i am geting this when i try to backup eeprom ???

[GoogleCodeExporter]

C:/Program Files/companion9x/avrdude.exe -c usbasp -p m64 -U 
eeprom:r:C:/DOCUME~1/Roulitsa/LOCALS~1/Temp/temp.hex:i
================================================================================
=

avrdude.exe: warning: cannot set sck period. please check for usbasp firmware 
update.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude.exe: Device signature = 0x1e9702
avrdude.exe: Expected signature for ATMEGA64 is 1E 96 02
             Double check chip, or use -F to override this check.

avrdude.exe done.  Thank you.

================================================================================
=
AVRDUDE done - exit code 1
================================================================================
=

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?

What version of the product are you using?
On what operating system?
Which firmware have you selected ?

Please provide any additional information below.

Original issue reported on code.google.com by K.Gdonta...@gmail.com on 1 Oct 2013 at 11:35

[GoogleCodeExporter]

1E 97 02 is ATMEGA128. So you have to select openTX/'128 board in your 
preferences

Original comment by bson...@gmail.com on 2 Oct 2013 at 5:09

• Changed state: Invalid

[GoogleCodeExporter]

thank you very much working now.Its realy hard to be a noob :P

Original comment by K.Gdonta...@gmail.com on 2 Oct 2013 at 3:48