search

robopeak / rplidar_ros

BSD 2-Clause "Simplified" License
453 stars 370 forks source link

Can not start scan: 80008000! #95

Open Gowresh7 opened 5 years ago

Gowresh7 commented 5 years ago

I am using RPLiDAR A1 in Raspberry Pi 3B with ROS. I am getting this error when I launch the rplidar node with my launch file. How to rectify this error?

ghost commented 4 years ago

In my case ~this was due to faulty cables.~ it was because the mounting guidelines were not followed (we used bolts bigger than 4mm).

mdthabrez commented 1 year ago

@Gowresh7 i am also facing the same problem , did u solve yours . Please give a solution

Gowresh-MARC commented 1 year ago

So I identified the problem was primarily due to the inadequate power from the usb ports. Once I switched to a external powered usb hub, it was solved.

@Gowresh7 i am also facing the same problem , did u solve yours . Please give a solution

mdthabrez commented 1 year ago

i am making a raspberry pi + rplidar a1 based autonomous robot car. I am supplying a 5.15V to the raspberry pi through a 12V lipo battery but it still not working . How much volt would you recommend for the robot car using raspberry pi 3 b + rplidar a1m8 + arduino (as motor controlller) . both arduino and rplidar are powered by through the raspberry pi .

can u explain this "Once I switched to a external powered usb hub, it was solved." . I didnt get you ?