Feed Overrides doesn't work properly

robomechs / 6-AXIS-USBCNC-GRBL

This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl

195 stars 94 forks source link

Feed Overrides doesn't work properly #21

Open S2000Stefan opened 5 years ago

S2000Stefan commented 5 years ago

Hello, Feed Overrides doesn't work properly. Plus, minus 10 percent work well change to 20 percent freeze STM32 GRBL. Version "stm32grbl11_11122018" work well, later versions doesn't work. Greetings Stefan

creisey commented 4 years ago

i have the same. but the version you mention is no longer longer accessable, the latest i see is form 28.Dec 2018

S2000Stefan commented 4 years ago

Hello creisey, i am work on my 4 achses milling machine with this version from here with small changes: https://github.com/usbcnc/grbl/issues/51 https://github.com/usbcnc/grbl/files/2665286/stm32grbl11_11122018.zip It works ok for me. Greetings Stefan

creisey commented 4 years ago

thx a lot, ill try yours too