Closed gabrielenava closed 1 month ago
Hi @gabrielenava, I tested the fault button and it seems to work properly.
Maybe you need to press harder when inserting!
Hi @gabrielenava! Have you tested if inserting the connector a little harder works properly?
hello! we did it today. First time the robot started with no issues. Second time we had issues at startup, similar to what reported above. But at this point I do not know if the problem is the fault button or it is yet another declination of https://github.com/robotology/icub-tech-support/issues/1799
if you prefer we can close this issue and keep https://github.com/robotology/icub-tech-support/issues/1799 open to investigate these startup issues.
Thank you for the feedback @gabrielenava! Closing!
Robot Name 🤖
iCubGenova09 (iRonCub3) S/N:000
Request/Failure description
The robot fault button does not work anymore
Detailed context
I was trying to start the robot, but it keeps failing with error "external fault button pressed". When I switched to another fault, the robot started with no issued
Additional context
Here is the faulty fault, in the robot kitchen close to the AMI area.
How does it affect you?
No response