search

robotology / icub-tech-support

Virtual repository that provides support requests for individual robots
GNU General Public License v2.0
20 stars 1 forks source link

ergoCub 1.0 S/N:000 – Crane stop to work #1653

Closed lrapetti closed 8 months ago

lrapetti commented 9 months ago

Robot Name 🤖

ergoCub 1.0 S/N:000

Request/Failure description

I don't know if this is the right place to open this issue, but it seems that from time to time the crane stop to work. In particular, it is still able to open and close the legs, but it cannot be moved up and down.

In order to fix the issue either we unmount and mount back the upper part of the crane from the base, or we simply try to move a bit the pole without unmouting.

Detailed context

This happened for the first time at ICRA2023, and then it happened a few times in the lab (some of the people that experienced this issue @GiulioRomualdi @paolo-viceconte @mebbaid @isorrentino @fbiggi).

Additional context

No response

How does it affect you?

No response

lrapetti commented 9 months ago

Consider that the crane was bought less then a year ago, so it might be still in warranty.

AntonioConsilvio commented 9 months ago

cc @maggia80 @Fabrizio69

maggia80 commented 9 months ago

We are in contact with the supplier

GiulioRomualdi commented 9 months ago

We had to switch to the old crane since the new one is not working

sgiraz commented 8 months ago

Hi @GiulioRomualdi,

After the intervention of @fbiggi, the crane of ergoCub1.0 S/N:000 has been fixed! Closing.

GiulioRomualdi commented 8 months ago

Great! Thank you 😊