Stream no longer available after Update to 0.4.5

[smartmatic]

Hi,

i am using this Integration for a while. I've updated now from 0.4.2 to the 0.4.5. The Cameras are updated as well to the latest firmware.

But no i am no longer abler to open the stream from both cams i am using. They are shown as off.

Also WebRTC throws an error probably as the cams are off.

So i stuck a bit as i can open the stream via HTTP and access the yi-hack web frontend.

Please support.

[roleoroleo]

Does it work with VLC?

EDIT

Pay attention, camera is off. Switch on the cam.

[smartmatic]

Does it work with VLC?

Yes, works with VLC

EDIT

Pay attention, camera is off. Switch on the cam.

Switch is On

[roleoroleo]

It seems the camera is off.

Check my cam. Switch off:

Switch on:

[smartmatic]

In my case turn on the switches does have en effect. The cam stays off

[roleoroleo]

Please, try to remove the device from ha and reinstall it.

[smartmatic]

Please, try to remove the device from ha and reinstall it.

I removed the camera and added it again but the status remains the same as off. I've activated the debug log but it produces nothing helpful. Only that the entities are registered. So i decided to downgrade to 0.4.2 and it worked again.

[roleoroleo]

What is the firmware version of the cam?

[smartmatic]

Its 0.2.7

[roleoroleo]

Strange... This problem happens when the cam has an old firmware version.

[MrMarble]

I'm having the same problem with camera running firmware 0.4.9 and 0.5.0

[roleoroleo]

I tested again with my cams and I'm not able to replicate the problem. Please, restart from scratch.

• Check if your cam has the latest firmware.
• Check if mqtt integration is enabled in your ha.
• Update integration to the latest version.
• Remove the cam from the device list and add it again.

If it doesn't work, please share the system.conf of the cam (clean your personal data).

[smartmatic]

I've updated my cameras as well as the integration to the latest release and everything went well. Please close the issue