search

romanseidl / MillControl

Arduino Coffee Grinder Control
GNU General Public License v3.0
16 stars 9 forks source link

Scale couldn't calibrated #4

Open free118 opened 4 years ago

free118 commented 4 years ago

Hello Roman, I'm not sure if you have seen my post here.[https://www.kaffee-netz.de/threads/millcontrol-arduino-muehlensteuerung-mit-timer-gewichtsautomatik-waagensteuerung-und-brew-timer.95553/page-10]

The problem is still there. I dig a little bit in your code. So i found out that my scale is working and i get sufficent values. e.g. data = 8870400 data + 50g = ~8920450 noise = 15844 So I think the scale it self is fine. Also the date/noise ratio looks good.

So i don't know why the calibration didn't work. I get stucked in the Tare UI. After pressing long on the encoder button (I have just the encoder button), the scale swicht on and tare. After the next click i get into the tare screen. In here the Checkmark and the X button are which out function. Do you know what to do? Or what i try /debug ? Thanks

Finnitio commented 2 years ago

Hey,

have you been able find a solution. So I have everything set up and it seems to work, but I don't really know how to calibrate the scale.