search

roleoroleo / yi-hack-Allwinner-v2

Custom firmware for Yi 1080p camera based on Allwinner platform
MIT License
752 stars 90 forks source link

Yi Home 1080P - RFUSY62F3J - Unable to install #835

Open Zoft123 opened 3 months ago

Zoft123 commented 3 months ago

I have a couple of Yi Home 1080P cameras I got awhile back from a 5-pack deal on Amazon and I came across this and was interested to try it out. Here is some information on these cameras ahead of time:

QR code shows: RFUSY62F3J Processor inside is listed as: QG2101A Mainboard has written on it: y291ga_mb_v3.1 FW Ver: 12.0.35.8_202211241029

I have now tried 7 different SD-Cards varying in size anywhere from 8GB - 64GB and all of it ends up with the same result, insert the SD card with the files written to it, plug in the camera, a solid yellow light appears for ~30 seconds, blinks once, yellow light comes back for another ~30 seconds, the shutter sound occurs, and then it goes to a blue blinking light from there it's back online however I am not able to connect to it via SSH nor the IP.

Inside the SD card -- after -- the attempt to install this hack it changes my Factory folder to: Factory.done but none of the hacks are working?

Because I'm at a loss for any additional troubleshooting and my last hope is maybe I did something wrong in the process of attempting this I will list my steps 1 by 1 to confirm.

Downloaded y291ga_0.3.1.tgz from the Releases page. Formatted the SD card inside the Yi Home app to ensure it is FAT32. Unplugged camera, inserted SD card into PC, removed all files. Copied the y291ga_0.3.1.tgz to the SD card and extracted the contents to the root of the SD card, then deleted the .tgz file. Root of my SD card mirrored what is listed on the 'Installation' section of this page. 'Safely' ejected my SD card, put it into the camera, and above is the end result every single time.

Additional things I've tried: Using diskpart in Windows to clean the SD card and format it to FAT32. Using both 7z & 'tar -xvzf y291ga_0.3.1.tgz` to extract the tgz file to the root of my SD card. Tried 7 total SD cards, and attempted this on all 5 cameras to ensure that it wasn't an issue with only 1 of them, it isn't it's not working for any of them. I'm not sure if the requested submission for things like this is the entire SD card or just the backup folder after an attempt is made so I uploaded both.

https://drive.google.com/file/d/10deJ6dD5Et6vfxD1A7kI0nU-YLRbmaNc/view?usp=sharing https://drive.google.com/file/d/10fk5_qPruTm3lOUdN4NO6cC4HQOjhW8f/view?usp=sharing

Any help at all would be greatly appreciated.

roleoroleo commented 3 months ago

If the Factory folder was renamed to Factory.done, the hack worked. It could be a problem in the startup process. If you are unable to login with ssh, try with telnet, it should work. Run a ps command and post the output.

roleoroleo commented 2 months ago

I don't understand if the cam is in bootloop. When the led turns blue, does cam restart? Or it's running stable.

If ssh is not running try telnet.