search

roleoroleo / yi-hack-Allwinner-v2

Custom firmware for Yi 1080p camera based on Allwinner platform
MIT License
858 stars 98 forks source link

Wifi deconnection ; time #951

Open gtrhayrug opened 1 month ago

gtrhayrug commented 1 month ago

Hi, I open a new issue to don't "troll" the other.

I have a lot of wifi disconnection ; once per day approximativelly. A simple power off, on and after it is okay. Wifi strength is 97%... the router wifi is just at 50cm... image

I've tried to change the RTSP server but i loose motioneye support... I've changed the SD card ; new one.

I've tried to minimize the services : disable cloud, recording without cloud, no onvif, just ssh+no ftp+ntpd+httpd

image

Even if I have configure Europe/Paris ; the clock is 2h before the real hour... any idea ? (NTP is configured).

roleoroleo commented 1 month ago

Does the cam reboot when it disconnect from the network? Check the uptime.

gtrhayrug commented 1 month ago

I've no idea because i can't access to the html page when the cam is disconnected. I need to unplug/plug and after the camera is available. So the uptime will be at 0.

What about my other question about NTP false time ? Even if I have configure Europe/Paris ; the clock is 2h before the real hour... any idea ? (NTP is configured).

roleoroleo commented 1 month ago

Where do you read "2h before the real hour"?

gtrhayrug commented 1 month ago

If it was 6:52pm now, the camera shows 4:52 even if I have selected the good timezone.

roleoroleo commented 4 weeks ago

If it was 6:52pm now, the camera shows 4:52 even if I have selected the good timezone.

Where? Web gui, ssh session, osd...

gtrhayrug commented 3 weeks ago

Some news. I've restarted the router, no deconnection issue since it.

About the hour, in the yi-hack web page : image even if the timezone is correct : image and NTPd is active : image same in the snapshot (osd + hack) : image image

even if it is at the same time, really : image

roleoroleo commented 3 weeks ago

Please check if the time is properly saved in system.conf cat /tmp/sd/yi-hack/etc/system.conf | grep TIMEZONE

Is the camera protected by a firewall?

gtrhayrug commented 3 weeks ago

Seems to be Ok : image

Now it is image date reports : image Same in the webpage : image

I'll using NTP server on my VMs without trouble since few years. Same for other cameras. Per example, on my MotionEye VM, all time are okays :). image

roleoroleo commented 2 weeks ago

The time is ok. The problem is the timezone. I'll check my y623.

roleoroleo commented 1 week ago

My y623 is ok. immagine

Please, try Europe/Rome and check if it works.