search

roleoroleo / yi-hack-Allwinner-v2

Custom firmware for Yi 1080p camera based on Allwinner platform
MIT License
752 stars 90 forks source link

problem with RFUSY v.9.0.19 #833

Open ironhide9090 opened 4 months ago

ironhide9090 commented 4 months ago

Hi everyone, I have a "YI Home camera 1080p" camera with firmware 9.0.19.12_202102241808 model RFUSY44, dismantling the camera on the card it says "Y29GA_MB_V2.1 2020/04/07". I tried to install the y211ga, y28ga, y29ga versions. they all work until I restart them and then they no longer connect to the wifi, they flash blue and I have to completely reset them. Can anyone tell me which version is right for this camera? Thank you

roleoroleo commented 3 months ago

y21ga

ironhide9090 commented 3 months ago

same thing with this version, it works until I turn off the power. I have 4 cameras like this and on all of them it is the same faulty

roleoroleo commented 3 months ago

What's the content of the sd card after you apply the hack?

ironhide9090 commented 3 months ago

With this last test it restarted but every minute it rebooted. I have attached all the contents of the SD. Thanks SD.zip

ironhide9090 commented 3 months ago

today I tried the "y21ga_0.3.0" version and it works even after removing the voltage. I tried to enable the "Enable/disable time OSD" and when reset it doesn't start again, this should be the problem

roleoroleo commented 3 months ago

Probably a race condition. Not simple to fix it. rmm process doesn't start and the watchdog restarts the cam. Could you try with another sd card?

ironhide9090 commented 3 months ago

I tried with a new SD card. everything works except enabling the "Enable/disable time OSD", you were very kind, thank you!!

roleoroleo commented 3 months ago

So, when you enable "Time OSD" and reboot the cam doesn't restart. Correct?

What's the behavior? Is the cam in bootloop (reboot continuously) or not? What color is the led?

ironhide9090 commented 3 months ago

Yes, exactly, the problem appears when I enable "Time OSD", if you restart from the web page it works fine, but if I turn it off and on by unplugging the power it no longer connects to the wifi (the LED is blue and flashes) and you are forced to perform the reset from the button. Today I also tried with version 0.3.1 with a new SD and it has the same problem

roleoroleo commented 3 months ago

If the blue led flashes, the cam didn't save the wifi credentials. Try to pair the cam without the sd card. When the cam is paired reboot it 2 or 3 times. If it works, insert again the sd card.

ironhide9090 commented 3 months ago

I tried to do as you told me, the problem remains, it works fine until I activate "time OSD". for me there are no problems. at least others like this can know it too.

roleoroleo commented 3 months ago

Try to switch off "Time OSD". Does the cam restart?

You need to remove the card and edit manually the file yi-hack/etc/system.conf

ironhide9090 commented 3 months ago

Today to do the test the cam restarted by disabling "time OSD"! I tried on all the cameras, I can't give an explanation, could it be that it takes time to save the wifi credentials?

roleoroleo commented 3 months ago

Today to do the test the cam restarted by disabling "time OSD"! I tried on all the cameras, I can't give an explanation, could it be that it takes time to save the wifi credentials?

I think it's not possible. But I don't understand the problem. Is swap enabled? Maybe a memory issue...

bulletyhasor commented 2 months ago

FYI: see my issue related with bad reboot and wifi SSID