search

robomakery / pvc-powerchair

Open-source, low-cost, pediatric powerchair
Other
11 stars 6 forks source link

Print joystick enclosure #35

Closed dylanvaughn closed 6 years ago

dylanvaughn commented 7 years ago

Current part:

https://github.com/robomakery/pvc-powerchair/blob/develop/hardware/printed_parts/JoystickEnclosure.STL

Needs to be created in OnShape. We also would like to add a bottom plate which can be screwed into this piece.

dylanvaughn commented 7 years ago

Update from planning meeting:

dylanvaughn commented 7 years ago

Since we don't have the old joystick board we can make this lower profile and add a lower piece. Still planning on 3d printing this piece.

dylanvaughn commented 7 years ago

for v2 we are going to print the part as is

badiozam commented 7 years ago

Hey Dylan, do you have the direct link to OnShape? I found https://cad.onshape.com/documents/afa971ef5507b38d69394b06/w/1b6f32bd7bb64483d9a5f636/e/bac4a40611c0be1aa8d12fcc but I don't think that's the right one because it doesn't have the part on there.

McCAndrew88 commented 7 years ago

I CADed it up a while ago and have a lower profile that is in development. I can share it with you, what is your email? @badiozam

badiozam commented 7 years ago

Hey Andrew, It's my github username at yahoo. Thanks!

-Hamid

On Sep 6, 2017, at 5:04 PM, McCAndrew88 notifications@github.com wrote:

I can share it with you, what is your email?

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub, or mute the thread.

McCAndrew88 commented 7 years ago

You should have access to it now.

The JoystickEnclosureV2 is the one I modeled after what we have and you should be able to export an STL out of that.

V3 is the lower profile one, but the bottom tabs don't work well. The bottom still needs design tweaks.

https://cad.onshape.com/documents/4aca10982c02d999f4bbff8b/w/3f4c62dba35cde9e394a6221/e/2ed27eae5eff1055e6bc6cef

You can edit anything, just makes sure to make a new version.

Let me know if you have any questions!

On Wed, Sep 6, 2017 at 5:29 PM, badiozam notifications@github.com wrote:

Hey Andrew, It's my github username at yahoo. Thanks!

-Hamid

On Sep 6, 2017, at 5:04 PM, McCAndrew88 notifications@github.com wrote:

I can share it with you, what is your email?

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub, or mute the thread.

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub https://github.com/robomakery/pvc-powerchair/issues/35#issuecomment-327648317, or mute the thread https://github.com/notifications/unsubscribe-auth/ATplcjHTrTRT6f5_rFr4kv7NhwGV9PKJks5sfzjTgaJpZM4MvD4g .

-- Andrew McCarthy andrewmccarthy88@gmail.com | (408) 646-9550 Mechanical Engineering UCLA Class of 2013

badiozam commented 7 years ago

Awesome, thanks!

-Hamid

On Sep 7, 2017, at 8:37 AM, McCAndrew88 notifications@github.com wrote:

You should have access to it now.

The JoystickEnclosureV2 is the one I modeled after what we have and you should be able to export an STL out of that.

V3 is the lower profile one, but the bottom tabs don't work well. The bottom still needs design tweaks.

https://cad.onshape.com/documents/4aca10982c02d999f4bbff8b/w/3f4c62dba35cde9e394a6221/e/2ed27eae5eff1055e6bc6cef

You can edit anything, just makes sure to make a new version.

Let me know if you have any questions!

On Wed, Sep 6, 2017 at 5:29 PM, badiozam notifications@github.com wrote:

Hey Andrew, It's my github username at yahoo. Thanks!

-Hamid

On Sep 6, 2017, at 5:04 PM, McCAndrew88 notifications@github.com wrote:

I can share it with you, what is your email?

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub, or mute the thread.

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub https://github.com/robomakery/pvc-powerchair/issues/35#issuecomment-327648317, or mute the thread https://github.com/notifications/unsubscribe-auth/ATplcjHTrTRT6f5_rFr4kv7NhwGV9PKJks5sfzjTgaJpZM4MvD4g .

-- Andrew McCarthy andrewmccarthy88@gmail.com | (408) 646-9550 Mechanical Engineering UCLA Class of 2013 — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or mute the thread.

badiozam commented 7 years ago

I went ahead and pinted the part out and I was able to get it to fit onto a 1/2" PVC I had laying around. img_4665

However, for some reason the outer ring came out a little warped: img_4674 img_4673

I think I can get rid of it if I adjusted the support threshold in my slicer settings but I wanted to ask if you think it's acceptable as is.

dylanvaughn commented 7 years ago

Looks good to me!

On Fri, Sep 8, 2017 at 4:04 PM, badiozam notifications@github.com wrote:

I went ahead and pinted the part out and I was able to get it to fit onto a 1/2" PVC I had laying around. [image: img_4665] https://user-images.githubusercontent.com/30665499/30234107-0d015650-94af-11e7-8919-07d02d47c4b0.JPG

However, for some reason the outer ring came out a little warped: [image: img_4674] https://user-images.githubusercontent.com/30665499/30234106-0cff24a2-94af-11e7-930f-d340a529bda4.JPG [image: img_4673] https://user-images.githubusercontent.com/30665499/30234108-0d0437bc-94af-11e7-9545-21342828636d.JPG

I think I can get rid of it if I adjusted the support threshold in my slicer settings but I wanted to ask if you think it's acceptable as is.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/robomakery/pvc-powerchair/issues/35#issuecomment-328233510, or mute the thread https://github.com/notifications/unsubscribe-auth/AAA6PprsJsQKdshKYYbMEYOm_hH0lpCMks5sgcf_gaJpZM4MvD4g .