Closed An-100 closed 6 months ago
only /dev/mtdblock6.bin and /dev/mtdblock7.bin are diferent in both cameras.
If you clone mtd6 and mtd7 you will lose the internal settings: serial number, mac address, etc... And you won't be able to connect to the cloud because both cam will login to the cloud with the same serial. Try to resetting and restarting from scratch the second cam.
I have checked and the md5 from 1 to 5 and they are identical in both, I have installed your firmware and I have access to telnet, I have been able to see that the cloud command gives some errors of domains that do not exist, that is why I had assumed that when working in one and in the other not in the other the configuration or the command itself were different, I am almost 99.99% sure that it is their problem.
thanks for your time
If you clone mtd6 and mtd7 you will lose the internal settings: serial number, mac address, etc... And you won't be able to connect to the cloud because both cam will login to the cloud with the same serial. Try to resetting and restarting from scratch the second cam.
I repaired, i use mtd7 to repair mtd6, and now is paired.
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
I have Two cameras yi1080. 1.- work ok, and connect to cloud. 2.- work ok, i can reset, i can change wifi, i can found connected to mi router, put NOT connect to cloud.
Can i "clone" working camera to bad camera? i have backup /dev/mtdblock0.bin... 7 backup I have some computer and linux knowledge, can I make a dd of some partitions, which ones?
both have fw 9.0.19.02_202007141512
i can install hack-allwinner-v2 and work in "damaged" camera.