ergoCub 1.0 S/N:000 – Fault not working

robotology / icub-tech-support

Virtual repository that provides support requests for individual robots

GNU General Public License v2.0

20 stars 1 forks source link

ergoCub 1.0 S/N:000 – Fault not working #1661

Closed lrapetti closed 7 months ago

lrapetti commented 9 months ago

Robot Name 🤖

ergoCub 1.0 S/N:000

Request/Failure description

Fault did not work this afternoon (this morning was working). Since it was also noticed in https://github.com/robotology/icub-tech-support/issues/1633, and then it started working again without intervention, it is possible that it is the same issue that appears occasionally.

Detailed context

Noticed during the tests of @ale-git.

Additional context

No response

How does it affect you?

No response

github-actions[bot] commented 9 months ago

⚠️ Detected missing mandatory information

Hi @lrapetti 👋🏻

Some of the following points need your attention.

You are required to:

[x] enter the Robot Name.
[x] give the issue a meaningful Title.
[ ] provide a Detailed Context (at least 100 characters).

_{Please, mark the points above as solved once done.} [^1]: To get to know the allowed options for the dropdown fields, you may peruse the template.

sgiraz commented 8 months ago

After a F2F with @AntonioConsilvio it seems that the problem comes and goes at random. Actually the fault is working but We need to monitor the problem closely.

cc @AntonioAzocar @Gandoo @Fabrizio69 @AntonioConsilvio

AntonioConsilvio commented 7 months ago

Hi @lrapetti, since the opening of this issue, the problem hasn't been observed anymore I would proceed closing this issue.

If the problem will appear again, we will reopen it.

cc @sgiraz @Gandoo @Fabrizio69