Wazirri
commented
11 months ago While device booting dmesg gives those errors;
[ 3.161262] mpp_rkvenc fdf40000.rkvenc: Adding to iommu group 5 [ 3.161473] mpp_rkvenc fdf40000.rkvenc: probing start [ 3.161911] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage [ 3.161958] mpp_rkvenc fdf40000.rkvenc: pvtm = 88570, from nvmem [ 3.161968] mpp_rkvenc fdf40000.rkvenc: pvtm-volt-sel=1 [ 3.162097] mpp_rkvenc fdf40000.rkvenc: avs=0 [ 3.162193] mpp_rkvenc fdf40000.rkvenc: failed to find power_model node [ 3.162201] mpp_rkvenc fdf40000.rkvenc: failed to initialize power model [ 3.162206] mpp_rkvenc fdf40000.rkvenc: failed to get dynamic-coefficient [ 3.162590] mpp_rkvenc fdf40000.rkvenc: probing finish [ 3.162911] mpp_rkvdec2 fdf80200.rkvdec: Adding to iommu group 6 [ 3.163082] mpp_rkvdec2 fdf80200.rkvdec: rkvdec, probing start [ 3.163319] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found! [ 3.163327] rkvdec2_init:1022: No niu aclk reset resource define [ 3.163335] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found! [ 3.163339] rkvdec2_init:1025: No niu hclk reset resource define [ 3.163552] mpp_rkvdec2 fdf80200.rkvdec: leakage=70 [ 3.163563] mpp_rkvdec2 fdf80200.rkvdec: leakage-volt-sel=0 [ 3.163593] mpp_rkvdec2 fdf80200.rkvdec: pvtm = 88570, from nvmem [ 3.163602] mpp_rkvdec2 fdf80200.rkvdec: pvtm-volt-sel=1 [ 3.163727] mpp_rkvdec2 fdf80200.rkvdec: avs=0 [ 3.163809] mpp_rkvdec2 fdf80200.rkvdec: failed to find power_model node [ 3.163817] mpp_rkvdec2 fdf80200.rkvdec: failed to initialize power model [ 3.163822] mpp_rkvdec2 fdf80200.rkvdec: failed to get dynamic-coefficient [ 3.163909] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000 [ 3.163917] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000 [ 3.163923] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056 [ 3.163928] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536 [ 3.163934] mpp_rkvdec2 fdf80200.rkvdec: min_width 512 [ 3.163972] mpp_rkvdec2 fdf80200.rkvdec: link mode probe finish [ 3.164029] mpp_rkvdec2 fdf80200.rkvdec: probing finish
After sometimes our program works, rootfs crashing, and it does not boot again.
`DDR V1.16 6f71c736ce typ 23/03/02-20:01:48 In LP4/4x derate en, other dram:1x trefi ddrconfig:0 LP4 MR14:0x4d LPDDR4, 324MHz BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB tdqss: cs0 dqs0: 48ps, dqs1: -72ps, dqs2: -48ps, dqs3: -120ps,
change to: 324MHz PHY drv:clk:38,ca:38,DQ:30,odt:0 vrefinner:41%, vrefout:41% dram drv:40,odt:0 clk skew:0x61
change to: 528MHz PHY drv:clk:38,ca:38,DQ:30,odt:0 vrefinner:41%, vrefout:41% dram drv:40,odt:0 clk skew:0x58
change to: 780MHz PHY drv:clk:38,ca:38,DQ:30,odt:0 vrefinner:41%, vrefout:41% dram drv:40,odt:0 clk skew:0x58
change to: 1560MHz(final freq) PHY drv:clk:38,ca:38,DQ:30,odt:60 vrefinner:16%, vrefout:29% dram drv:40,odt:80 vref_ca:00000068 clk skew:0x1c cs 0: the read training result: DQS0:0x37, DQS1:0x2d, DQS2:0x33, DQS3:0x33, min :0x13 0x13 0x14 0xe 0x2 0x7 0xa 0xe , 0x3 0x2 0xa 0x5 0xa 0x7 0xd 0x5 , 0x4 0x6 0x7 0x1 0x5 0x8 0x8 0x9 , 0xd 0x8 0x6 0x0 0x14 0x16 0x11 0x12 , mid :0x2b 0x2b 0x2d 0x26 0x1a 0x1e 0x24 0x24 ,0x1a 0x1a 0x1c 0x1d 0x1e 0x1c 0x22 0x1e , 0x1b 0x1b 0x21 0x17 0x1e 0x1f 0x1f 0x22 ,0x23 0x20 0x1d 0x1a 0x2c 0x2e 0x27 0x2b , max :0x43 0x44 0x46 0x3e 0x33 0x35 0x3f 0x3b ,0x32 0x32 0x2f 0x36 0x32 0x32 0x37 0x38 , 0x33 0x30 0x3b 0x2d 0x38 0x36 0x36 0x3c ,0x39 0x39 0x35 0x35 0x45 0x46 0x3e 0x44 , range:0x30 0x31 0x32 0x30 0x31 0x2e 0x35 0x2d ,0x2f 0x30 0x25 0x31 0x28 0x2b 0x2a 0x33 , 0x2f 0x2a 0x34 0x2c 0x33 0x2e 0x2e 0x33 ,0x2c 0x31 0x2f 0x35 0x31 0x30 0x2d 0x32 , the write training result: DQS0:0x25, DQS1:0xe, DQS2:0x13, DQS3:0x5, min :0x6a 0x6e 0x70 0x6b 0x5d 0x60 0x67 0x6c 0x6d ,0x4f 0x53 0x57 0x57 0x57 0x59 0x5b 0x57 0x54 , 0x4f 0x52 0x52 0x4e 0x51 0x53 0x54 0x59 0x56 ,0x48 0x47 0x42 0x44 0x54 0x54 0x50 0x52 0x4a , mid :0x85 0x88 0x89 0x85 0x76 0x79 0x7f 0x85 0x86 ,0x6a 0x6c 0x6f 0x71 0x6f 0x70 0x73 0x71 0x6d , 0x69 0x6c 0x6b 0x68 0x6a 0x6c 0x6c 0x72 0x6f ,0x62 0x60 0x5b 0x5d 0x6d 0x6d 0x67 0x6c 0x61 , max :0xa1 0xa3 0xa3 0x9f 0x8f 0x92 0x98 0x9f 0x9f ,0x86 0x85 0x88 0x8c 0x87 0x88 0x8c 0x8b 0x87 , 0x84 0x87 0x85 0x83 0x84 0x86 0x84 0x8c 0x89 ,0x7d 0x79 0x74 0x77 0x86 0x87 0x7f 0x86 0x79 , range:0x37 0x35 0x33 0x34 0x32 0x32 0x31 0x33 0x32 ,0x37 0x32 0x31 0x35 0x30 0x2f 0x31 0x34 0x33 , 0x35 0x35 0x33 0x35 0x33 0x33 0x30 0x33 0x33 ,0x35 0x32 0x32 0x33 0x32 0x33 0x2f 0x34 0x2f , CA Training result: cs:0 min :0x48 0x41 0x40 0x36 0x3d 0x33 0x40 ,0x44 0x3d 0x40 0x36 0x3c 0x31 0x40 , cs:0 mid :0x83 0x82 0x7c 0x75 0x78 0x73 0x6c ,0x81 0x7e 0x7b 0x76 0x76 0x71 0x6b , cs:0 max :0xbf 0xc3 0xb8 0xb5 0xb3 0xb3 0x98 ,0xbf 0xbf 0xb6 0xb7 0xb0 0xb1 0x96 , cs:0 range:0x77 0x82 0x78 0x7f 0x76 0x80 0x58 ,0x7b 0x82 0x76 0x81 0x74 0x80 0x56 , out U-Boot SPL board init U-Boot SPL 2017.09-gaaca6ffec1-211203 #zzz (Dec 03 2021 - 18:42:16) unknown raw ID phN unrecognized JEDEC id bytes: 00, 00, 00 Trying to boot from MMC2 MMC error: The cmd index is 1, ret is -110 Card did not respond to voltage select! mmc_init: -95, time 9 spl: mmc init failed with error: -95 Trying to boot from MMC1 SPL: A/B-slot: _a, successful: 0, tries-remain: 7 Trying fit image at 0x4000 sector
Verified-boot: 0
Checking atf-1 0x00040000 ... sha256(46056a42ac...) + OK
Checking uboot 0x00a00000 ... sha256(08cde1eafc...) + OK
Checking fdt 0x00b3e4d0 ... sha256(036cca5880...) + OK
Checking atf-2 0xfdcc1000 ... sha256(ad4de01352...) + OK
Checking atf-3 0x0006c000 ... sha256(ef78ee421f...) + OK
Checking atf-4 0xfdcce000 ... sha256(b5bb2ac66f...) + OK
Checking atf-5 0xfdcd0000 ... sha256(ba42c3abc6...) + OK
Checking atf-6 0x0006a000 ... sha256(6ede7a3b44...) + OK
Checking optee 0x08400000 ... sha256(af414b9c9f...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000) Total: 237.372 ms
INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-594-g7f859117f:cl NOTICE: BL31: Built : 04:51:16, May 11 2023 INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: pmu v1 is valid 220114 INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 I/TC: I/TC: OP-TEE version: 3.13.0-651-gd84087907 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 Fri Sep 16 15:39:33 CST 2022 aarch64 I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9
U-Boot 2017.09 (Oct 03 2023 - 14:32:29 +0300)
Model: Rockchip RK3568 Evaluation Board MPIDR: 0x81000000 PreSerial: 2, raw, 0xfe660000 DRAM: 2 GiB Sysmem: init Relocation Offset: 7d221000 Relocation fdt: 7b9f91a8 - 7b9fecd8 CR: M/C/I Using default environment
DM: v1 dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0 Bootdev(atags): mmc 0 MMC0: HS200, 200Mhz PartType: EFI boot mode: None FIT: no signed, no conf required RESC: 'boot', blk@0x00019390 DTB: rk-kernel.dtb HASH(c): OK I2c0 speed: 100000Hz PMIC: RK8090 (on=0x40, off=0x00) vdd_logic init 900000 uV vdd_gpu init 900000 uV vdd_npu init 900000 uV io-domain: OK INFO: ddr dmc_fsp already initialized in loader. Could not find baseparameter partition Model: Rockchip RK3568 EVB2 LP4X V10 Board MPIDR: 0x81000000 Rockchip UBOOT DRM driver version: v1.0.1 VOP have 2 active VP vp0 have layer nr:3[1 3 5 ], primary plane: 5 vp1 have layer nr:3[0 2 4 ], primary plane: 4 vp2 have layer nr:0[], primary plane: 0 xfer: num: 2, addr: 0x50 xfer: num: 2, addr: 0x50 Monitor has basic audio support Could not find baseparameter partition mode:1280x720 hdmi@fe0a0000: detailed mode clock 74250 kHz, flags[5] H: 1280 1390 1430 1650 V: 0720 0725 0730 0750 bus_format: 2025 VOP update mode to: 1280x720p60, type: HDMI0 for VP0 VP0 set crtc_clock to 74000KHz VOP VP0 enable Smart1[654x270->654x270@313x225] fmt[1] addr[0x7df82000] CEA mode used vic=4 final pixclk = 74000000 tmdsclk = 74000000 PHY powered down in 0 iterations PHY PLL locked 1 iterations PHY powered down in 1 iterations PHY PLL locked 1 iterations sink has audio support Rate 74000000 missing; compute N dynamically hdmi_set_clk_regenerator: fs=48000Hz ftdms=74.000MHz N=6144 cts=74000 Using display timing dts lvds: detailed mode clock 68000 kHz, flags[a] H: 1280 1298 1308 1408 V: 0800 0806 0808 0816 bus_format: 100a VOP update mode to: 1280x800p59, type: LVDS0 for VP1 VP1 set crtc_clock to 68000KHz VOP VP1 enable Smart0[654x270->654x270@313x265] fmt[1] addr[0x7df82000] CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 1104000 KHz dpll 780000 KHz gpll 1188000 KHz cpll 1000000 KHz npll 1200000 KHz vpll 612000 KHz hpll 74000 KHz ppll 200000 KHz armclk 1104000 KHz aclk_bus 150000 KHz pclk_bus 100000 KHz aclk_top_high 500000 KHz aclk_top_low 400000 KHz hclk_top 150000 KHz pclk_top 100000 KHz aclk_perimid 300000 KHz hclk_perimid 150000 KHz pclk_pmu 100000 KHz Net: eth1: ethernet@fe010000, eth0: ethernet@fe2a0000 Hit key to stop autoboot('CTRL+C'): 0 ANDROID: reboot reason: "(none)" optee api revision: 2.0 TEEC: Waring: Could not find security partition Not AVB images, AVB skip No valid android hdr Android image load failed Android boot failed, error -1.
Booting FIT Image at 0x79586180 with size 0x02272000
Fdt Ramdisk skip relocation
Loading kernel from FIT Image at 79586180 ...
Using 'conf' configuration
Verified-boot: 0
Trying 'kernel' kernel subimage Description: unavailable Type: Kernel Image Compression: uncompressed Data Start: 0x795a0780 Data Size: 36010496 Bytes = 34.3 MiB Architecture: AArch64 OS: Linux Load Address: 0x00280000 Entry Point: 0x00280000 Hash algo: sha256 Hash value: 845496393292dd1e21b5a86fb6aa16c919a73c9bd57e30e6896dbd996e0395de Verifying Hash Integrity ... sha256+ OK
Loading fdt from FIT Image at 79586180 ...
Using 'conf' configuration Trying 'fdt' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x79586980 Data Size: 105585 Bytes = 103.1 KiB Architecture: AArch64 Load Address: 0x08300000 Hash algo: sha256 Hash value: 02f9f4088bca741744ba321c062c1fd76731123fd00fa91e43372dccf30758a8 Verifying Hash Integrity ... sha256+ OK Loading fdt from 0x08300000 to 0x08300000 Booting using the fdt blob at 0x08300000 Loading Kernel Image from 0x795a0780 to 0x00280000 ... OK kernel loaded at 0x00280000, end = 0x024d7a00 Using Device Tree in place at 0000000008300000, end 000000000831cc70 vp0, plane_mask:0x2a, primary-id:5, curser-id:-1 vp1, plane_mask:0x15, primary-id:4, curser-id:-1 vp2, plane_mask:0x0, primary-id:0, curser-id:-1 WARNING: could not set reg FDT_ERR_BADOFFSET.
reserved-memory:
drm-logo@00000000: addr=7df00000 size=208000 drm-cubic-lut@00000000: addr=7ff00000 size=8000 ramoops@110000: addr=110000 size=f0000 Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0x80000000 (size: 0x76c00000) == DO RELOCATE == Kernel from 0x00280000 to 0x00200000 Total: 1034.561/1098.449 ms
Starting kernel ...
[ 1.103387] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 1.103409] Linux version 5.10.160 (root@smarteq-H470M-K) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #3 SMP Tue Oct 3 14:32:45 +03 2023
[ 1.107415] Machine model: Rockchip RK3568 EVB2 LP4X V10 Board
[ 1.107477] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[ 1.111774] printk: bootconsole [uart8250] enabled
[ 1.113141] efi: UEFI not found.
[ 1.147748] Zone ranges:
[ 1.148002] DMA [mem 0x0000000000200000-0x000000007fffffff]
[ 1.148590] DMA32 empty
[ 1.148865] Normal empty
[ 1.149139] Movable zone start for each node
[ 1.149541] Early memory node ranges
[ 1.149879] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 1.150471] node 0: [mem 0x0000000009400000-0x000000007fffffff]
[ 1.151065] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 1.166243] cma: Reserved 16 MiB at 0x000000007e800000
[ 1.166816] psci: probing for conduit method from DT.
[ 1.167302] psci: PSCIv1.1 detected in firmware.
[ 1.167739] psci: Using standard PSCI v0.2 function IDs
[ 1.168235] psci: Trusted OS migration not required
[ 1.168698] psci: SMC Calling Convention v1.2
[ 1.169493] percpu: Embedded 30 pages/cpu s83480 r8192 d31208 u122880
[ 1.170215] Detected VIPT I-cache on CPU0
[ 1.170637] CPU features: detected: GIC system register CPU interface
[ 1.171244] CPU features: detected: Virtualization Host Extensions
[ 1.171832] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 1.172498] alternatives: patching kernel code
[ 1.174813] Built 1 zonelists, mobility grouping on. Total pages: 511496
[ 1.175461] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000
[ 1.178132] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 1.179117] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.179850] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 1.205877] Memory: 1983448K/2078720K available (18880K kernel code, 3422K rwdata, 6020K rodata, 6720K init, 525K bss, 78888K reserved, 16384K cma-reserved)
[ 1.207318] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 1.207965] ftrace: allocating 56789 entries in 222 pages
[ 1.285247] ftrace: allocated 222 pages with 6 groups
[ 1.286048] rcu: Hierarchical RCU implementation.
[ 1.286500] rcu: RCU event tracing is enabled.
[ 1.286930] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 1.287546] Rude variant of Tasks RCU enabled.
[ 1.287974] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 1.288687] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 1.293777] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 1.295525] GICv3: GIC: Using split EOI/Deactivate mode
[ 1.296028] GICv3: 320 SPIs implemented
[ 1.296391] GICv3: 0 Extended SPIs implemented
[ 1.296842] GICv3: Distributor has no Range Selector support
[ 1.297383] GICv3: 16 PPIs implemented
[ 1.297773] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[ 1.298534] ITS [mem 0xfd440000-0xfd45ffff]
[ 1.299002] ITS@0x00000000fd440000: allocated 8192 Devices @29d0000 (indirect, esz 8, psz 64K, shr 0)
[ 1.299900] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @29e0000 (flat, esz 2, psz 64K, shr 0)
[ 1.300862] ITS: using cache flushing for cmd queue
[ 1.301592] GICv3: using LPI property table @0x00000000029f0000
[ 1.302261] GIC: using cache flushing for LPI property table
[ 1.302799] GICv3: CPU0: using allocated LPI pending table @0x0000000002a00000
[ 1.332186] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 1.332775] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 1.333796] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 1.335354] Console: colour dummy device 80x25
[ 1.335805] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 1.336778] pid_max: default: 32768 minimum: 301
[ 1.337334] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 1.338040] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 1.340188] rcu: Hierarchical SRCU implementation.
[ 1.341358] Platform MSI: interrupt-controller@fd440000 domain created
[ 1.342375] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[ 1.343416] EFI services will not be available.
[ 1.344176] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[ 1.345888] Detected VIPT I-cache on CPU1
[ 1.345921] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[ 1.345939] GICv3: CPU1: using allocated LPI pending table @0x0000000002a10000
[ 1.345992] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 1.347333] Detected VIPT I-cache on CPU2
[ 1.347360] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[ 1.347375] GICv3: CPU2: using allocated LPI pending table @0x0000000002a20000
[ 1.347413] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 1.348701] Detected VIPT I-cache on CPU3
[ 1.348725] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[ 1.348740] GICv3: CPU3: using allocated LPI pending table @0x0000000002a30000
[ 1.348775] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 1.348870] smp: Brought up 1 node, 4 CPUs
[ 1.356289] SMP: Total of 4 processors activated.
[ 1.356742] CPU features: detected: Privileged Access Never
[ 1.357267] CPU features: detected: User Access Override
[ 1.357769] CPU features: detected: 32-bit EL0 Support
[ 1.358254] CPU features: detected: Common not Private translations
[ 1.358844] CPU features: detected: RAS Extension Support
[ 1.359353] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 1.360170] CPU features: detected: CRC32 instructions
[ 1.360655] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 1.361313] CPU features: detected: RCpc load-acquire (LDAPR)
[ 1.361927] CPU: All CPU(s) started at EL2
[ 1.363313] devtmpfs: initialized
[ 1.376968] Registered cp15_barrier emulation handler
[ 1.377507] Registered setend emulation handler
[ 1.378096] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 1.379024] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 1.380150] pinctrl core: initialized pinctrl subsystem
[ 1.381211] DMI not present or invalid.
[ 1.381971] NET: Registered protocol family 16
[ 1.383986] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 1.384808] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 1.387287] Registered FIQ tty driver
[ 1.387965] thermal_sys: Registered thermal governor 'fair_share'
[ 1.387969] thermal_sys: Registered thermal governor 'step_wise'
[ 1.388546] thermal_sys: Registered thermal governor 'user_space'
[ 1.389112] thermal_sys: Registered thermal governor 'power_allocator'
[ 1.389914] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 1.391353] cpuidle: using governor menu
[ 1.391960] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 1.392724] ASID allocator initialised with 65536 entries
[ 1.395307] ramoops: dmesg-0 0x20000@0x0000000000110000
[ 1.395826] ramoops: console 0x80000@0x0000000000130000
[ 1.396335] ramoops: pmsg 0x50000@0x00000000001b0000
[ 1.397141] printk: console [ramoops-1] enabled
[ 1.397572] pstore: Registered ramoops as persistent store backend
[ 1.398172] ramoops: using 0xf0000@0x110000, ecc: 0
[ 1.430667] rockchip-gpio fdd60000.gpio0: probed /pinctrl/gpio0@fdd60000
[ 1.431800] rockchip-gpio fe740000.gpio1: probed /pinctrl/gpio1@fe740000
[ 1.432906] rockchip-gpio fe750000.gpio2: probed /pinctrl/gpio2@fe750000
[ 1.433956] rockchip-gpio fe760000.gpio3: probed /pinctrl/gpio3@fe760000
[ 1.435014] rockchip-gpio fe770000.gpio4: probed /pinctrl/gpio4@fe770000
[ 1.435731] rockchip-pinctrl pinctrl: probed pinctrl
[ 1.455681] fiq_debugger fiq_debugger.0: IRQ fiq not found
[ 1.456265] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[ 1.456819] fiq_debugger_probe: could not install nmi irq handler
[[ 1.457483] printk: console [ttyFIQ0] enabled
1.457483] printk: console [ttyFIQ0] enabled
[ 1.458284] printk: bootconsole [uart8250] disabled
[ 1.458284] printk: bootconsole [uart8250] disabled
[ 1.458922] Registered fiq debugger ttyFIQ0
[ 1.459675] vcc3v3_sys: supplied by dc_12v
[ 1.459959] vcc5v0_sys: supplied by dc_12v
[ 1.460212] vcc5v0_usb: supplied by dc_12v
[ 1.460600] vcc5v0_host: supplied by vcc5v0_usb
[ 1.461058] vcc5v0_otg: supplied by vcc5v0_usb
[ 1.461784] vcc2v5-sys: supplied by vcc3v3_sys
[ 1.462038] vcc3v3_bu: supplied by vcc5v0_sys
[ 1.463312] iommu: Default domain type: Translated
[ 1.466762] SCSI subsystem initialized
[ 1.466984] usbcore: registered new interface driver usbfs
[ 1.467035] usbcore: registered new interface driver hub
[ 1.467074] usbcore: registered new device driver usb
[ 1.467157] mc: Linux media interface: v0.10
[ 1.467189] videodev: Linux video capture interface: v2.00
[ 1.467256] pps_core: LinuxPPS API ver. 1 registered
[ 1.467265] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 1.467282] PTP clock support registered
[ 1.467932] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 1.467996] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 1.470085] Advanced Linux Sound Architecture Driver Initialized.
[ 1.470490] Bluetooth: Core ver 2.22
[ 1.470527] NET: Registered protocol family 31
[ 1.470535] Bluetooth: HCI device and connection manager initialized
[ 1.470548] Bluetooth: HCI socket layer initialized
[ 1.470558] Bluetooth: L2CAP socket layer initialized
[ 1.470576] Bluetooth: SCO socket layer initialized
[ 1.471029] rockchip-cpuinfo cpuinfo: SoC : 35682000
[ 1.471041] rockchip-cpuinfo cpuinfo: Serial : b9eccb09f0fb56c8
[ 1.471749] clocksource: Switched to clocksource arch_sys_counter
[ 1.894827] NET: Registered protocol family 2
[ 1.895037] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.896172] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 1.896219] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 1.896307] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 1.896513] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.896632] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.896666] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.896827] NET: Registered protocol family 1
[ 1.897290] RPC: Registered named UNIX socket transport module.
[ 1.897301] RPC: Registered udp transport module.
[ 1.897307] RPC: Registered tcp transport module.
[ 1.897313] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.898232] PCI: CLS 0 bytes, default 64
[ 1.900541] rockchip-thermal fe710000.tsadc: tsadc is probed successfully!
[ 1.901494] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[ 1.906146] Initialise system trusted keyrings
[ 1.906337] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 1.910068] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.910595] NFS: Registering the id_resolver key type
[ 1.910629] Key type id_resolver registered
[ 1.910637] Key type id_legacy registered
[ 1.910668] ntfs: driver 2.1.32 [Flags: R/O].
[ 1.910851] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 1.911090] fuse: init (API version 7.32)
[ 1.911374] SGI XFS with security attributes, no debug enabled
[ 1.941808] NET: Registered protocol family 38
[ 1.941839] Key type asymmetric registered
[ 1.941849] Asymmetric key parser 'x509' registered
[ 1.941896] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 1.941907] io scheduler mq-deadline registered
[ 1.941915] io scheduler kyber registered
[ 1.942570] rockchip-csi2-dphy-hw fe870000.csi2-dphy-hw: csi2 dphy hw probe successfully!
[ 1.943341] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[ 1.954015] pwm-backlight backlight: supply power not found, using dummy regulator
[ 1.954650] iep: Module initialized.
[ 1.954713] mpp_service mpp-srv: unknown mpp version for missing VCS info
[ 1.954724] mpp_service mpp-srv: probe start
[ 1.956640] mpp_vdpu2 fdea0400.vdpu: Adding to iommu group 1
[ 1.956839] mpp_vdpu2 fdea0400.vdpu: probe device
[ 1.957328] mpp_vdpu2 fdea0400.vdpu: probing finish
[ 1.957819] mpp_vepu2 fdee0000.vepu: Adding to iommu group 3
[ 1.958000] mpp_vepu2 fdee0000.vepu: probing start
[ 1.958458] mpp_vepu2 fdee0000.vepu: probing finish
[ 1.959047] mpp-iep2 fdef0000.iep: Adding to iommu group 4
[ 1.959224] mpp-iep2 fdef0000.iep: probe device
[ 1.959483] mpp-iep2 fdef0000.iep: allocate roi buffer failed
[ 1.959703] mpp-iep2 fdef0000.iep: probing finish
[ 1.960167] mpp_jpgdec fded0000.jpegd: Adding to iommu group 2
[ 1.960334] mpp_jpgdec fded0000.jpegd: probe device
[ 1.960785] mpp_jpgdec fded0000.jpegd: probing finish
[ 1.962155] mpp_service mpp-srv: probe success
[ 1.966463] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
[ 1.966503] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 1.968272] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
[ 1.968299] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 1.969187] rockchip-pvtm fde00000.pvtm: pvtm@0 probed
[ 1.969324] rockchip-pvtm fde80000.pvtm: pvtm@1 probed
[ 1.969452] rockchip-pvtm fde90000.pvtm: pvtm@2 probed
[ 1.970094] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 1.970682] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[ 1.970942] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 1.971629] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 26, base_baud = 1500000) is a 16550A
[ 1.972320] fe680000.serial: ttyS4 at MMIO 0xfe680000 (irq = 72, base_baud = 1500000) is a 16550A
[ 1.972914] fe690000.serial: ttyS5 at MMIO 0xfe690000 (irq = 73, base_baud = 1500000) is a 16550A
[ 1.975344] random: crng init done
[ 1.975941] rockchip-vop2 fe040000.vop: Adding to iommu group 8
[ 1.983499] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x2a, primary plane phy id: 5
[ 1.983544] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x15, primary plane phy id: 4
[ 1.983556] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
[ 1.983809] [drm] failed to init overlay plane Cluster0-win1
[ 1.983856] [drm] failed to init overlay plane Cluster1-win1
[ 1.983987] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffffc00937de90)
[ 1.990320] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.990985] brd: module loaded
[ 1.995651] loop: module loaded
[ 1.996013] zram: Added device: zram0
[ 1.996232] lkdtm: No crash points registered, enable through debugfs
[ 1.996781] Add GPIO driver for liu.
[ 2.106838] usb2_reset-value=1
[ 2.106919] sata_power-value=1
[ 2.107054] pcie_power-value=1
[ 2.217154] pcie_PERSTn-value=0
[ 2.217189] rs485_ctrl-value=1
[ 2.219166] ahci fc000000.sata: supply ahci not found, using dummy regulator
[ 2.219323] ahci fc000000.sata: supply phy not found, using dummy regulator
[ 2.219447] ahci fc000000.sata: supply target not found, using dummy regulator
[ 2.219579] ahci fc000000.sata: forcing port_map 0x0 -> 0x1
[ 2.219622] ahci fc000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 2.219635] ahci fc000000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
[ 2.219658] ahci fc000000.sata: port 0 is not capable of FBS
[ 2.220591] scsi host0: ahci
[ 2.220858] ata1: SATA max UDMA/133 mmio [mem 0xfc000000-0xfc000fff] port 0x100 irq 19
[ 2.221089] ahci fc800000.sata: supply ahci not found, using dummy regulator
[ 2.221211] ahci fc800000.sata: supply phy not found, using dummy regulator
[ 2.221351] ahci fc800000.sata: supply target not found, using dummy regulator
[ 2.221483] ahci fc800000.sata: forcing port_map 0x0 -> 0x1
[ 2.221523] ahci fc800000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 2.221536] ahci fc800000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
[ 2.221548] ahci fc800000.sata: port 0 is not capable of FBS
[ 2.222396] scsi host1: ahci
[ 2.222592] ata2: SATA max UDMA/133 mmio [mem 0xfc800000-0xfc800fff] port 0x100 irq 20
[ 2.224258] rockchip-spi fe610000.spi: no high_speed pinctrl state
[ 2.224880] rockchip-spi fe610000.spi: probed, poll=0, rsd=0
[ 2.225272] rockchip-spi fe630000.spi: no high_speed pinctrl state
[ 2.225828] rockchip-spi fe630000.spi: probed, poll=0, rsd=0
[ 2.226572] wireguard: allowedips self-tests: pass
[ 2.231012] wireguard: nonce counter self-tests: pass
[ 2.392894] wireguard: ratelimiter self-tests: pass
[ 2.393145] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 2.393156] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 2.393892] tun: Universal TUN/TAP device driver, 1.6
[ 2.394104] CAN device driver interface
[ 2.396617] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
[ 2.396845] rk_gmac-dwmac fe010000.ethernet: no regulator found
[ 2.396858] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
[ 2.396868] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
[ 2.396877] rk_gmac-dwmac fe010000.ethernet: RX delay(0x26).
[ 2.396890] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[ 2.396925] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
[ 2.397167] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[ 2.397376] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 2.397389] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
[ 2.397400] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
[ 2.397408] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
[ 2.397414] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[ 2.397421] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[ 2.397482] rk_gmac-dwmac fe010000.ethernet: TSO supported
[ 2.397491] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.397498] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[ 2.397507] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
[ 2.531114] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found
[ 2.531365] rk_gmac-dwmac fe2a0000.ethernet: no regulator found
[ 2.531378] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (input).
[ 2.531388] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c).
[ 2.531397] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f).
[ 2.531409] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
[ 2.531439] rk_gmac-dwmac fe2a0000.ethernet: clock input from PHY
[ 2.531680] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII
[ 2.531899] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 2.531913] rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5
[ 2.531924] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported
[ 2.531931] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported
[ 2.531938] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
[ 2.531945] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
[ 2.532005] rk_gmac-dwmac fe2a0000.ethernet: TSO supported
[ 2.532014] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.532021] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
[ 2.532030] rk_gmac-dwmac fe2a0000.ethernet: Using 32 bits DMA width
[ 2.534813] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.534819] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.667624] PPP generic driver version 2.4.2
[ 2.667827] PPP BSD Compression module registered
[ 2.667838] PPP Deflate Compression module registered
[ 2.667861] PPP MPPE Compression module registered
[ 2.667869] NET: Registered protocol family 24
[ 2.667961] usbcore: registered new interface driver rtl8150
[ 2.667999] usbcore: registered new interface driver r8152
[ 2.668033] usbcore: registered new interface driver asix
[ 2.668073] usbcore: registered new interface driver ax88179_178a
[ 2.668112] usbcore: registered new interface driver cdc_ether
[ 2.668147] usbcore: registered new interface driver net1080
[ 2.668182] usbcore: registered new interface driver cdc_subset
[ 2.668215] usbcore: registered new interface driver zaurus
[ 2.668264] usbcore: registered new interface driver cdc_ncm
[ 2.668301] usbcore: registered new interface driver qmi_wwan
[ 2.669872] naneng-combphy fe820000.phy: phy type select 4 overwriting type 1
[ 2.679893] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.679939] ehci-pci: EHCI PCI platform driver
[ 2.680017] ehci-platform: EHCI generic platform driver
[ 2.680524] phy phy-fe8b0000.usb2-phy.4: illegal mode
[ 2.682570] ehci-platform fd800000.usb: EHCI Host Controller
[ 2.682740] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
[ 2.682867] ehci-platform fd800000.usb: irq 21, io mem 0xfd800000
[ 2.695096] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[ 2.695296] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 2.695307] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.695315] usb usb1: Product: EHCI Host Controller
[ 2.695322] usb usb1: Manufacturer: Linux 5.10.160 ehci_hcd
[ 2.695329] usb usb1: SerialNumber: fd800000.usb
[ 2.695746] hub 1-0:1.0: USB hub found
[ 2.695790] hub 1-0:1.0: 1 port detected
[ 2.698463] ehci-platform fd880000.usb: EHCI Host Controller
[ 2.698632] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
[ 2.698744] ehci-platform fd880000.usb: irq 23, io mem 0xfd880000
[ 2.711771] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[ 2.711959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 2.711971] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.711980] usb usb2: Product: EHCI Host Controller
[ 2.711987] usb usb2: Manufacturer: Linux 5.10.160 ehci_hcd
[ 2.711994] usb usb2: SerialNumber: fd880000.usb
[ 2.712356] hub 2-0:1.0: USB hub found
[ 2.712395] hub 2-0:1.0: 1 port detected
[ 2.713060] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.713086] ohci-platform: OHCI generic platform driver
[ 2.713382] phy phy-fe8b0000.usb2-phy.4: illegal mode
[ 2.713404] ohci-platform fd840000.usb: Generic Platform OHCI controller
[ 2.713563] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
[ 2.713669] ohci-platform fd840000.usb: irq 22, io mem 0xfd840000
[ 2.772581] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 2.772601] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.772610] usb usb3: Product: Generic Platform OHCI controller
[ 2.772617] usb usb3: Manufacturer: Linux 5.10.160 ohci_hcd
[ 2.772624] usb usb3: SerialNumber: fd840000.usb
[ 2.773008] hub 3-0:1.0: USB hub found
[ 2.773051] hub 3-0:1.0: 1 port detected
[ 2.773557] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[ 2.773712] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
[ 2.773826] ohci-platform fd8c0000.usb: irq 24, io mem 0xfd8c0000
[ 2.832579] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 2.832597] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.832606] usb usb4: Product: Generic Platform OHCI controller
[ 2.832613] usb usb4: Manufacturer: Linux 5.10.160 ohci_hcd
[ 2.832620] usb usb4: SerialNumber: fd8c0000.usb
[ 2.832990] hub 4-0:1.0: USB hub found
[ 2.833026] hub 4-0:1.0: 1 port detected
[ 2.834252] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.834471] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 2.834601] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010
[ 2.834662] xhci-hcd xhci-hcd.0.auto: irq 86, io mem 0xfd000000
[ 2.834917] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 2.834929] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.834937] usb usb5: Product: xHCI Host Controller
[ 2.834944] usb usb5: Manufacturer: Linux 5.10.160 xhci-hcd
[ 2.834950] usb usb5: SerialNumber: xhci-hcd.0.auto
[ 2.835374] hub 5-0:1.0: USB hub found
[ 2.835414] hub 5-0:1.0: 1 port detected
[ 2.835707] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.835853] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 2.835872] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.835936] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.836054] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 2.836065] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.836073] usb usb6: Product: xHCI Host Controller
[ 2.836080] usb usb6: Manufacturer: Linux 5.10.160 xhci-hcd
[ 2.836086] usb usb6: SerialNumber: xhci-hcd.0.auto
[ 2.836430] hub 6-0:1.0: USB hub found
[ 2.836467] hub 6-0:1.0: 1 port detected
[ 2.836881] usbcore: registered new interface driver cdc_acm
[ 2.836892] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.836941] usbcore: registered new interface driver cdc_wdm
[ 2.837183] usbcore: registered new interface driver uas
[ 2.837267] usbcore: registered new interface driver usb-storage
[ 2.837351] usbcore: registered new interface driver usbserial_generic
[ 2.837376] usbserial: USB Serial support registered for generic
[ 2.837423] usbcore: registered new interface driver cp210x
[ 2.837445] usbserial: USB Serial support registered for cp210x
[ 2.837503] usbcore: registered new interface driver ftdi_sio
[ 2.837525] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.837641] usbcore: registered new interface driver keyspan
[ 2.837664] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 2.837684] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 2.837704] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 2.837728] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 2.837772] usbcore: registered new interface driver option
[ 2.837797] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.837949] usbcore: registered new interface driver oti6858
[ 2.837971] usbserial: USB Serial support registered for oti6858
[ 2.838012] usbcore: registered new interface driver pl2303
[ 2.838033] usbserial: USB Serial support registered for pl2303
[ 2.838079] usbcore: registered new interface driver qcserial
[ 2.838101] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.838158] usbcore: registered new interface driver sierra
[ 2.838180] usbserial: USB Serial support registered for Sierra USB modem
[ 2.839543] usbcore: registered new interface driver usbtouchscreen
[ 2.839865] .. rk pwm remotectl v2.0 init
[ 2.840088] input: fdd70030.pwm as /devices/platform/fdd70030.pwm/input/input0
[ 2.840449] remotectl-pwm fdd70030.pwm: pwm version is 0x2130000
[ 2.840503] remotectl-pwm fdd70030.pwm: Controller support pwrkey capture
[ 2.841048] i2c /dev entries driver
[ 2.842940] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[ 2.845629] vdd_cpu: supplied by vcc5v0_sys
[ 2.852078] rk808 0-0020: chip id: 0x8090
[ 2.852132] rk808 0-0020: No cache defaults, reading back from HW
[ 2.875833] rk808 0-0020: source: on=0x40, off=0x00
[ 2.875859] rk808 0-0020: support dcdc3 fb mode:-22, 1
[ 2.875871] rk808 0-0020: support pmic reset mode:0,0
[ 2.881079] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 2.881125] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 2.881546] vdd_logic: supplied by vcc3v3_sys
[ 2.882559] vdd_gpu: supplied by vcc3v3_sys
[ 2.883145] vcc_ddr: supplied by vcc3v3_sys
[ 2.883740] vdd_npu: supplied by vcc3v3_sys
[ 2.884682] vcc_1v8: supplied by vcc3v3_sys
[ 2.885304] vdda0v9_image: supplied by vcc3v3_sys
[ 2.886727] vdda_0v9: supplied by vcc3v3_sys
[ 2.887833] vdda0v9_pmu: supplied by vcc3v3_sys
[ 2.888926] vccio_acodec: supplied by vcc3v3_sys
[ 2.890360] vccio_sd: supplied by vcc3v3_sys
[ 2.891464] vcc3v3_pmu: supplied by vcc3v3_sys
[ 2.892898] vcca_1v8: supplied by vcc3v3_sys
[ 2.894002] vcca1v8_pmu: supplied by vcc3v3_sys
[ 2.895135] vcca1v8_image: supplied by vcc3v3_sys
[ 2.896565] vcc_3v3: supplied by vcc3v3_sys
[ 2.897481] vcc3v3_sd: supplied by vcc3v3_sys
[ 2.898065] rk817-battery: Failed to locate of_node [id: -1]
[ 2.898225] rk817-battery rk817-battery: Failed to find matching dt id
[ 2.898347] rk817-charger: Failed to locate of_node [id: -1]
[ 2.898488] rk817-charger rk817-charger: Failed to find matching dt id
[ 2.901534] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1
[ 2.904305] goodix_ts_probe() start
[ 2.945107] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 3.093411] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.38
[ 3.093431] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.093440] usb 1-1: Product: USB2.0 Hub
[ 3.094164] hub 1-1:1.0: USB hub found
[ 3.094534] hub 1-1:1.0: 4 ports detected
[ 3.375098] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
[ 3.472658] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00
[ 3.472679] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.472687] usb 1-1.4: Product: 802.11n WLAN Adapter
[ 3.472695] usb 1-1.4: Manufacturer: Realtek
[ 3.472701] usb 1-1.4: SerialNumber: 00e04c000001
[ 5.428564] input: goodix-ts as /devices/platform/fe5a0000.i2c/i2c-1/1-005d/input/input2
[ 5.432663] rtc-hym8563 3-0051: rtc information is valid
[ 5.437989] rtc-hym8563 3-0051: registered as rtc0
[ 5.439034] rtc-hym8563 3-0051: setting system clock to 2023-10-04T08:08:08 UTC (1696406888)
[ 5.442617] rkcifhw fdfe0000.rkcif: Adding to iommu group 7
[ 5.443100] rkcifhw fdfe0000.rkcif: can't request region for resource [mem 0xfdfe0000-0xfdfe7fff]
[ 5.443188] rkcifhw fdfe0000.rkcif: No reserved memory region assign to CIF
[ 5.443362] rkcif rkcif_dvp: rkcif driver version: v00.01.0a
[ 5.443472] rkcif rkcif_dvp: attach to cif hw node
[ 5.443483] rkcif rkcif_dvp: rkcif wait line 0
[ 5.443494] : terminal subdev does not exist
[ 5.443501] : terminal subdev does not exist
[ 5.443508] : terminal subdev does not exist
[ 5.443514] : terminal subdev does not exist
[ 5.444640] OF: graph: no port node found in /rkcif_dvp
[ 5.444659] rkcif_dvp: get_remote_sensor: remote pad is null
[ 5.444668] rkcif_dvp: rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.444681] rkcif_dvp: Async subdev notifier completed
[ 5.444691] rkcif_dvp: get_remote_sensor: remote pad is null
[ 5.444703] rkcif_dvp: rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.444711] rkcif_dvp: There is not terminal subdev, not synchronized with ISP
[ 5.444818] rkcif rkcif_dvp: No memory-region-thunderboot specified
[ 5.444922] rkcif rkcif_mipi_lvds: rkcif driver version: v00.01.0a
[ 5.444990] rkcif rkcif_mipi_lvds: attach to cif hw node
[ 5.445001] rkcif rkcif_mipi_lvds: rkcif wait line 0
[ 5.445010] : terminal subdev does not exist
[ 5.445017] : terminal subdev does not exist
[ 5.445023] : terminal subdev does not exist
[ 5.445029] : terminal subdev does not exist
[ 5.446292] rkcif rkcif_mipi_lvds: No memory-region-thunderboot specified
[ 5.447656] rkcif rkcif_mipi_lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
[ 5.447676] rockchip-mipi-csi2: Async registered subdev
[ 5.447693] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif_mipi_lvds!
[ 5.449485] usbcore: registered new interface driver uvcvideo
[ 5.449498] USB Video Class driver (1.1.1)
[ 5.451166] usbcore: registered new interface driver bfusb
[ 5.451697] cpu cpu0: leakage=22
[ 5.451810] cpu cpu0: pvtm = 84130, from nvmem
[ 5.451828] cpu cpu0: pvtm-volt-sel=1
[ 5.453487] cpu cpu0: avs=0
[ 5.453752] cpu cpu0: EM: created perf domain
[ 5.453811] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=1608000000 h_limit=0 h_table=0
[ 5.459509] sdhci: Secure Digital Host Controller Interface driver
[ 5.459533] sdhci: Copyright(c) Pierre Ossman
[ 5.459540] Synopsys Designware Multimedia Card Interface Driver
[ 5.460151] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.460696] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode.
[ 5.460735] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.
[ 5.460750] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a
[ 5.460819] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 55,32 bit host data width,256 deep fifo
[ 5.461524] leds-gpio: probe of leds failed with error -2
[ 5.461685] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 5.461810] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 5.462815] cryptodev: driver 1.12 loaded.
[ 5.462882] hid: raw HID events driver (C) Jiri Kosina
[ 5.463287] usbcore: registered new interface driver usbhid
[ 5.463299] usbhid: USB HID core driver
[ 5.464497] rockchip,bus bus-npu: Failed to get leakage
[ 5.464565] rockchip,bus bus-npu: pvtm = 84130, from nvmem
[ 5.464583] rockchip,bus bus-npu: pvtm-volt-sel=1
[ 5.464864] rockchip,bus bus-npu: avs=0
[ 5.473329] usbcore: registered new interface driver snd-usb-audio
[ 5.474296] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 5.475276] rk817-codec rk817-codec: DMA mask not set
[ 5.481123] rk-multicodecs rk809-sound: Failed to get ADC channel
[ 5.481317] rk-multicodecs rk809-sound: ASoC: Property 'rockchip,audio-routing' does not exist or its length is not even
[ 5.481330] rk-multicodecs rk809-sound: Audio routing invalid/unspecified
[ 5.482681] rk817-codec rk817-codec: rk817_probe: chip_name:0x80, chip_ver:0x94
[ 5.487954] rk-multicodecs rk809-sound: Don't need to map headset detect gpio to irq
[ 5.491323] Initializing XFRM netlink socket
[ 5.491816] mmc0: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA
[ 5.491885] NET: Registered protocol family 10
[ 5.492820] Segment Routing with IPv6
[ 5.492899] NET: Registered protocol family 17
[ 5.492926] NET: Registered protocol family 15
[ 5.492937] can: controller area network core
[ 5.492986] NET: Registered protocol family 29
[ 5.492996] can: raw protocol
[ 5.493008] can: broadcast manager protocol
[ 5.493023] can: netlink gateway - max_hops=1
[ 5.493359] Bluetooth: RFCOMM socket layer initialized
[ 5.493399] Bluetooth: RFCOMM ver 1.11
[ 5.493418] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.493432] Bluetooth: HIDP socket layer initialized
[ 5.493483] [BT_RFKILL]: Enter rfkill_rk_init
[ 5.493493] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 5.493944] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 5.493995] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723du
[ 5.494005] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 5.494013] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 5.494048] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 5.494056] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 5.494065] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[ 5.494075] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 5.494524] [BT_RFKILL]: bluetooth_platdata_parse_dt: uart_rts_gpios is no-in-use.
[ 5.494688] [BT_RFKILL]: bt_default device registered.
[ 5.494809] Key type dns_resolver registered
[ 5.495773] jaguar1 2-0030: driver version: 00.01.01
[ 5.495957] jaguar1 2-0030: no pinctrl
[ 5.495967] jaguar1 2-0030: get module rockchip,default_rect from dts, wxh(1920x1080)!
[ 5.496014] jaguar1 2-0030: can not find pd2-gpios, error -2
[ 5.496042] jaguar1 2-0030: can not find rst2-gpios, error -2
[ 5.496057] jaguar1 2-0030: can not find pwd-gpios, error -2
[ 5.496071] jaguar1 2-0030: can not find pwd2-gpios, error -2
[ 5.505124] [DRV] I2C Client Init
[ 5.507619] Device (0x60) ID OK... b0 , Chip Count:[0]
[ 5.507627] Device (0x60) REV 0
[ 5.508940] Device ID Error... fa, Chip Count:[1]
[ 5.510228] Device ID Error... fa, Chip Count:[2]
[ 5.511448] Device ID Error... fa, Chip Count:[3]
[ 5.511462] Chip Count = 1
[ 5.511467] Address [0x60][0xff][0xff][0xff]
[ 5.511472] Chip Id [0xb0][0xff][0xff][0xff]
[ 5.511476] Rev Id [0x0][0xff][0xff][0xff]
[ 5.527386] mmc0: Host Software Queue enabled
[ 5.527413] mmc0: new HS200 MMC card at address 0001
[ 5.528091] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 5.528301] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 5.528571] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 5.528779] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (236:0)
[ 5.531552] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[ 5.544113] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_jaguar1 2-0030:bus type 5
[ 5.544597] rkcif_mipi_lvds: Async subdev notifier completed
[ 5.544672] m00_b_jaguar1 2-0030: jaguar1-v4l2 found @ 0x60 (rk3x-i2c)
[ 5.545382] Loading compiled-in X.509 certificates
[ 5.546442] pstore: Using crash dump compression: deflate
[ 5.547453] rga: rga2, irq = 35, match scheduler
[ 5.547854] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[ 5.547909] rga: rga2 probe successfully
[ 5.548196] rga_iommu: IOMMU binding successfully, default mapping core[0x4]
[ 5.548384] rga: Module initialized. v1.2.26
[ 5.568919] mpp_rkvenc fdf40000.rkvenc: Adding to iommu group 5
[ 5.569125] mpp_rkvenc fdf40000.rkvenc: probing start
[ 5.569506] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage
[ 5.569553] mpp_rkvenc fdf40000.rkvenc: pvtm = 84130, from nvmem
[ 5.569565] mpp_rkvenc fdf40000.rkvenc: pvtm-volt-sel=1
[ 5.569711] mpp_rkvenc fdf40000.rkvenc: avs=0
[ 5.569803] mpp_rkvenc fdf40000.rkvenc: failed to find power_model node
[ 5.569812] mpp_rkvenc fdf40000.rkvenc: failed to initialize power model
[ 5.569818] mpp_rkvenc fdf40000.rkvenc: failed to get dynamic-coefficient
[ 5.570188] mpp_rkvenc fdf40000.rkvenc: probing finish
[ 5.570531] mpp_rkvdec2 fdf80200.rkvdec: Adding to iommu group 6
[ 5.570708] mpp_rkvdec2 fdf80200.rkvdec: rkvdec, probing start
[ 5.570968] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
[ 5.570976] rkvdec2_init:1022: No niu aclk reset resource define
[ 5.570985] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
[ 5.570990] rkvdec2_init:1025: No niu hclk reset resource define
[ 5.571196] mpp_rkvdec2 fdf80200.rkvdec: leakage=44
[ 5.571209] mpp_rkvdec2 fdf80200.rkvdec: leakage-volt-sel=0
[ 5.571241] mpp_rkvdec2 fdf80200.rkvdec: pvtm = 84130, from nvmem
[ 5.571250] mpp_rkvdec2 fdf80200.rkvdec: pvtm-volt-sel=1
[ 5.571393] mpp_rkvdec2 fdf80200.rkvdec: avs=0
[ 5.571489] mpp_rkvdec2 fdf80200.rkvdec: failed to find power_model node
[ 5.571498] mpp_rkvdec2 fdf80200.rkvdec: failed to initialize power model
[ 5.571503] mpp_rkvdec2 fdf80200.rkvdec: failed to get dynamic-coefficient
[ 5.571595] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000
[ 5.571603] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000
[ 5.571609] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056
[ 5.571615] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536
[ 5.571622] mpp_rkvdec2 fdf80200.rkvdec: min_width 512
[ 5.571662] mpp_rkvdec2 fdf80200.rkvdec: link mode probe finish
[ 5.571720] mpp_rkvdec2 fdf80200.rkvdec: probing finish
[ 5.572495] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu
[ 5.572597] mali fde60000.gpu: Kernel DDK version g17p0-01eac0
[ 5.572616] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3000000 uV) supplied by vccio_acodec
[ 5.572736] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd
[ 5.572841] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8
[ 5.572924] mali fde60000.gpu: leakage=6
[ 5.572960] mali fde60000.gpu: pvtm = 84130, from nvmem
[ 5.572963] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3
[ 5.572980] mali fde60000.gpu: pvtm-volt-sel=1
[ 5.573003] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8
[ 5.573051] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3
[ 5.573458] mali fde60000.gpu: avs=0
[ 5.573485] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[ 5.573916] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
[ 5.573982] mali fde60000.gpu: No priority control manager is configured
[ 5.574129] mali fde60000.gpu: No memory group manager is configured
[ 5.575823] mali fde60000.gpu: l=0 h=2147483647 hyst=5000 l_limit=700000000 h_limit=0 h_table=0
[ 5.577609] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x2a, primary plane phy id: 5
[ 5.577629] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x15, primary plane phy id: 4
[ 5.577638] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
[ 5.577843] [drm] failed to init overlay plane Cluster0-win1
[ 5.577879] [drm] failed to init overlay plane Cluster1-win1
[ 5.577989] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffffc00937de90)
[ 5.578175] rockchip-drm display-subsystem: bound fdc60000.syscon:lvds (ops 0xffffffc00938ff38)
[ 5.578378] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 5.579103] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 5.579228] mali fde60000.gpu: Probed as mali0
[ 5.579550] dwhdmi-rockchip fe0a0000.hdmi: IRQ index 1 not found
[ 5.580181] input: hdmi_cec_key as /devices/platform/fe0a0000.hdmi/dw-hdmi-cec.3.auto/input/input3
[ 5.580695] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffffc00938c908)
[ 5.615205] vendor storage:20190527 ret = 0
[ 5.717932] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[ 5.719126] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[ 5.719894] input: adc-keys as /devices/platform/adc-keys/input/input4
[ 5.721828] rkcif rkcif_dvp: clear unready subdev num: 0
[ 5.721864] rkcif_dvp: get_remote_sensor: remote pad is null
[ 5.721875] rkcif_dvp: rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[ 5.721883] rkcif_dvp: There is not terminal subdev, not synchronized with ISP
[ 5.721895] rkcif rkcif_mipi_lvds: clear unready subdev num: 0
[ 5.722644] rockchip_headset rk-headset: Can not read property headset_gpio
[ 5.722672] rockchip_headset: probe of rk-headset failed with error -2
[ 5.723012] RKNPU fde40000.npu: Adding to iommu group 0
[ 5.723508] RKNPU fde40000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[ 5.723806] RKNPU fde40000.npu: can't request region for resource [mem 0xfde40000-0xfde4ffff]
[ 5.724430] [drm] Initialized rknpu 0.8.8 20230428 for fde40000.npu on minor 1
[ 5.724705] RKNPU fde40000.npu: leakage=4
[ 5.724754] RKNPU fde40000.npu: pvtm = 84130, from nvmem
[ 5.724777] RKNPU fde40000.npu: pvtm-volt-sel=1
[ 5.725549] RKNPU fde40000.npu: avs=0
[ 5.725811] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 5.726489] RKNPU fde40000.npu: failed to find power_model node
[ 5.726510] RKNPU fde40000.npu: RKNPU: failed to initialize power model
[ 5.726523] RKNPU fde40000.npu: RKNPU: failed to get dynamic-coefficient
[ 5.727904] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.730635] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.731866] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[ 5.731899] rockchip-suspend not set sleep-mode-config for mem-lite
[ 5.731912] rockchip-suspend not set wakeup-config for mem-lite
[ 5.731925] rockchip-suspend not set sleep-mode-config for mem-ultra
[ 5.731934] rockchip-suspend not set wakeup-config for mem-ultra
[ 5.733421] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '11:52:21', on 'Oct 3 2023'.
[ 5.734024] Mali:
[ 5.734029] Mali device driver loaded
[ 5.734054] ALSA device list:
[ 5.734066] #0: rockchip-rk809
[ 5.734937] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.734962] cfg80211: failed to load regulatory.db
[ 5.941212] EXT4-fs (mmcblk0p6): 1 orphan inode deleted
[ 5.941247] EXT4-fs (mmcblk0p6): recovery complete
[ 5.946526] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.946616] VFS: Mounted root (ext4 filesystem) on device 179:6.
[ 5.946993] devtmpfs: mounted
[ 5.951942] Freeing unused kernel memory: 6720K
[ 5.955169] Run /sbin/init as init process
[ 5.959111] Run /etc/init as init process
[ 5.959204] Run /bin/init as init process
[ 5.959254] Run /bin/sh as init process
[ 5.959297] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
[ 5.961435] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.10.160 #3
[ 5.961972] Hardware name: Rockchip RK3568 EVB2 LP4X V10 Board (DT)
[ 5.962522] Call trace:
[ 5.962751] dump_backtrace+0x0/0x1e0
[ 5.963076] show_stack+0x20/0x30
[ 5.963379] dump_stack_lvl+0xd0/0xf8
[ 5.963703] dump_stack+0x18/0x38
[ 5.964002] panic+0x164/0x344
[ 5.964281] kernel_init+0x104/0x11c
[ 5.964604] ret_from_fork+0x10/0x34
[ 5.964929] SMP: stopping secondary CPUs
[ 5.965281] CPU3: stopping
[ 5.965308] CPU0: stopping
[ 5.965316] CPU1: stopping
[ 5.965321] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.10.160 #3
[ 5.965322] Hardware name: Rockchip RK3568 EVB2 LP4X V10 Board (DT)
[ 5.965323] Call trace:
[ 5.965328] dump_backtrace+0x0/0x1e0
[ 5.965332] show_stack+0x20/0x30
[ 5.965336] dump_stack_lvl+0xd0/0xf8
[ 5.965339] dump_stack+0x18/0x38
[ 5.965343] local_cpu_stop+0x78/0x80
[ 5.965345] ipi_handler+0x168/0x280
[ 5.965350] handle_percpu_devid_fasteoi_ipi+0x98/0x170
[ 5.965354] handle_domain_irq+0x7c/0xe0
[ 5.965356] gic_handle_irq+0xfc/0x36c
[ 5.965358] el1_irq+0xcc/0x180
[ 5.965362] cpuidle_enter_state+0xe0/0x420
[ 5.965364] cpuidle_enter+0x40/0x60
[ 5.965369] do_idle+0x238/0x2ec
[ 5.965372] cpu_startup_entry+0x30/0x6c
[ 5.965374] secondary_start_kernel+0x188/0x1e0
[ 5.965531] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.160 #3
[ 5.972857] Hardware name: Rockchip RK3568 EVB2 LP4X V10 Board (DT)
[ 5.973406] Call trace:
[ 5.973628] dump_backtrace+0x0/0x1e0
[ 5.973952] show_stack+0x20/0x30
[ 5.974252] dump_stack_lvl+0xd0/0xf8
[ 5.974575] dump_stack+0x18/0x38
[ 5.974875] local_cpu_stop+0x78/0x80
[ 5.975198] ipi_handler+0x168/0x280
[ 5.975521] handle_percpu_devid_fasteoi_ipi+0x98/0x170
[ 5.975980] __handle_domain_irq+0x7c/0xe0
[ 5.976347] gic_handle_irq+0xfc/0x36c
[ 5.976681] el1_irq+0xcc/0x180
[ 5.976958] cpuidle_enter_state+0xe0/0x420
[ 5.977326] cpuidle_enter+0x40/0x60
[ 5.977650] do_idle+0x238/0x2ec
[ 5.977938] cpu_startup_entry+0x2c/0x6c
[ 5.978284] secondary_start_kernel+0x188/0x1e0
[ 5.978687] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.160 #3
[ 5.979225] Hardware name: Rockchip RK3568 EVB2 LP4X V10 Board (DT)
[ 5.979774] Call trace:
[ 5.979996] dump_backtrace+0x0/0x1e0
[ 5.980319] show_stack+0x20/0x30
[ 5.980622] dump_stack_lvl+0xd0/0xf8
[ 5.980945] dump_stack+0x18/0x38
[ 5.981245] local_cpu_stop+0x78/0x80
[ 5.981568] ipi_handler+0x168/0x280
[ 5.981891] handle_percpu_devid_fasteoi_ipi+0x98/0x170
[ 5.982350] handle_domain_irq+0x7c/0xe0
[ 5.982717] gic_handle_irq+0xfc/0x36c
[ 5.983050] el1_irq+0xcc/0x180
[ 5.983328] cpuidle_enter_state+0xe0/0x420
[ 5.983696] cpuidle_enter+0x40/0x60
[ 5.984018] do_idle+0x238/0x2ec
[ 5.984307] cpu_startup_entry+0x2c/0x6c
[ 5.984654] rest_init+0xc4/0xd4
[ 5.984943] arch_call_rest_init+0x18/0x24
[ 5.985311] start_kernel+0x5f8/0x630
[ 5.985635] PMU CRU:
[ 5.985841] 00000000: 00006064 00001481 00000000 00000007 00007f00 00000000 00000000 00000000
[ 5.986589] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.987336] 00000040: 00002129 00001588 00000000 00000007 00007f00 00000000 00000000 00000000
[ 5.988083] 00000060: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.988829] 00000080: 00000005 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.989576] 000000a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.990324] 000000c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.991070] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.991817] 00000100: 00000080 0040b71b 00000001 00000001 00000800 00000000 00000001 00000009
[ 5.992563] 00000120: 0000050f 00008888 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.993311] 00000140: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.994056] 00000160: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.994813] 00000180: 00000000 0000393f 0000f571 00000000 00000000 00000000 00000000 00000000
[ 5.995559] 000001a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.996304] 000001c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.997049] 000001e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.997796] 00000200: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.998542] 00000220: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.999294] 00000240: 00040020 00000000
[ 5.999639] CRU:
[ 5.999806] 00000000: 0000104b 00001441 00000000 00000007 00007f00 00000000 00000000 00000000
[ 6.000552] 00000020: 00004082 00001441 00000000 00000007 00007f00 00000000 00000000 00000000
[ 6.001298] 00000040: 00002063 00001441 00000000 00000007 00007f00 00000000 00000000 00000000
[ 6.002053] 00000060: 0000107d 00001443 00000000 00000007 00007f00 00000000 00000000 00000000
[ 6.002799] 00000080: 00002064 00001441 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.003554] 000000a0: 00001033 00001481 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.004311] 000000c0: 00005455 00000000 00000000 00000000 00640064 00000000 00000000 00000103
[ 6.005058] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.005814] 00000100: 000080c0 00000000 00008100 00000505 00000505 00000111 00004155 000000e5
[ 6.006560] 00000120: 00000053 00000100 00000001 00008000 00040004 00008000 00040004 00000400
[ 6.007306] 00000140: 00803057 00008000 00040004 00008000 00040004 00008000 00040004 00004000
[ 6.008051] 00000160: 00040004 0000000b 00000000 00000010 00001031 00001c30 00000520 00000000
[ 6.008797] 00000180: 00000020 00000000 00004310 0000c001 0000c0c0 00003100 00000001 00000000
[ 6.009543] 000001a0: 00000408 00000003 00000103 00002100 00000203 00000003 00000000 00000103
[ 6.010290] 000001c0: 00000003 00000303 00000001 00001725 0000200b 00000000 0000200b 00000000
[ 6.011036] 000001e0: 0000200b 00000000 0000200b 00000000 0000200b 00000000 0000200b 00000000
[ 6.011782] 00000200: 0000200b 00000000 0000200b 00000000 0000200b 00000000 00000703 00000203
[ 6.012527] 00000220: 00001500 00000000 0000001f 00000302 00000705 00000f0b 0000013b 00000303
[ 6.013273] 00000240: 00000f07 00002713 00001f09 00008000 00040004 00003b2f 00000101 00000302
[ 6.014018] 00000260: 00000704 0000130f 00001f27 00000000 00000000 00000000 00000000 00000000
[ 6.014763] 00000280: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.015518] 000002a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.016273] 000002c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.017029] 000002e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.017774] 00000300: 00000000 00000e00 000001c9 00000f9f 00000000 0000f300 0000ffff 0000ffff
[ 6.018521] 00000320: 0000f87f 00000c1f 00000010 00000070 00001f1f 0000005f 00000000 0000111c
[ 6.019267] 00000340: 00000000 00000447 00002e07 00000717 00003000 000003c7 0000d033 0000fff3
[ 6.020013] 00000360: 000001c3 00000000 00000e00 0000f660 0000fff6 0000ffff 0000ffff 0000f403
[ 6.020758] 00000380: 000087e7 0000a100 00007800 00000000 00000000 00000000 00000000 00000000
[ 6.021504] 000003a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.022249] 000003c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.022995] 000003e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.023740] 00000400: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.024496] 00000420: 00000000 00000010 00000002 00000002 00000002 00000000 00000000 00000000
[ 6.025240] 00000440: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.025985] 00000460: 00000000 00000000 00000400 00000000 00000000 00000000 00000000 00000000
[ 6.026740] 00000480: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.027485] 000004a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.028230] 000004c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.028976] 000004e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.029731] 00000500: 00040020 00000000 00040020 00000000 00040020 00000000 00040020 00000000
[ 6.030477] 00000520: 00040020 00000000 00040020 00000000 00040020 00000000 00040020 00000000
[ 6.031221] 00000540: 00040020 00000000 00040020 00000000 00000000 00000000 00000000 00000000
[ 6.031966] 00000560: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.032719] 00000580: 00000002 00000000
[ 6.033064] CPU0 online:0
[ 6.033300] EL2(NS) PC: <0xffffffc0080277b8> local_cpu_stop+0x48/0x80
[ 6.033881] EL2(NS) PC: <0xffffffc0080277bc> local_cpu_stop+0x4c/0x80
[ 6.034455] EL2(NS) PC: <0xffffffc0080277b8> local_cpu_stop+0x48/0x80
[ 6.035094]
[ 6.035234] CPU1 online:0
[ 6.035468] EL2(NS) PC: <0xffffffc0080277b8> local_cpu_stop+0x48/0x80
[ 6.036116]
[ 6.036256] CPU2 online:1
[ 6.036492] EL2(NS) PC: <0xffffffc008719418> rockchip_panic_notify+0x318/0x450
[ 6.037135] EL2(NS) PC: <0xffffffc008719414> rockchip_panic_notify+0x314/0x450
[ 6.037778] EL2(NS) PC: <0xffffffc008719418> rockchip_panic_notify+0x318/0x450
[ 6.038421] EL2(NS) PC: <0xffffffc008719414> rockchip_panic_notify+0x314/0x450
[ 6.039062] EL2(NS) PC: <0xffffffc008719418> rockchip_panic_notify+0x318/0x450
[ 6.039704] EL2(NS) PC: <0xffffffc008719414> rockchip_panic_notify+0x314/0x450
[ 6.040409]
[ 6.040549] CPU3 online:0
[ 6.040782] EL2(NS) PC: <0xffffffc0080277b8> local_cpu_stop+0x48/0x80
[ 6.041390] EL2(NS) PC: <0xffffffc0080277bc> local_cpu_stop+0x4c/0x80
[ 6.041964] EL2(NS) PC: <0xffffffc0080277b8> local_cpu_stop+0x48/0x80
[ 6.042576]
[ 6.042720] CPU0 CPU1 CPU2 CPU3
[ 6.043277] 13: 1128 484 476 757 GICv3 26 Level arch_timer
[ 6.044043] 14: 44 30 27 4 GICv3 141 Level rk_timer
[ 6.044789] 15: 0 0 0 0 GICv3 260 Level arm-pmu
[ 6.045532] 16: 0 0 0 0 GICv3 261 Level arm-pmu
[ 6.046276] 17: 0 0 0 0 GICv3 262 Level arm-pmu
[ 6.047020] 18: 0 0 0 0 GICv3 263 Level arm-pmu
[ 6.047765] 19: 0 0 0 0 GICv3 126 Level ahci[fc000000.sata]
[ 6.048599] 20: 0 0 0 0 GICv3 128 Level ahci[fc800000.sata]
[ 6.049433] 21: 64 0 0 0 GICv3 162 Level ehci_hcd:usb1
[ 6.050221] 22: 0 0 0 0 GICv3 163 Level ohci_hcd:usb3
[ 6.051010] 23: 0 0 0 0 GICv3 165 Level ehci_hcd:usb2
[ 6.051798] 24: 0 0 0 0 GICv3 166 Level ohci_hcd:usb4
[ 6.052588] 25: 671 0 0 0 GICv3 78 Level fdd40000.i2c
[ 6.053366] 27: 0 1 0 0 GICv3 114 Level rk_pwm_irq
[ 6.054133] 28: 0 0 0 0 GICv3 118 Level rk_pwm_pwr_irq
[ 6.054925] 29: 0 0 0 0 GICv3 183 Level fde4b000.iommu, fde40000.npu
[ 6.055828] 30: 1 0 0 0 GICv3 71 Level fde60000.gpu
[ 6.056604] 31: 1 0 0 0 GICv3 73 Level fde60000.gpu
[ 6.057382] 32: 1 0 0 0 GICv3 72 Level fde60000.gpu
[ 6.058159] 33: 0 0 0 0 GICv3 171 Level fdea0400.vdpu
[ 6.058949] 34: 0 0 0 0 GICv3 170 Level fdea0800.iommu
[ 6.059738] 35: 0 0 0 0 GICv3 122 Level rga2
[ 6.060460] 36: 0 0 0 0 GICv3 94 Level fded0000.jpegd
[ 6.061250] 37: 0 0 0 0 GICv3 93 Level fded0480.iommu
[ 6.062039] 38: 0 0 0 0 GICv3 96 Level fdee0000.vepu
[ 6.062828] 39: 0 0 0 0 GICv3 95 Level fdee0800.iommu
[ 6.063617] 40: 0 0 0 0 GICv3 88 Level fdef0800.iommu, fdef0000.iep
[ 6.064519] 41: 0 0 0 0 GICv3 172 Level fdf40000.rkvenc
[ 6.065319] 42: 0 0 0 0 GICv3 173 Level fdf40f00.iommu
[ 6.066108] 43: 0 0 0 0 GICv3 174 Level fdf40f00.iommu
[ 6.066897] 44: 0 0 0 0 GICv3 123 Level fdf80200.rkvdec
[ 6.067697] 45: 0 0 0 0 GICv3 124 Level fdf80800.iommu
[ 6.068487] 46: 0 0 0 0 GICv3 40 Level rockchip-mipi-csi2
[ 6.069310] 47: 0 0 0 0 GICv3 41 Level rockchip-mipi-csi2
[ 6.070134] 48: 0 0 0 0 GICv3 178 Level fdfe0800.iommu, rkcifhw
[ 6.070993] 51: 37 0 0 0 GICv3 180 Level fe043e00.iommu, fe040000.vop
[ 6.071896] 52: 68 0 0 0 GICv3 77 Level fe0a0000.hdmi, dw-hdmi-cec
[ 6.072776] 55: 0 0 0 0 GICv3 130 Level dw-mci
[ 6.073509] 56: 2618 0 0 0 GICv3 51 Level mmc0
[ 6.074231] 58: 0 0 0 0 GICv3 84 Level i2s
[ 6.074940] 59: 0 0 0 0 GICv3 85 Level i2s
[ 6.075649] 60: 0 0 0 0 GICv3 46 Level fe530000.dmac
[ 6.076437] 61: 0 0 0 0 GICv3 45 Level fe530000.dmac
[ 6.077225] 62: 0 0 0 0 GICv3 48 Level fe550000.dmac
[ 6.078014] 63: 0 0 0 0 GICv3 47 Level fe550000.dmac
[ 6.078802] 64: 0 0 0 0 GICv3 34 Level can0
[ 6.079523] 65: 240 0 0 0 GICv3 79 Level fe5a0000.i2c
[ 6.080302] 66: 134 0 0 0 GICv3 80 Level fe5b0000.i2c
[ 6.081080] 67: 28 0 0 0 GICv3 81 Level fe5c0000.i2c
[ 6.081859] 68: 0 0 0 0 GICv3 82 Level fe5d0000.i2c
[ 6.082636] 69: 0 0 0 0 GICv3 181 Edge fe600000.watchdog
[ 6.083448] 70: 0 0 0 0 GICv3 135 Level fe610000.spi
[ 6.084225] 71: 0 0 0 0 GICv3 137 Level fe630000.spi
[ 6.085004] 74: 0 0 0 0 GICv3 147 Level rockchip_thermal
[ 6.085815] 75: 3 0 0 0 GICv3 125 Level fe720000.saradc
[ 6.086616] 76: 1 0 0 0 GICv3 167 Level rockchip_usb2phy
[ 6.087426] 77: 0 0 0 0 GICv3 168 Level rockchip_usb2phy
[ 6.088239] 78: 0 0 0 0 GICv3 65 Level (null)
[ 6.088971] 79: 0 0 0 0 GICv3 66 Level (null)
[ 6.089704] 80: 0 0 0 0 GICv3 67 Level (null)
[ 6.090436] 81: 0 0 0 0 GICv3 68 Level (null)
[ 6.091168] 82: 0 0 0 0 GICv3 69 Level (null)
[ 6.091901] 83: 0 0 0 0 GICv3 284 Edge debug-signal
[ 6.092679] 84: 0 0 0 0 GICv3 150 Level debug
[ 6.093403] 86: 0 0 0 0 GICv3 202 Level xhci-hcd:usb5
[ 6.094193] 87: 0 0 0 0 rockchip_gpio_irq 3 Level rk817
[ 6.094984] 88: 0 0 0 0 rk817 0 Edge rk805_pwrkey_fall
[ 6.095794] 89: 0 0 0 0 rk817 1 Edge rk805_pwrkey_rise
[ 6.096615] 112: 0 0 0 0 rockchip_gpio_irq 13 Edge gt9xx
[ 7.097528] CPU0 CPU1 CPU2 CPU3
[ 7.098084] 13: 1128 484 476 757 GICv3 26 Level arch_timer
[ 7.098850] 14: 44 30 27 4 GICv3 141 Level rk_timer
[ 7.099595] 15: 0 0 0 0 GICv3 260 Level arm-pmu
[ 7.100338] 16: 0 0 0 0 GICv3 261 Level arm-pmu
[ 7.101082] 17: 0 0 0 0 GICv3 262 Level arm-pmu
[ 7.101826] 18: 0 0 0 0 GICv3 263 Level arm-pmu
[ 7.102569] 19: 0 0 0 0 GICv3 126 Level ahci[fc000000.sata]
[ 7.103402] 20: 0 0 0 0 GICv3 128 Level ahci[fc800000.sata]
[ 7.104235] 21: 64 0 0 0 GICv3 162 Level ehci_hcd:usb1
[ 7.105024] 22: 0 0 0 0 GICv3 163 Level ohci_hcd:usb3
[ 7.105812] 23: 0 0 0 0 GICv3 165 Level ehci_hcd:usb2
[ 7.106601] 24: 0 0 0 0 GICv3 166 Level ohci_hcd:usb4
[ 7.107388] 25: 671 0 0 0 GICv3 78 Level fdd40000.i2c
[ 7.108165] 27: 0 1 0 0 GICv3 114 Level rk_pwm_irq
[ 7.108931] 28: 0 0 0 0 GICv3 118 Level rk_pwm_pwr_irq
[ 7.109720] 29: 0 0 0 0 GICv3 183 Level fde4b000.iommu, fde40000.npu
[ 7.110623] 30: 1 0 0 0 GICv3 71 Level fde60000.gpu
[ 7.111400] 31: 1 0 0 0 GICv3 73 Level fde60000.gpu
[ 7.112177] 32: 1 0 0 0 GICv3 72 Level fde60000.gpu
[ 7.112954] 33: 0 0 0 0 GICv3 171 Level fdea0400.vdpu
[ 7.113742] 34: 0 0 0 0 GICv3 170 Level fdea0800.iommu
[ 7.114531] 35: 0 0 0 0 GICv3 122 Level rga2
[ 7.115251] 36: 0 0 0 0 GICv3 94 Level fded0000.jpegd
[ 7.116040] 37: 0 0 0 0 GICv3 93 Level fded0480.iommu
[ 7.116830] 38: 0 0 0 0 GICv3 96 Level fdee0000.vepu
[ 7.117619] 39: 0 0 0 0 GICv3 95 Level fdee0800.iommu
[ 7.118409] 40: 0 0 0 0 GICv3 88 Level fdef0800.iommu, fdef0000.iep
[ 7.119310] 41: 0 0 0 0 GICv3 172 Level fdf40000.rkvenc
[ 7.120111] 42: 0 0 0 0 GICv3 173 Level fdf40f00.iommu
[ 7.120902] 43: 0 0 0 0 GICv3 174 Level fdf40f00.iommu
[ 7.121701] 44: 0 0 0 0 GICv3 123 Level fdf80200.rkvdec
[ 7.122500] 45: 0 0 0 0 GICv3 124 Level fdf80800.iommu
[ 7.123289] 46: 0 0 0 0 GICv3 40 Level rockchip-mipi-csi2
[ 7.124112] 47: 0 0 0 0 GICv3 41 Level rockchip-mipi-csi2
[ 7.124936] 48: 0 0 0 0 GICv3 178 Level fdfe0800.iommu, rkcifhw
[ 7.125794] 51: 37 0 0 0 GICv3 180 Level fe043e00.iommu, fe040000.vop
[ 7.126695] 52: 68 0 0 0 GICv3 77 Level fe0a0000.hdmi, dw-hdmi-cec
[ 7.127575] 55: 0 0 0 0 GICv3 130 Level dw-mci
[ 7.128307] 56: 2618 0 0 0 GICv3 51 Level mmc0
[ 7.129027] 58: 0 0 0 0 GICv3 84 Level i2s
[ 7.129736] 59: 0 0 0 0 GICv3 85 Level i2s
[ 7.130447] 60: 0 0 0 0 GICv3 46 Level fe530000.dmac
[ 7.131235] 61: 0 0 0 0 GICv3 45 Level fe530000.dmac
[ 7.132025] 62: 0 0 0 0 GICv3 48 Level fe550000.dmac
[ 7.132813] 63: 0 0 0 0 GICv3 47 Level fe550000.dmac
[ 7.133602] 64: 0 0 0 0 GICv3 34 Level can0
[ 7.134322] 65: 240 0 0 0 GICv3 79 Level fe5a0000.i2c
[ 7.135099] 66: 134 0 0 0 GICv3 80 Level fe5b0000.i2c
[ 7.135877] 67: 28 0 0 0 GICv3 81 Level fe5c0000.i2c
[ 7.136654] 68: 0 0 0 0 GICv3 82 Level fe5d0000.i2c
[ 7.137432] 69: 0 0 0 0 GICv3 181 Edge fe600000.watchdog
[ 7.138243] 70: 0 0 0 0 GICv3 135 Level fe610000.spi
[ 7.139020] 71: 0 0 0 0 GICv3 137 Level fe630000.spi
[ 7.139797] 74: 0 0 0 0 GICv3 147 Level rockchip_thermal
[ 7.140610] 75: 3 0 0 0 GICv3 125 Level fe720000.saradc
[ 7.141409] 76: 1 0 0 0 GICv3 167 Level rockchip_usb2phy
[ 7.142220] 77: 0 0 0 0 GICv3 168 Level rockchip_usb2phy
[ 7.143031] 78: 0 0 0 0 GICv3 65 Level (null)
[ 7.143763] 79: 0 0 0 0 GICv3 66 Level (null)
[ 7.144495] 80: 0 0 0 0 GICv3 67 Level (null)
[ 7.145227] 81: 0 0 0 0 GICv3 68 Level (null)
[ 7.145959] 82: 0 0 0 0 GICv3 69 Level (null)
[ 7.146691] 83: 0 0 0 0 GICv3 284 Edge debug-signal
[ 7.147469] 84: 0 0 0 0 GICv3 150 Level debug
[ 7.148190] 86: 0 0 0 0 GICv3 202 Level xhci-hcd:usb5
[ 7.148979] 87: 0 0 0 0 rockchip_gpio_irq 3 Level rk817
[ 7.149767] 88: 0 0 0 0 rk817 0 Edge rk805_pwrkey_fall
[ 7.150579] 89: 0 0 0 0 rk817 1 Edge rk805_pwrkey_rise
[ 7.151396] 112: 0 0 0 0 rockchip_gpio_irq 13 Edge gt9xx
[ 7.152183] PMU:
[ 7.152347] pwr 0x00a0: 00000067 00000000 00000003 00000000
[ 7.152891] status 0x0098: 00000067 00000000 00000067 00000000
[ 7.153433] req 0x0050: 0000006e 00000000 00000000 00000000
[ 7.153974] idle 0x0068: 0000006e 00000000 0000ffff 0000000f
[ 7.154516] ack 0x0060: 0000006e 00000000 0000006e 00000000
[ 7.155062] rockchip-thermal fe710000.tsadc: channal 0: temperature(53 C)
[ 7.155656] THERMAL REGS:
[ 7.155893] 00000000: 00000fc0 00030033 00000301 00000002 00000000 00000000 00000000 00000000
[ 7.156641] 00000020: 000008a8 000008b0 00000000 00000000 00000940 00000000 00000000 00000000
[ 7.157389] 00000040: 00000a70 00000a70 00000000 00000000 00000000 00000000 00000000 00000000
[ 7.158135] 00000060: 00000004 00000004 00000656 00000656 00000000 00000000 00000000 00000000
[ 7.158876] 00000080: 00000000 00000000
[ 7.159221] Kernel Offset: disabled
[ 7.159532] CPU features: 0x000,08000026,2a00aa18
[ 7.159945] Memory Limit: none
[ 7.160232] cpu cpu0: cur_freq: 1800000000 Hz, volt: 1100000 uV
[ 7.171818] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---`
Is that possible mpp can cause device to crash?
We still could not understand how?
Thanks for help...
HermanChen
mpp gives those errors, after not certain time it crushes firmware, and device cannot boot again.
Any help?