The Connection between right prompt lines is out of alignment when using emoji at the left prompt

when I configure .p10k.zsh file, I put a 🗂 emoji in front of the sub-home directory.

typeset -g POWERLEVEL9K_HOME_ICON='🏠'  
typeset -g POWERLEVEL9K_HOME_SUB_ICON='🗂 '  
typeset -g POWERLEVEL9K_FOLDER_ICON='💼'

But In the command line, the 'connection line' between right prompt lines is out of alignment.

When I turn back to the home directory, everything looks fine. So How could I make the two symbols (─╮and ─╯)alignment.

my .p10k.zsh file 👇

# Generated by Powerlevel10k configuration wizard on 2022-07-05 at 01:17 CST.
# Based on romkatv/powerlevel10k/config/p10k-rainbow.zsh, checksum 24045.
# Wizard options: nerdfont-complete + powerline, small icons, rainbow, unicode,
# vertical separators, blurred heads, flat tails, 2 lines, disconnected, full frame,
# dark-ornaments, sparse, many icons, concise, transient_prompt, instant_prompt=verbose.
# Type `p10k configure` to generate another config.
#
# Config for Powerlevel10k with powerline prompt style with colorful background.
# Type `p10k configure` to generate your own config based on it.
#
# Tip: Looking for a nice color? Here's a one-liner to print colormap.
#
#   for i in {0..255}; do print -Pn "%K{$i}  %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done

# Temporarily change options.
'builtin' 'local' '-a' 'p10k_config_opts'
[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'

() {
  emulate -L zsh -o extended_glob

  # Unset all configuration options. This allows you to apply configuration changes without
  # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
  unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR'

  # Zsh >= 5.1 is required.
  autoload -Uz is-at-least && is-at-least 5.1 || return

  # The list of segments shown on the left. Fill it with the most important segments.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
    # =========================[ Line #1 ]=========================
    os_icon                 # os identifier
    dir                     # current directory
    vcs                     # git status
    # =========================[ Line #2 ]=========================
    newline                 # \n
    # prompt_char           # prompt symbol
  )

  # The list of segments shown on the right. Fill it with less important segments.
  # Right prompt on the last prompt line (where you are typing your commands) gets
  # automatically hidden when the input line reaches it. Right prompt above the
  # last prompt line gets hidden if it would overlap with left prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
    # =========================[ Line #1 ]=========================
    status                  # exit code of the last command
    command_execution_time  # duration of the last command
    background_jobs         # presence of background jobs
    direnv                  # direnv status (https://direnv.net/)
    asdf                    # asdf version manager (https://github.com/asdf-vm/asdf)
    virtualenv              # python virtual environment (https://docs.python.org/3/library/venv.html)
    anaconda                # conda environment (https://conda.io/)
    pyenv                   # python environment (https://github.com/pyenv/pyenv)
    goenv                   # go environment (https://github.com/syndbg/goenv)
    nodenv                  # node.js version from nodenv (https://github.com/nodenv/nodenv)
    nvm                     # node.js version from nvm (https://github.com/nvm-sh/nvm)
    nodeenv                 # node.js environment (https://github.com/ekalinin/nodeenv)
    # node_version          # node.js version
    # go_version            # go version (https://golang.org)
    # rust_version          # rustc version (https://www.rust-lang.org)
    # dotnet_version        # .NET version (https://dotnet.microsoft.com)
    # php_version           # php version (https://www.php.net/)
    # laravel_version       # laravel php framework version (https://laravel.com/)
    # java_version          # java version (https://www.java.com/)
    # package               # name@version from package.json (https://docs.npmjs.com/files/package.json)
    rbenv                   # ruby version from rbenv (https://github.com/rbenv/rbenv)
    rvm                     # ruby version from rvm (https://rvm.io)
    fvm                     # flutter version management (https://github.com/leoafarias/fvm)
    luaenv                  # lua version from luaenv (https://github.com/cehoffman/luaenv)
    jenv                    # java version from jenv (https://github.com/jenv/jenv)
    plenv                   # perl version from plenv (https://github.com/tokuhirom/plenv)
    perlbrew                # perl version from perlbrew (https://github.com/gugod/App-perlbrew)
    phpenv                  # php version from phpenv (https://github.com/phpenv/phpenv)
    scalaenv                # scala version from scalaenv (https://github.com/scalaenv/scalaenv)
    haskell_stack           # haskell version from stack (https://haskellstack.org/)
    kubecontext             # current kubernetes context (https://kubernetes.io/)
    terraform               # terraform workspace (https://www.terraform.io)
    # terraform_version     # terraform version (https://www.terraform.io)
    aws                     # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html)
    aws_eb_env              # aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/)
    azure                   # azure account name (https://docs.microsoft.com/en-us/cli/azure)
    gcloud                  # google cloud cli account and project (https://cloud.google.com/)
    google_app_cred         # google application credentials (https://cloud.google.com/docs/authentication/production)
    toolbox                 # toolbox name (https://github.com/containers/toolbox)
    context                 # user@hostname
    nordvpn                 # nordvpn connection status, linux only (https://nordvpn.com/)
    ranger                  # ranger shell (https://github.com/ranger/ranger)
    nnn                     # nnn shell (https://github.com/jarun/nnn)
    xplr                    # xplr shell (https://github.com/sayanarijit/xplr)
    vim_shell               # vim shell indicator (:sh)
    midnight_commander      # midnight commander shell (https://midnight-commander.org/)
    nix_shell               # nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html)
    vi_mode                 # vi mode (you don't need this if you've enabled prompt_char)
    # vpn_ip                # virtual private network indicator
    # load                  # CPU load
    # disk_usage            # disk usage
    # ram                   # free RAM
    # swap                  # used swap
    todo                    # todo items (https://github.com/todotxt/todo.txt-cli)
    timewarrior             # timewarrior tracking status (https://timewarrior.net/)
    taskwarrior             # taskwarrior task count (https://taskwarrior.org/)
    # time                  # current time
    # =========================[ Line #2 ]=========================
    newline
    # ip                    # ip address and bandwidth usage for a specified network interface
    # public_ip             # public IP address
    # proxy                 # system-wide http/https/ftp proxy
    # battery               # internal battery
    # wifi                  # wifi speed
    # example               # example user-defined segment (see prompt_example function below)
  )

  # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
  typeset -g POWERLEVEL9K_MODE=nerdfont-complete
  # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
  # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
  typeset -g POWERLEVEL9K_ICON_PADDING=none

  # When set to true, icons appear before content on both sides of the prompt. When set
  # to false, icons go after content. If empty or not set, icons go before content in the left
  # prompt and after content in the right prompt.
  #
  # You can also override it for a specific segment:
  #
  #   POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
  #
  # Or for a specific segment in specific state:
  #
  #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=

  # Add an empty line before each prompt.
  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true

  # Connect left prompt lines with these symbols. You'll probably want to use the same color
  # as POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND below.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX='%240F╭─'
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX='%240F├─'
  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX='%240F╰─'
  # Connect right prompt lines with these symbols.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX='%240F─╮'
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX='%240F─┤'
  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX='%240F─╯'

  # Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or
  # '─'. The last two make it easier to see the alignment between left and right prompt and to
  # separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
  # for more compact prompt if using this option.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='-'
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND=
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_GAP_BACKGROUND=
  if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
    # The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE
    # ornaments defined above.
    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=240
    # Start filler from the edge of the screen if there are no left segments on the first line.
    typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
    # End filler on the edge of the screen if there are no right segments on the first line.
    typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}'
  fi

  # Separator between same-color segments on the left.
  typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='\u2502'
  # Separator between same-color segments on the right.
  typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='\u2502'
  # Separator between different-color segments on the left.
  typeset -g POWERLEVEL9K_LEFT_SEGMENT_SEPARATOR=''
  # Separator between different-color segments on the right.
  typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR=''
  # The right end of left prompt.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='▓▒░'
  # The left end of right prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='░▒▓'
  # The left end of left prompt.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=''
  # The right end of right prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
  # Left prompt terminator for lines without any segments.
  typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='﵂'

  #################################[ os_icon: os identifier ]##################################
  # OS identifier color.
  typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=232
  typeset -g POWERLEVEL9K_OS_ICON_BACKGROUND=2
  # Custom icon.
  typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='🌈'

  ################################[ prompt_char: prompt symbol ]################################
  # Transparent background.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_BACKGROUND=
  # Green prompt symbol if the last command succeeded.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=76
  # Red prompt symbol if the last command failed.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=196
  # Default prompt symbol.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
  # Prompt symbol in command vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
  # Prompt symbol in visual vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
  # Prompt symbol in overwrite vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
  # No line terminator if prompt_char is the last segment.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
  # No line introducer if prompt_char is the first segment.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
  # No surrounding whitespace.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_{LEFT,RIGHT}_WHITESPACE=
  typeset -g POWERLEVEL9K_HOME_ICON='🏠'
  typeset -g POWERLEVEL9K_HOME_SUB_ICON='🗂 '
  typeset -g POWERLEVEL9K_FOLDER_ICON='💼'
  ##################################[ dir: current directory ]##################################
  # Current directory background color.
  typeset -g POWERLEVEL9K_DIR_BACKGROUND=4
  # Default current directory foreground color.
  typeset -g POWERLEVEL9K_DIR_FOREGROUND=254
  # If directory is too long, shorten some of its segments to the shortest possible unique
  # prefix. The shortened directory can be tab-completed to the original.
  typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
  # Replace removed segment suffixes with this symbol.
  typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
  # Color of the shortened directory segments.
  typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=250
  # Color of the anchor directory segments. Anchor segments are never shortened. The first
  # segment is always an anchor.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=255
  # Display anchor directory segments in bold.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=true
  # Don't shorten directories that contain any of these files. They are anchors.
  local anchor_files=(
    .bzr
    .citc
    .git
    .hg
    .node-version
    .python-version
    .go-version
    .ruby-version
    .lua-version
    .java-version
    .perl-version
    .php-version
    .tool-version
    .shorten_folder_marker
    .svn
    .terraform
    CVS
    Cargo.toml
    composer.json
    go.mod
    package.json
    stack.yaml
  )
  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
  # If set to "first" ("last"), remove everything before the first (last) subdirectory that contains
  # files matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is
  # /foo/bar/git_repo/nested_git_repo/baz, prompt will display git_repo/nested_git_repo/baz (first)
  # or nested_git_repo/baz (last). This assumes that git_repo and nested_git_repo contain markers
  # and other directories don't.
  #
  # Optionally, "first" and "last" can be followed by ":<offset>" where <offset> is an integer.
  # This moves the truncation point to the right (positive offset) or to the left (negative offset)
  # relative to the marker. Plain "first" and "last" are equivalent to "first:0" and "last:0"
  # respectively.
  typeset -g POWERLEVEL9K_DIR_TRUNCATE_BEFORE_MARKER=false
  # Don't shorten this many last directory segments. They are anchors.
  typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
  # Shorten directory if it's longer than this even if there is space for it. The value can
  # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
  # directory will be shortened only when prompt doesn't fit or when other parameters demand it
  # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
  # If set to `0`, directory will always be shortened to its minimum length.
  typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
  # many columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
  # If set to true, embed a hyperlink into the directory. Useful for quickly
  # opening a directory in the file manager simply by clicking the link.
  # Can also be handy when the directory is shortened, as it allows you to see
  # the full directory that was used in previous commands.
  typeset -g POWERLEVEL9K_DIR_HYPERLINK=false

  # Enable special styling for non-writable and non-existent directories. See POWERLEVEL9K_LOCK_ICON
  # and POWERLEVEL9K_DIR_CLASSES below.
  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v3

  # The default icon shown next to non-writable and non-existent directories when
  # POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3.
  typeset -g POWERLEVEL9K_LOCK_ICON='🔒'

  # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons and colors for different
  # directories. It must be an array with 3 * N elements. Each triplet consists of:
  #
  #   1. A pattern against which the current directory ($PWD) is matched. Matching is done with
  #      extended_glob option enabled.
  #   2. Directory class for the purpose of styling.
  #   3. An empty string.
  #
  # Triplets are tried in order. The first triplet whose pattern matches $PWD wins.
  #
  # If POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3, non-writable and non-existent directories
  # acquire class suffix _NOT_WRITABLE and NON_EXISTENT respectively.
  #
  # For example, given these settings:
  #
  #   typeset -g POWERLEVEL9K_DIR_CLASSES=(
  #     '~/work(|/*)'  WORK     ''
  #     '~(|/*)'       HOME     ''
  #     '*'            DEFAULT  '')
  #
  # Whenever the current directory is ~/work or a subdirectory of ~/work, it gets styled with one
  # of the following classes depending on its writability and existence: WORK, WORK_NOT_WRITABLE or
  # WORK_NON_EXISTENT.
  #
  # Simply assigning classes to directories doesn't have any visible effects. It merely gives you an
  # option to define custom colors and icons for different directory classes.
  #
  #   # Styling for WORK.
  #   typeset -g POWERLEVEL9K_DIR_WORK_VISUAL_IDENTIFIER_EXPANSION='⭐'
  #   typeset -g POWERLEVEL9K_DIR_WORK_BACKGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=254
  #   typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=250
  #   typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=255
  #
  #   # Styling for WORK_NOT_WRITABLE.
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐'
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_BACKGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND=254
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_SHORTENED_FOREGROUND=250
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_ANCHOR_FOREGROUND=255
  #
  #   # Styling for WORK_NON_EXISTENT.
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_VISUAL_IDENTIFIER_EXPANSION='⭐'
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_BACKGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_FOREGROUND=254
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_SHORTENED_FOREGROUND=250
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_ANCHOR_FOREGROUND=255
  #
  # If a styling parameter isn't explicitly defined for some class, it falls back to the classless
  # parameter. For example, if POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND is not set, it falls
  # back to POWERLEVEL9K_DIR_FOREGROUND.
  #
  # typeset -g POWERLEVEL9K_DIR_CLASSES=()

  # Custom prefix.
  # typeset -g POWERLEVEL9K_DIR_PREFIX='in '

  #####################################[ vcs: git status ]######################################
  # Version control system colors.
  typeset -g POWERLEVEL9K_VCS_CLEAN_BACKGROUND=2
  typeset -g POWERLEVEL9K_VCS_MODIFIED_BACKGROUND=3
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_BACKGROUND=2
  typeset -g POWERLEVEL9K_VCS_CONFLICTED_BACKGROUND=3
  typeset -g POWERLEVEL9K_VCS_LOADING_BACKGROUND=8

  # Branch icon. Set this parameter to '\UE0A0 \uF126 ' for the popular Powerline branch icon.
  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON='\UE0A0 '

  # Untracked files icon. It's really a question mark, your font isn't broken.
  # Change the value of this parameter to show a different icon.
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'

  # Formatter for Git status.
  #
  # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
  #
  # You can edit the function to customize how Git status looks.
  #
  # VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
  # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
  function my_git_formatter() {
    emulate -L zsh

    if [[ -n $P9K_CONTENT ]]; then
      # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
      # gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
      typeset -g my_git_format=$P9K_CONTENT
      return
    fi

    # Styling for different parts of Git status.
    local       meta='%7F' # white foreground
    local      clean='%7F' # black foreground
    local   modified='%7F' # black foreground
    local  untracked='%7F' # black foreground
    local conflicted='%1F' # red foreground

    local res

    if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
      local branch=${(V)VCS_STATUS_LOCAL_BRANCH}
      # If local branch name is at most 32 characters long, show it in full.
      # Otherwise show the first 12 … the last 12.
      # Tip: To always show local branch name in full without truncation, delete the next line.
      (( $#branch > 32 )) && branch[13,-13]="…"  # <-- this line
      res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}"
    fi

    if [[ -n $VCS_STATUS_TAG
          # Show tag only if not on a branch.
          # Tip: To always show tag, delete the next line.
          && -z $VCS_STATUS_LOCAL_BRANCH  # <-- this line
        ]]; then
      local tag=${(V)VCS_STATUS_TAG}
      # If tag name is at most 32 characters long, show it in full.
      # Otherwise show the first 12 … the last 12.
      # Tip: To always show tag name in full without truncation, delete the next line.
      (( $#tag > 32 )) && tag[13,-13]="…"  # <-- this line
      res+="${meta}#${clean}${tag//\%/%%}"
    fi

    # Display the current Git commit if there is no branch and no tag.
    # Tip: To always display the current Git commit, delete the next line.
    [[ -z $VCS_STATUS_LOCAL_BRANCH && -z $VCS_STATUS_TAG ]] &&  # <-- this line
      res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}"

    # Show tracking branch name if it differs from local branch.
    if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
      res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"
    fi

    # Display "wip" if the latest commit's summary contains "wip" or "WIP".
    if [[ $VCS_STATUS_COMMIT_SUMMARY == (|*[^[:alnum:]])(wip|WIP)(|[^[:alnum:]]*) ]]; then
      res+=" ${modified}wip"
    fi

    # ⇣42 if behind the remote.
    (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
    # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
    (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
    (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
    # ⇠42 if behind the push remote.
    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}"
    (( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" "
    # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
    # *42 if have stashes.
    (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
    # 'merge' if the repo is in an unusual state.
    [[ -n $VCS_STATUS_ACTION     ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
    # ~42 if have merge conflicts.
    (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
    # +42 if have staged changes.
    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
    # !42 if have unstaged changes.
    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
    # ?42 if have untracked files. It's really a question mark, your font isn't broken.
    # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
    # Remove the next line if you don't want to see untracked files at all.
    (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
    # "─" if the number of unstaged files is unknown. This can happen due to
    # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
    # than the number of files in the Git index, or due to bash.showDirtyState being set to false
    # in the repository config. The number of staged and untracked files may also be unknown
    # in this case.
    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─"

    typeset -g my_git_format=$res
  }
  functions -M my_git_formatter 2>/dev/null

  # Don't count the number of unstaged, untracked and conflicted files in Git repositories with
  # more than this many files in the index. Negative value means infinity.
  #
  # If you are working in Git repositories with tens of millions of files and seeing performance
  # sagging, try setting POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY to a number lower than the output
  # of `git ls-files | wc -l`. Alternatively, add `bash.showDirtyState = false` to the repository's
  # config: `git config bash.showDirtyState false`.
  typeset -g POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY=-1

  # Don't show Git status in prompt for repositories whose workdir matches this pattern.
  # For example, if set to '~', the Git repository at $HOME/.git will be ignored.
  # Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'.
  typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~'

  # Disable the default Git status formatting.
  typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
  # Install our own Git status formatter.
  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter()))+${my_git_format}}'
  # Enable counters for staged, unstaged, etc.
  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1

  # Custom icon.
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=''
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR='white'

  # Custom prefix.
  # typeset -g POWERLEVEL9K_VCS_PREFIX='on '

  # Show status of repositories of these types. You can add svn and/or hg if you are
  # using them. If you do, your prompt may become slow even when your current directory
  # isn't in an svn or hg repository.
  typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)

  ##########################[ status: exit code of the last command ]###########################
  # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
  # style them independently from the regular OK and ERROR state.
  typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true

  # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
  # it will signify success by turning green.
  typeset -g POWERLEVEL9K_STATUS_OK=true
  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✅'
  typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
  typeset -g POWERLEVEL9K_STATUS_OK_BACKGROUND=0

  # Status when some part of a pipe command fails but the overall✔ exit status is zero. It may look
  # like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✅'
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_BACKGROUND=0

  # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
  # it will signify error by turning red.
  typeset -g POWERLEVEL9K_STATUS_ERROR=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='❌'
  typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=3
  typeset -g POWERLEVEL9K_STATUS_ERROR_BACKGROUND=1

  # Status when the last command was terminated by a signal.
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
  # Use terse signal names: "INT" instead of "SIGINT(2)"✘.
  typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='❌'
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=3
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_BACKGROUND=1

  # Status when some part of a pipe command fails and the overall exit status is also non-zero.
  # It may look like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='❌'
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=3
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_BACKGROUND=1

  ###################[ command_execution_time: duration of the last command ]###################
  # Execution time color.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=007
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_BACKGROUND=010
  # Show duration of the last command if takes at least this many seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
  # Show this many fractional digits. Zero means round to seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
  # Duration format: 1d 2h 3m 4s.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
  # Custom icon.
  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION='⏳'
  # Custom prefix.
  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='took '
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_BOLD=true
  #######################[ background_jobs: presence of background jobs ]#######################
  # Background jobs color.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=6
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_BACKGROUND=0
  # Don't show the number of background jobs.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #######################[ direnv: direnv status (https://direnv.net/) ]########################
  # Direnv color.
  typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=3
  typeset -g POWERLEVEL9K_DIRENV_BACKGROUND=0
  # Custom icon.
  # typeset -g POWERLEVEL9K_DIRENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

romkatv / powerlevel10k

The Connection between right prompt lines is out of alignment when using emoji at the left prompt #1927