NECTouch 1.1 doesn't work on full surface

GoogleCodeExporter commented 9 years ago

What steps will reproduce the problem?
1. Start NECTouch
2. Calibrate
3. Try touch-feedback

What is the expected output? What do you see instead?
Normally it would respond to movements in the whole area(as shown in the 
Youtube video), but somehow it either doesn't respond, or only on a small part.

What version of the product are you using? On what operating system?
1.1
Windows 7 64bit

Please provide any additional information below.
I've tried recalibrating, going from a flat to a curved/vertical surface, but 
with no improvements.

Original issue reported on code.google.com by nle...@gmail.com on 24 Oct 2011 at 10:47

GoogleCodeExporter commented 9 years ago

I'm not sure i fully understand your problem, but it seems that it's a 
calibration problem.
Maybe it's a min/max distance setting problem, or a min/max blob problem.
 - are you on MacOS, linux or Win ?
 - did you try changing min / max diff, or min / max blob size ?

Original comment by bkuperb...@gmail.com on 25 Oct 2011 at 6:41

Changed state: Accepted

GoogleCodeExporter commented 9 years ago

I fixed it, the problem was not in the settings. The problem was that I had to 
table too close to the Kinect(so not in view). Switching to Depth-view showed 
this clearly and moving the Kinect back solved it.

Thanks for the help. :-)

Original comment by nle...@gmail.com on 2 Nov 2011 at 12:15

robksawyer / bikinect

NECTouch 1.1 doesn't work on full surface #5