search

roleoroleo / yi-hack-Allwinner-v2

Custom firmware for Yi 1080p camera based on Allwinner platform
MIT License
752 stars 90 forks source link

Manual time not sticking after reboot #857

Closed gne5 closed 2 months ago

gne5 commented 2 months ago

Wondering if this can be changed to not reset after a reboot?

If the camera is not connected to the internet and I set the date & time via telnet with: [date -s "YYYY-MM-DD HH:MM:SS"] then it resets after reboot. And I get random reboots sometimes when it switches to and from IR night mode.

I tried enabling my router to act as a NTP time server and changed the address in the camera settings to the router IP but still no auto timing.

y21ga - v0.3.1

roleoroleo commented 2 months ago

The cam has no battery and it's not able to keep the time after a reboot. But, with ntp it should work. Are you sure your ntp is working properly?

gne5 commented 2 months ago

It was an error in my routing, my bad. It's working now from the routers NTP server.

Thanks for the work. One small request is to add batch delete for videos.

roleoroleo commented 2 months ago

One small request is to add batch delete for videos.

There are 2 methods for this: