robnolen commented 8 years ago

Pivotal Guest is much better.

leemikes commented 8 years ago

This works @ Isilon offices when using MiFi. Need to verify it it'll work using EMCCafe WiFi (guest WiFi)

leemikes commented 8 years ago

For EMC Isilon Offices:

EMC Cafe and EMC Corp WiFi are not going to work for the particle photon itself. (for all the obvious reasons). hardline wired ethernet to your laptop works for particle.io discovery/add to cloud IF Photon pairs to Verizon MiFi or equiv. (See below).

For Pivotal Labs-Seattle offices: Still getting validation of open Wifi connections @pivotal-Seattle

With EMC Corp (hardwired) and WiFi for Photon to Verizon MiFi

              _   _      _        _

**| |(_) | | (_) | ' \ / _` | '| | |/ _| |/ \ | |/ \ | |) | (| | | | || | (| | /| | () | | .**/ ,|| |||_|()|/ |_| https://particle.io/

Setup is easy! Let's get started... It appears as though you are already logged in as leemikes@msn.com ? Would you like to log in with a different account? No

! PROTIP: Hold the MODE/SETUP button on your device until it blinks blue! ! PROTIP: Please make sure you are connected to the internet.

No devices detected via USB. ? Would you like to scan for nearby Photons in Wi-Fi setup mode? Yes

! PROTIP: Wireless setup of Photons works like a wizard! ! PROTIP: We will automagically change the Wi-Fi network to which your computer is connected. ! PROTIP: You will lose your connection to the internet periodically.

? Found "Photon-WCA7". Would you like to perform setup on this one now? Yes

! PROTIP: You will need to know the password for your Wi-Fi network (if any) to proceed. ! PROTIP: You can press ctrl + C to quit setup at any time.

Obtained magical secure claim code.

Hey! We successfully connected to Photon-WCA7

Now to configure our precious Photon-WCA7

! PROTIP: If you want to skip scanning, or your network is configured as a ! PROTIP: non-broadcast network, please enter manual mode to proceed...

\ NOTE: MUST USE MANUAL WIFI SETTINGS. Auto-Discovery sometimes works but not reliably at Isilon offices..**

? Would you like to manually enter your Wi-Fi network configuration? Yes ? Please enter the SSID of your Wi-Fi network: VerzionMiFi ? Please enter your Wi-Fi network password (leave blank for none): ? Please select the security used by your Wi-Fi network: WPA2

Here's what we're going to send to the Photon:

Wi-Fi Network: VerzionMiFi Password: Security: WPA2

? Would you like to continue with the information shown above? Yes

Obtaining device information... Requesting public key from the device... Setting the magical cloud claim code... Telling the Photon to apply your Wi-Fi configuration... The Photon will now attempt to connect to your Wi-Fi network...

Configuration complete! You've just won the internet! ? Would you like to return this computer to the wireless network you just config? Would you like to return this computer to the wireless network you just config? Would you like to return this computer to the wireless network you just configured? Yes ! Network not ready yet, retrying...

! Network not ready yet, retrying...

! It doesn't look like your Photon has made it to the cloud yet.

? What would you like to do? (Use arrow keys) ❯ Reconfigure the Wi-Fi settings of the Photon

Check again to see if the Photon has connected

robnolen / devopsday

Test wifi network connectivity @ Isilon offices, #11

With EMC Corp (hardwired) and WiFi for Photon to Verizon MiFi

Check again to see if the Photon has connected