Open GoogleCodeExporter opened 8 years ago
May you try from a terminal to issue the following command:
/opt/local/bin/dfu-util -a 0 --dfuse-address 0x08000000 -d 0483:df11
-D/tmp/opentx.bin
where /tmp/opentx.bin is the actual path of the firmware you have downloaded
Thanks
Original comment by romolo.m...@gmail.com
on 1 Nov 2013 at 6:41
[deleted comment]
Romolo,
Thanks for your suggestion. I was able to resolve the issue last night by
downloading and re installing the DFU-Util file which I think may have been
corrupted.
DaleD
Original comment by dadav...@me.com
on 1 Nov 2013 at 3:05
we will keep out dfu-util from next full install
Original comment by romolo.m...@gmail.com
on 3 Nov 2013 at 7:31
Original comment by romolo.m...@gmail.com
on 3 Nov 2013 at 7:31
-when attempting to read message says,impossible to identify radio on your
system, please verify the eeprom disk is connected"
That would mean you pressed the wrong button in C9X, and attempted to read
eeprom, not firmware.
Original comment by bernet.a...@gmail.com
on 3 Nov 2013 at 10:48
Klamath1, you are correct. I realized that I was clicking the wrong button to
read the firmware.
As posted Nov 1, the issues was resolved by reinstalling the DFU-util.
Thanks for your help.
DaleD
Original comment by dadav...@me.com
on 4 Nov 2013 at 1:45
Hi Dale
in the next build of C9X for MAC, dfu-util will no longer be incorporated into
the setup, but it will have to be installed separately.
Thanks for your report
Klamath
Original comment by klamath1977@gmail.com
on 4 Nov 2013 at 2:41
Respect Bossman
Sending you a REAL Jamaican thanks, watch video.
http://www.youtube.com/watch?v=9H0xPWAtaa8
Original comment by dadav...@me.com
on 4 Nov 2013 at 2:49
Original issue reported on code.google.com by
dadav...@me.com
on 31 Oct 2013 at 4:43Attachments: