search

roleoroleo / yi-hack-Allwinner-v2

Custom firmware for Yi 1080p camera based on Allwinner platform
MIT License
753 stars 90 forks source link

YI 2k Pro restarts #802

Closed jacyker closed 1 month ago

jacyker commented 5 months ago

I test various settings, but I don't think there is a rule - YI Home 2k Pro Camera (YFUSY, y623) restarts eg when taking high res snapshot. I tried different combinations of settings, different cards, including SanDisk Extreme Pro, and even different WiFi networks... Any idea?

roleoroleo commented 5 months ago

Is the swap file enabled?

Dotatay commented 5 months ago

I have two y623 (ZFUS, 12.0.51) models and with the activated swap file, the cameras have been running without errors for weeks. (my comment may not be helpful due to a different serial number and larger differences)

jacyker commented 5 months ago

Yes, swap enabled. Overall, the camera works OK, but trying to trigger a high res snapshot causes a restart. 2 different pieces, with different production dates, but the same effect. Sometimes it works, but most often it doesn't. And I'm already messing around with various settings, even such as MQTT... I also checked different cards...

And this observation: I reset the settings, set what I need one by one, and immediately run tests (reboot + snap 3-4 times). It works like this until at some point it stops and loading previously saved settings helps. But in numerous tests, I haven't found that one setting that starts to cause a problem. Sometimes it's e.g. MQTT, sometimes motion detection, and other times... It just works until a problem occurs and from then on it restarts with High res snapshot.

jacyker commented 5 months ago

I uploaded this version and it seems better for now: https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/753#issuecomment-1817956471

But maybe it's just a coincidence ;-)

roleoroleo commented 5 months ago

But maybe it's just a coincidence ;-)

Yes, there are no changes about memory or snapshot. Maybe the sd card is not ok? Try another card.

barbigss commented 5 months ago

could you try with private mode disabled? (Disable Cloud not enabled in web interface) I have a similar problem, see #796

jacyker commented 5 months ago

@roleoroleo : The cards are definitely good - new, tested with external programs, fast (even SanDisk Extreme, Extreme Pro). Well, maybe it's a coincidence, but after uploading this version it seems OK for now, but I'll do a bigger test after the weekend. It's possible I just haven't activated something yet that's having an effect. Or maybe it's simply a matter of load, because the "load average" can jump above 10-11. Maybe YI went crazy and gave a higher resolution than the hardware can actually handle.

@barbigss : cloud (YI Cloud) is active

github-actions[bot] commented 2 months ago

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.