search

roboticlemon / cmd-robot

Automatically exported from code.google.com/p/cmd-robot
1 stars 1 forks source link

Secret power supplies #10

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What are they and please post results here!

Original issue reported on code.google.com by cian.by...@sydstu.catholic.edu.au on 13 Nov 2012 at 10:19

GoogleCodeExporter commented 9 years ago 
12V batteries with 4 in series and another couple of 9V batteries to provide a 
backbone!

Original comment by thomas.i...@sydstu.catholic.edu.au on 13 Nov 2012 at 10:28

GoogleCodeExporter commented 9 years ago 
Sounds good.

Original comment by cian.by...@sydstu.catholic.edu.au on 13 Nov 2012 at 11:20

GoogleCodeExporter commented 9 years ago 
Just changing to "Enhancement"

Original comment by cian.by...@sydstu.catholic.edu.au on 13 Nov 2012 at 9:30

GoogleCodeExporter commented 9 years ago 
Yep, good idea!

Original comment by hacker16...@gmail.com on 13 Nov 2012 at 10:27

GoogleCodeExporter commented 9 years ago 
Work on the schematics on Wednesday afternoon please.  We plan to have CMD 
robot one online and ready for testing on Friday P2.  I will tell Ethan this as 
soon as I can, hopefully tomorrow.  This applies to all areas of the project.

Note that we have IST on Thursday (P2) and Friday (P1 and P2).

Also note that we have a Maths exam on Wednesday that counts towards the HSC.  
This may cause the project to slow a bit so we will have to pick up the slack 
after this event on Wednesday afternoon.

Original comment by cian.by...@sydstu.catholic.edu.au on 18 Nov 2012 at 11:13

GoogleCodeExporter commented 9 years ago 
The power supplies have not progressed.  I can tell you though, it will go very 
fast off only 24 volts with the lantern batteries!

Original comment by cian.by...@sydstu.catholic.edu.au on 6 Dec 2012 at 10:57

GoogleCodeExporter commented 9 years ago 
We need to advance this part of the project to a higher priority, as it will 
affect the way we wire stuff up at a later date.

I have boosted this to a high priority.  It should just involve a Schematic of 
some sort of logic system. (Like a micro-processor.

It can use the 10A transistors with control through the binary-decimal chip - 
which ca be connected either to the Arduino or the raspberry pi through a 
python script which can then be incorporated into the TCP server.

I can do the rest if you just work on logic gate. 

Cian.

Original comment by cian.by...@sydstu.catholic.edu.au on 8 Dec 2012 at 11:47

GoogleCodeExporter commented 9 years ago 
The Schematic is on the Wiki I do believe.

Turbo mode should be low Proirity now that we are using 24volts standard (Very 
Fast)

Original comment by cian.by...@sydstu.catholic.edu.au on 13 Feb 2013 at 10:57

GoogleCodeExporter commented 9 years ago 
On board power schematic is drawn up kind of, I think we need to have one 
massive schematic which details the entire projects wiring config! :)

Original comment by cmdenterpriseshq on 4 Apr 2013 at 2:46