search

robertoostenveld / arduino

Arduino electronics hacking
http://robertoostenveld.nl/category/arduino/
198 stars 96 forks source link

artnet_neopixel SPIFFS Upload issue? #16

Closed sisensee closed 4 years ago

sisensee commented 4 years ago

Sketch compiles in latest IDE, no obvious errors. SPIFFS Data uploader says it completes upload. unable to browse /index or any other files outside of wifi setup pages.

robertoostenveld commented 4 years ago

is the connection to the http server successful, and is it a spiffs issue or a http issue? Please add in the setup() section somewhere between line 130 and 235 this piece

  server.on("/version", HTTP_GET, []() {
    Serial.println("version");
    server.send(200, "text/plain", version);
  });

Then you can GET http://arttnet.local/version and you should see the firmware version. Or try with http://arttnet.local/dir, which should show you the list of files on the SPIFFS.

What do you see if you listen on the serial interface?

sisensee commented 4 years ago

I do not think the web server is running, it works for the Wifi setup (which made me think web server was working and not even look down that path). I previously was getting file not founds in the serial monitor now I just get nothing. iPhone gives "Safari could not open the page because the server stopped responding"

Serial Monitor " WM: WM: AutoConnect WM: Connecting as wifi client... WM: Using last saved values, should be faster WM: Connection result: WM: 1 WM: WM: Configuring access point... WM: ARTNET WM: Custom AP IP/GW/Subnet WM: AP IP address: WM: 192.168.1.1 WM: HTTP server started WM: Request redirected to captive portal WM: Handle root WM: Request redirected to captive portal WM: Handle root WM: Request redirected to captive portal WM: Handle root WM: Scan done WM: DUP AP: SMS-EMP WM: DUP AP: SMS-EMP WM: DUP AP: SMS-EMP WM: DUP AP: SMS-EMP WM: DUP AP: SMS-VENDOR WM: DUP AP: SMS-VENDOR WM: DUP AP: SMS-VENDOR WM: SMS-EMP WM: -55 WM: SMS-VENDOR WM: -56 WM: SMARTWIRE WM: -61 WM: Sent config page WM: Request redirected to captive portal WM: Handle root WM: WiFi save WM: Sent wifi save page WM: Connecting to new AP WM: Connecting as wifi client... WM: Connection result: WM: 3 connected setup done WM: freeing allocated params! {$�lܞ⸮⸮c⸮o ⸮$⸮ c|⸮⸮⸮p⸮⸮|c⸮p⸮⸮no⸮�$Nn⸮⸮⸮"p⸮#d rlp⸮N⸮ ⸮ l ⸮⸮ cN⸮⸮nl⸮⸮b⸮|⸮N⸮l⸮⸮�d ⸮oNl`Ns⸮ےN B⸮lr⸮⸮n b⸮d⸮⸮ll⸮⸮{$⸮⸮o⸮setup starting loadConfig Failed to open config file WM: WM: AutoConnect WM: Connecting as wifi client... WM: Using last saved values, should be faster WM: Connection result: WM: 3 WM: IP Address: WM: 10.101.235.159 connected setup done WM: freeing allocated params! "

IDE Output for uploading sketch and SPIFFS

` Sketch uses 402008 bytes (38%) of program storage space. Maximum is 1044464 bytes. Global variables use 35156 bytes (42%) of dynamic memory, leaving 46764 bytes for local variables. Maximum is 81920 bytes. esptool.py v2.8-dev 2.8-dev esptool.py v2.8-dev Serial port /dev/cu.SLABUSBtoUART Connecting........ Chip is ESP8266EX Features: WiFi Crystal is 26MHz MAC: ec:fa:bc:05:86:42 Uploading stub... Running stub... Stub running... Configuring flash size... Auto-detected Flash size: 4MB Compressed 406160 bytes to 281371...

Writing at 0x00000000... (5 %) Writing at 0x00004000... (11 %) Writing at 0x00008000... (16 %) Writing at 0x0000c000... (22 %) Writing at 0x00010000... (27 %) Writing at 0x00014000... (33 %) Writing at 0x00018000... (38 %) Writing at 0x0001c000... (44 %) Writing at 0x00020000... (50 %) Writing at 0x00024000... (55 %) Writing at 0x00028000... (61 %) Writing at 0x0002c000... (66 %) Writing at 0x00030000... (72 %) Writing at 0x00034000... (77 %) Writing at 0x00038000... (83 %) Writing at 0x0003c000... (88 %) Writing at 0x00040000... (94 %) Writing at 0x00044000... (100 %) Wrote 406160 bytes (281371 compressed) at 0x00000000 in 24.8 seconds (effective 130.8 kbit/s)... Hash of data verified.

Leaving... Hard resetting via RTS pin... [SPIFFS] data : /Users/seanisensee/Downloads/arduino-master 2/esp8266_artnet_neopixel/data [SPIFFS] size : 3052 [SPIFFS] page : 256 [SPIFFS] block : 8192 /favicon.ico /update.html /index.html /reload_failure.html /hello.html /monitor.js /cat.jpg /style.css /jquery-3.1.1.min.js /reload_success.html /settings.html /monitor.html /settings.js [SPIFFS] upload : /var/folders/c6/q93qkd1x4lb9n1l3jfxy0bnh0000gn/T/arduino_build_232733/esp8266_artnet_neopixel.spiffs.bin [SPIFFS] address : 0x100000 [SPIFFS] reset : nodemcu [SPIFFS] port : /dev/cu.SLAB_USBtoUART [SPIFFS] speed : 115200 [SPIFFS] python : /Users/seanisensee/Library/Arduino15/packages/esp8266/tools/python/3.7.2-post1/python [SPIFFS] uploader : /Users/seanisensee/Library/Arduino15/packages/esp8266/hardware/esp8266/2.5.2/tools/upload.py

esptool.py v2.8-dev Serial port /dev/cu.SLABUSBtoUART Connecting........ Chip is ESP8266EX Features: WiFi Crystal is 26MHz MAC: ec:fa:bc:05:86:42 Uploading stub... Running stub... Stub running... Configuring flash size... Auto-detected Flash size: 4MB Compressed 3125248 bytes to 53323...

Writing at 0x00100000... (25 %) Writing at 0x00104000... (50 %) Writing at 0x00108000... (75 %) Writing at 0x0010c000... (100 %) Wrote 3125248 bytes (53323 compressed) at 0x00100000 in 4.7 seconds (effective 5283.7 kbit/s)... Hash of data verified.

Leaving... Hard resetting via RTS pin... `

robertoostenveld commented 4 years ago

what does http://arttnet.local/version return? That link should confirm that the http server is running, and does not use anything from SPIFS.

Can you ping it? Is there any network connection possible after going through the wiki manager configuration?

sisensee commented 4 years ago

I can ping it, get no response from /version at all and when I do a port scan on the IP I get no open ports at all. So the webserver is not functioning.

robertoostenveld commented 4 years ago

Then it is not a SPIFS problem, but a web server problem. Probably you are working with libraries that have all been updated to more recent versions compared to the last time I compiled and flashed the firmware. I propose you try first with a simpler sketch, e.g. with a hard-wired wifi setup (skipping WiFiManager) and e.g. one of https://github.com/esp8266/Arduino/tree/master/libraries/ESP8266WebServer/examples. If that works, you can increase the complexity of the sketch step by step.

sisensee commented 4 years ago

if I reset and join Artnet wifi manager is running on port 80 (as expected) But once the device is on network web server is not opening a port.

Screen Shot 2019-09-24 at 7 57 11 AM
sisensee commented 4 years ago

You sir are 100% correct. Even the basic web server examples are not functioning, can I ask what version (from board manager) you are using for the ESP8266? Currently I'm on 2.5.2

robertoostenveld commented 4 years ago

how can I quickly determine the ESP8266 version?

sisensee commented 4 years ago

Arduino IDE > Tools > Board > Board Manager > Search "esp8266" PS Thanks for the responses!

sisensee commented 4 years ago

Ive tried this with a few NodeMCU's and a Wemos (d1 mini lite) and still have the same results so I don't think its chip,

sisensee commented 4 years ago

Also running Arduino IDE 1.8.10 (thought id mentioned that)

robertoostenveld commented 4 years ago

I have not done anything with Arduino for some time, but did get a new MacBook recently. I think all software was properly transferred from the old one to the one I am currently working on:

I have Arduino 1.8.7, and under board manager I see that I have esp8266 version 2.4.2. So both are older than the ones you are working with.

Since I don't have reasons to believe that it is a problem specific to my sketch, let me close this issue.

sisensee commented 4 years ago

Thank you for the assistance and pointing me in the right direction!