dont'hacking

[alteus83]

Hello,

my camera has the following version/firmware: IFUSY44UWSIIJN..../ 9.0.19.02_202007141512

but with the version nothing happens once you put the SD(thi version use y21ga_0.1.5.tar) and wait for the reboot. I try to connect to the IP but nothing.

Help me :(

[roleoroleo]

Try another sd card.

[alteus83]

which one do you recommend?

Ma sei italiano credo 😁

[roleoroleo]

Eh sì...

I can't recommend a card. Some work, some don't work.

[alteus83]

Ottimo, andrò a tentativi ma almeno comincio a eliminare qualcosa

Il giorno lun 29 mar 2021 alle 18:47 roleo @.***> ha scritto:

Eh sì...

I can't recommend a card. Some work, some don't work.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/119#issuecomment-809536896, or unsubscribe https://github.com/notifications/unsubscribe-auth/AH7LIPTHRICR6ACMIVUH3KLTGC4LXANCNFSM4Z6ORNPQ .

-- Christian Fusato

....Non crearti un problema se non hai la soluzione....

[alteus83]

come non detto, ho provato con una SD kingstone che avevo a casa da 4g e oggi ho comprato una verbatim da 16 ma nulla......non parte il cambio del firmware.

sono sfortunato :( chissà che versione sarà la mia

[roleoroleo]

Based on the fw version your cam is compatible with this hack.

[alteus83]

Però non parte l’upgrade,

Domanda, una volta messo il file unzippato, il y21ga_0.1.5.tar e messa la SD con il file nella cam da accesa non devo fare altro che andare sull’ip da guida? (Ovviamente aspettando che torna blu la spia)

Il giorno mar 30 mar 2021 alle 22:12 roleo @.***> ha scritto:

Based on the fw version your cam is compatible with this hack.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/119#issuecomment-810546005, or unsubscribe https://github.com/notifications/unsubscribe-auth/AH7LIPRRKL4VFM7W2QNTZA3TGIWA7ANCNFSM4Z6ORNPQ .

-- Christian Fusato

....Non crearti un problema se non hai la soluzione....

[roleoroleo]

Did you decompress gz or tar.gz? You have to copy in your sd card Factory folder, newhome folder, etc..

[alteus83]

Il file una volta decompresso è.tar

Il file è copiato dentro la root dell SD, praticamente c’è solo quel file.

Il giorno mar 30 mar 2021 alle 23:08 roleo @.***> ha scritto:

Did you decompress gz or tar.gz? You have to copy in your sd card Factory folder, newhome folder, etc..

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/119#issuecomment-810578598, or unsubscribe https://github.com/notifications/unsubscribe-auth/AH7LIPVNB5VQEN5DX5A2SOLTGI4TFANCNFSM4Z6ORNPQ .

-- Christian Fusato

....Non crearti un problema se non hai la soluzione....

[roleoroleo]

Decompress tar also. The sd card should appear:

[alteus83]

Ti ringrazio per la disponibilità, sta sera provo e ti faccio sapere.

Il giorno mer 31 mar 2021 alle 09:17 roleo @.***> ha scritto:

Decompress tar also. The sd card should appear: [image: immagine] https://user-images.githubusercontent.com/39277388/113105388-d28cd680-9201-11eb-94eb-290e1400c863.png

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/119#issuecomment-810835179, or unsubscribe https://github.com/notifications/unsubscribe-auth/AH7LIPTCGNXOTVPGCMKTJQLTGLD7FANCNFSM4Z6ORNPQ .

-- Christian Fusato

....Non crearti un problema se non hai la soluzione....

[alteus83]

Ho risolto, ho cambiato ancora SD e alla fine è andata, hai per caso una config esempio da consigliarmi? da inserire in home assistant per creare uan scheda?

Grazie Mille, se hai un link donazioni ti offro una birra :) Gentilissimo! (fatta)

[roleoroleo]

Thank you for you donation. For home assistant, take a look here https://github.com/roleoroleo/yi-hack-Allwinner/wiki/Home-Assistant-integration or here https://github.com/EnricoFerro/yi-hack-to-mqtt

[a20691]

Hi.

I'm trying to hack a camera IFUSY65XV4, but with the firmware 9.0.36. Can any of you provide me the 9.0.19 firmware, i will try downgrade my camera. @roleoroleo do you think the downgrade could be a solution or a new hack have to be made? With this hack the camera is always restarting.

[roleoroleo]

Probably it's not a fw upgrade but a different model. Before trying to hack it, make a backup copy (follow the wiki).

[emnatsak]

Hello! same problem 😒 camera SN Y211... IFUSY65... FW : 9.0.36.xx With hack y21ga_0.1.5.tar the camera is always restarting. I made a backup - I can send it to you if necessary

[roleoroleo]

fw 9.0.36 means that this cam is not supported, send me a backup.

[emnatsak]

Hello! shoud I post backup file here? -link to backup was here- FW version 9.0.36.00_202011101611 also there is new FW 9.0.36.01_202103231716 I have not updated yet

[roleoroleo]

Your model is y211ga. Never seen. You can remove the link if you want.

[roleoroleo]

Please send me 2 or 3 copies of the file /dev/shm/fshare_frame_buf Make a copy, wait 5 seconds and make another copy.

[a20691]

Hello! shoud I post backup file here? https://www.dropbox.com/sh/2oh3jsr1918qqlh/AAADf_yO58V50g9v2lIGOPDaa?dl=0

FW version 9.0.36.00_202011101611 also there is new FW 9.0.36.01_202103231716 I have not updated yet

Be careful don't upgrade to this new firmware. My camera brick after that. The good thing was that I activated the warranty and they sent a new one with firmware 9.0.19 and is already with the hack working. Now I'll try unbrick the one with 9.0.36

[roleoroleo]

9.0.19 and 9.0.36 are fw for DIFFERENT models. Don't mix them.

[a20691]

Your model is y211ga. Never seen. You can remove the link if you want.

y291ga no?

[roleoroleo]

The label on the pcb is not important. Check the content of the file system.

[emnatsak]

Please send me 2 or 3 copies of the file /dev/shm/fshare_frame_buf Make a copy, wait 5 seconds and make another copy.

I do not know how to do it ;(

I have 2 identical cameras- do you need backup from the another camera?

[roleoroleo]

If you tried to hack this cam with y21ga hack, you should have ssh or telnet access. Use ssh to login and make the copies.

[a20691]

If you tried to hack this cam with y21ga hack, you should have ssh or telnet access. Use ssh to login and make the copies.

I can't try because the camera is bricked, but I don't believe because the camera is always restarting, at least it happens to me before it brick.

[emnatsak]

If you tried to hack this cam with y21ga hack, you should have ssh or telnet access. Use ssh to login and make the copies.

thanx. got it via telnet. user root and no pass

first attachment 3 files copy cp-fshare_frame_buf-1-2-3.zip second another way - 3 files cat cat-fshare_frame_buf-1-2-3.zip

[roleoroleo]

Try the last release.

[emnatsak]

Try the last release.

Hi! not working :( extracting the contents of y211ga_0.1.6.tgz to the root of SD card (tried with 2 SD) camera boots - yellow light for 3-5 sec then "click" then blinking blue light for 5-7 sec and camera goes to restart and again and again... removing SD card - camera boots normally and works as usually

any ideas?

[roleoroleo]

Probably the previous hack breaks something.

[emnatsak]

What should I do? reset? upgrade to new FW 9.0.36.01_202103231716 (now is FW version 9.0.36.00_202011101611)

[roleoroleo]

You should restore the original files.

[emnatsak]

You should restore the original files.

pls tell me right way to restore backup. can I use unhack_y21ga.tar.gz

[roleoroleo]

Restore at least /backup/init.sh Get it from here: https://github.com/roleoroleo/yi-hack-Allwinner-v2/blob/master/sdhack/y211ga/newbackup/init.sh

[emnatsak]

something does not work I took the init.sh file - it is identical to the same file in the y211ga_0.1.6.tgz hack connected by telenet and cp it in the camera. then I also checked the wifidhcp.sh file loaded into the camera, it is also identical to the same file in the y211ga_0.1.6.tgz hack but the problem remains - the hack doesn't apply

maybe I had to write the original files and reapply the hack? where can I get these files? Or is it better to do a full restore from a backup - is there a step-by-step guide somewhere?

[roleoroleo]

Do you have the serial connection connected?

[emnatsak]

Do you have the serial connection connected?

no/

BTW - I have second identical camera unpacked - with original software

[roleoroleo]

Make a backup copy (see the wiki).

[emnatsak]

Make a backup copy (see the wiki).

done backup/mtd.txt backup/mtdblock0.bin backup/mtdblock1.bin backup/mtdblock2.bin backup/mtdblock3.bin backup/mtdblock4.bin backup/mtdblock5.bin backup/mtdblock6.bin backup/mtdblock7.bin

can I use "Remove the hack" - unhack_y21ga.tar.gz?

[roleoroleo]

Check the updated wiki.

[emnatsak]

Check the updated wiki.

done unhack " y21ga model: unhack_y21ga.tar.gz " hack removed - no telnet access - connection refused then I tried to hack with y211ga_0.1.6.tgz and... sorry, with same result - camera boots - yellow light for 3-5 sec then "click" then blinking blue light for 5-7 sec and camera goes to restart

what I'm doing wrong?

[roleoroleo]

You should use unhack_y211ga.tar.gz But it doesn't matter, it doesn't change.

Sorry but it's non possible to make a diagnosis without a log. Try to edit etc/system.conf and to disable all services:

HTTPD=yes
TELNETD=yes
SSHD=yes
FTPD=no
BUSYBOX_FTPD=no
DISABLE_CLOUD=no
REC_WITHOUT_CLOUD=yes
MQTT=no
RTSP=no
RTSP_STREAM=both
RTSP_AUDIO=no
SPEAKER_AUDIO=no
ONVIF=no
ONVIF_WSDD=no
ONVIF_PROFILE=both
ONVIF_WM_SNAPSHOT=no
NTPD=no
NTP_SERVER=ntp1.inrim.it
PROXYCHAINSNG=no
SWAP_FILE=yes
RTSP_PORT=554
ONVIF_PORT=80
HTTPD_PORT=8080
USERNAME=
PASSWORD=
TIMEZONE=
FREE_SPACE=0
FTP_UPLOAD=no
FTP_HOST=
FTP_DIR=
FTP_DIR_TREE=no
FTP_USERNAME=
FTP_PASSWORD=
FTP_FILE_DELETE_AFTER_UPLOAD=yes
SSH_PASSWORD=
CRONTAB=
ONVIF_NETIF=wlan0

[roleoroleo]

Ah... Another question. How to you copy the file in the sd card? Which software are you using?

[emnatsak]

tell - and I send you all necessary files/logs

and - does anyone else hacked the same camera with success result? and - as I understand full restore from original backup (files - mtd.txt, mtdblock0.bin..mtdblock7.bin) will require disassembling the camera and access via the serial port - the issue cannot be solved programmatically - write it as a new firmware

[roleoroleo]

Check if the script files in yi-hack/script have the right format. LF vs CR-LF at the end of each line.

[emnatsak]

OS - Windows 10 copying file y211ga_0.1.6.tgz to clean formated SD card and then unpacking the archive by winrar into the root folder

if you want - I can give you access via remote desktop

[roleoroleo]

Try to use 7zip.

[emnatsak]

Try to use 7zip.

Hello! sorry - no result tried many different variations - ways to hack - clean formated SD (2pcs) - unhack done (no telnet) - reset camera - hacking y211ga_0.1.6 (unpacked by 7zip) - no result ok did full reset updated FW to latest FW 9.0.36.01 (before made one more backup) hacking y211ga_0.1.6 - no result - camera boots - yellow light for 3-5 sec then "click" then blinking blue light for 5-7 sec and camera goes to restart without SD with hack - camera boot normally.

Does anybody else with same camera did it (hack) with success result? sorry, maybe hack has a little mistake? I can send you all files you need

[emnatsak]

Try to edit etc/system.conf and to disable all services:

tried - with the same NO result