Mixing not working properly when "Slow (ux:dx)" is configured

[GoogleCodeExporter]

I have a DeltaWing with StickyThrotle Cut (SF_Down) and also Throtle 
compensation (SA-)(When full throtle, the ailerons are moved in a reduced 
portion to avoid sharp movements). Reduction in ailerons is proportional to the 
throtle given. More throtle, more reduction. This is done by the use of 
CURVE1), by this way I got smoth movements at full speed.

What steps will reproduce the problem?
1. The function Throtle compensation works OK but if I add to the mixing 
function the option "SLOW (u2:d2)", CH2 and CH3 goes to cero despite the 
aileron/elevator stick position. (See PICTURE 4)

If Throtle compensation is activated with "SA-", CH2 and CH3 operates acording 
expected (see PICTURE 3)

What is the expected output? What do you see instead?
If I delete the option "SLOW (u2:d2)" from CH02 and CH03, the Throtle 
compensation works perfect. You can select SA- to activate the function and 
!SA- to deactivate the throtle cut.

I uploaded an example, please, DONT FORGET TO RELEASE THE THROTLE with SF_Down 
SWITCH before testing, See attached pictures.

What version of the product are you using? Version 1.48 r2275
On what operating system? Windows XP SP3
Which firmware have you selected ? opentx-taranis-en-r2768

Please provide any additional information below.

(sorry for my bad english)

Kind Regards
Juan Gabriel Vazquez

Original issue reported on code.google.com by jgvazq...@gmail.com on 26 Sep 2013 at 4:38

Attachments:

• Picture2.jpg
• Picture1.jpg
• Picture3.jpg
• Picture4.jpg
• Delta.eepe

[GoogleCodeExporter]

This is an openTX issue. I take it.

Original comment by bson...@gmail.com on 2 Oct 2013 at 12:19

[GoogleCodeExporter]

Issue in openTX now fixed in SVN. 

Original comment by bson...@gmail.com on 2 Oct 2013 at 6:00

• Changed state: Fixed

[GoogleCodeExporter]

Thanks!!!

Original comment by jgvazq...@gmail.com on 2 Oct 2013 at 6:20