synology DiskStation 650047CBB9343987) 2-1:1.0 (IF) 08:06:50 2EPs () usb-storage host8 (synoboot) |usb3 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.0) 3-0:1.0 (IF) 09:00:00 1EP () hub |__usb4 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.0) 4-0:1.0 (IF) 09:00:00 1EP () hub |usb5 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.1) 5-0:1.0 (IF) 09:00:00 1EP () hub |usb6 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.2) 6-0:1.0 (IF) 09:00:00 1EP () hub |__usb7 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:04:00.0) 7-0:1.0 (IF) 09:00:00 1EP () ethub |7-1 1a86:55d4:0442 02 1.10 12MBit/s 132mA 2IFs (ITEAD SONOFF Zigbee 3.0 USB Dongle Plus V2 20220811090153) 7-1:1.0 (IF) 02:02:01 1EP () cdc_acm tty/ttyACM1 7-1:1.1 (IF) 0a:00:00 2EPs () cdc_acm |__usb8 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:04:00.0) 8-0:1.0 (IF) 09:00:00 1EP () ethub root@DiskStation:~#

fruitvlieg1 commented 1 year ago

root@DiskStation:~# ls /dev/ttyA* /dev/ttyACM1 root@DiskStation:~#

robertklep commented 1 year ago

Oh great, now it's /dev/ACM1 😭

In any case though, the device is supported without additional drivers. Like I said, I don't use ZHA in Home Assistant so I can't really help you on what the correct configuration should be 🥴

fruitvlieg1 commented 1 year ago

Thanks for your support Robert, Have a nice day!

stanczakp commented 1 year ago

Hello,

I'm also trying to connect the sonoff dongle to my synology nas, but for now without any success.

@fruitvlieg1 have finally got it workin? Did you installed on of the drivers?

@robertklep is it maybe possible to add support for a smart card reader? It is detected as 4-0:1.0 (IF) 09:00:00 1EP () hub |__4-2 0403:6001:0600 00 2.00 12MBit/s 90mA 1IF (FTDI FT232R USB UART AI068S9P) but no tty device is created.

robertklep commented 1 year ago

@stanczakp I would first have to know which (Linux) driver(s) should be used for this device, and then see if it's possible to compile it for DSM. Do you have another Linux machine on which you can test this device to see which driver(s) it requires?

stanczakp commented 1 year ago

@robertklep yes, I have a debian machine, where this device is working. What info should I provide to you?

robertklep commented 1 year ago

@stanczakp when you plug the device into your machine, check dmesg, it should show which driver is loaded for it. Can you create a new issue for this? So we don't bother @fruitvlieg1 with off-topic comments 😅