Closed GoogleCodeExporter closed 8 years ago
what telemetry rates did you have selected in the gcs software?
Original comment by Meee...@gmail.com
on 5 Aug 2011 at 10:51
what telemetry rates did you have selected in the gcs software?
the xbee are set at 9600 and telemetry software are config the 9600.
i test so with 38400 and not work .
Original comment by carlosma...@hotmail.com
on 5 Aug 2011 at 8:54
I'm unable to understand this issue report. I'm flagging it invalid until
someone can explain it better.
Original comment by analogue...@gmail.com
on 23 Aug 2011 at 9:23
Have you tried 2.12 ? I am able to use 9600 baud with that.
Original comment by narpat...@gmail.com
on 23 Aug 2011 at 9:36
El problema es que al setear a una velocidad diferente a 57600 no logra enlazar.
a 57600 funciona correctamente.
He seteado a 9600 ambos xbee con xctu y funcionan correctamente.
he compilado el apm cambiando el APM_Config.h file :
#define GCS_PORT 3
#define SERIAL3_BAUD 9600
el soft de telemetria lo configuro a 9600 y no logra enlazarce.
Original comment by carlosma...@hotmail.com
on 23 Aug 2011 at 11:17
Please be in english only.
Original comment by vu2...@gmail.com
on 24 Aug 2011 at 2:53
The problem is that on having formed to a different speed from 57600 it does
not manage to connect.
I have formed to 9600 both xbee with xctu and they work correctly.
I have compiled the apm changing the APM_Config.h file:
#define GCS_PORT 3
#define SERIAL3_BAUD 9600
The soft of telemetry I it form to 9600 and it does not manage to connect
Original comment by carlosma...@hotmail.com
on 24 Aug 2011 at 5:31
Original issue reported on code.google.com by
carlosma...@hotmail.com
on 4 Aug 2011 at 3:23