rodw-au
commented
1 year ago Most likely its becasue you are using the XML here is for my drives and your devices. You need to edit or remove devices to suit what you have connected. You probably do not have a I/O module attached to your BUS,
hi. i have this error: HAL: ERROR: pin 'lcec.0.3.out-01' not found
mehdi@2C-44-FD-0E-B1-03:~/linuxcnc/configs/linuxcnc-cia402$ linuxcnc cia402.ini LINUXCNC - 2.10.0-pre0-173-gcadd89a54 Machine configuration directory is '/home/mehdi/linuxcnc/configs/linuxcnc-cia402' Machine configuration file is 'cia402.ini' Starting LinuxCNC... emc/iotask/ioControl_v2.cc 888: iov2: can't load tool table. linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Note: Using POSIX realtime Found file(REL): ./cia402.hal Failed to register PDO entry: No such file or directory LCEC: master 0 PDO entry registration failed lcec: rtapi_app_main: Invalid argument (-22) ./cia402.hal:15: waitpid failed /usr/bin/rtapi_app lcec ./cia402.hal:15: /usr/bin/rtapi_app exited without becoming ready ./cia402.hal:15: insmod for lcec failed, returned -1 Shutting down and cleaning up LinuxCNC... Running HAL shutdown script HAL: ERROR: pin 'lcec.0.3.out-01' not found shutdown.hal:2: unlink failed iov2: exiting Note: Using POSIX realtime LinuxCNC terminated with an error. You can find more information in the log: /home/mehdi/linuxcnc_debug.txt and /home/mehdi/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminali installed linuxcnc using iso and upgraded it to 2.9 using buildbot. i used instructions in the Ethercat Installation instructions.txt and your post in forum.linuxcnc.org . i issued this error here because for some unknown reasons forum is blocking me to enter but i can use other subdomains like wiki.linuxcnc.org !!